V-ZUG WS60283 - User Manual
A Installation Manual for built-in warming, system, and vacuum drawers covers essential safety protocols, including qualified personnel requirements, low-voltage compliance, and fire protection standards. The guide details mounting methods using specific bracket sets (e.g., 55 or 60) with model-specific screw placements, while also addressing dimensional specifications for integration into cabinets, ovens, or coffee centers. Adjustment procedures–such as depth and height modifications via eccentric components or screws–are included alongside filter assembly instructions for vacuum models.
Table of Contents:
- Page 1 – Safety Requirements for Drawer Installation
- Page 2 – Mounting Instructions and Model Specifications
- Page 3 – Solo Drawer Installation Dimensions and Clearances
- Page 4 – Drawer Installation with Oven and Coffee Center
- Page 5 – Cabinet Dimensions for Drawer Integration
- Page 6 – Adjusting Drawer Depth and Height
- Page 7 – Vacuum Drawer Air Filter Assembly
Installation instructions
55162 - 60312
Warming drawer / system drawer / vacuum drawer
J34008113-R03
22/04/2016
1
The appliance should be installed by qualified personnel only.
Each step must be carried out and checked in full in the order specified.
Validity
These installation instructions apply to the models: 34008, 34009, 34010, 34011, 34012, 34013, 34014, 35001,
35002 and 36001.
General notes
If installing into a combustible material, the guidelines and standards for low voltage installations and fire
protection must be strictly observed.
Identification plate
▸
Remove the drawer. The identification plate is located on the left-hand side next to the dial.
Electrical connections
Electrical connections must be carried out by qualified personnel in accordance with the guidelines and
standards for low-voltage installations and the specifications of the local electricity supply companies.
A plug-in appliance may only be connected to a socket outlet with earthing contact, installed according to spe-
cifications. An all-pole mains isolating device with 3 mm contact opening should be provided in the house wir-
ing system. Switches, plug and socket devices, circuit breakers and fusible cut-outs which are accessible after
installation and which have all-poles switching are permissible as isolating devices. Effective earthing and sep-
arately installed neutral and earth conductors ensure safe and fault-free operation. After installation, live parts
and cables with basic insulation must not be accessible. Check old installations.
▸
The appliance is designed for use up to a max. altitude of 2000 m above sea level.
▸
Refer to the identification plate for information on the required mains voltage, current type and fuse protection.
The mains plug must not be cut off.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- V-ZUG
- Model
- WS60283
- Document type
- User Manual
- Category
- Warming Drawer
- Language(s)
- English
- Pages
- 7
- File size
- 965.8 KB
- Format
Summary
Installation requirements for warming, system, and vacuum drawers, emphasizing qualified personnel, electrical safety, low-voltage standards, proper connections, and fire protection when installing into combustible materials.
Instructions for mounting warming, system, and vacuum drawers using bracket sets 55 or 60 and appropriate screws, including diagrams for bracket installation and a table detailing model numbers, dimensions, and screw placement.
Guidelines for installing built-in solo drawers (warming, system, vacuum) specifying dimensions for Size System 55 and 60, and requirements for appliance clearance below ovens or coffee centers using bracket supports.
