Uniden BT109 - Manual
Uniden BT109 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Getting to Know the Headset; What the buttons do; The buttons activate the
- Page 3 – What the LED colors mean; Color; Setting Up Your Headset; Charge the battery; Before using your headset, charge the battery for at least 8 hours.
- Page 4 – Pair the headset to your Bluetooth phone; more than one phone, you need to pair it with each phone separately.
- Page 5 – Connecting to your phone
- Page 6 – Power; Using Your Headset; Put your headset on
- Page 8 – Available Features; After the headset is connected, you can use the following features:
- Page 9 – Muting the microphone; To mute the microphone so the caller can’t hear you, press and hold; Troubleshooting and Maintenance
- Page 10 – General Information
- Page 13 – Important Safety Instructions; Uniden America Corporation dOes NOT; SAVE THESE INSTRUCTIONS!
- Page 15 – important: evidence of original purchase is
BT108 and BT109
Bluetooth® Headsets
Also in this package:
2 extra ear cushions AC (indoor) power
adapter
DC (car) power adapter
(BT109 only)
Questions? Problems?
Get help on the web at www.uniden.com
or call our Customer Service line at 800-292-2294.
User’s
GUide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Getting to Know the Headset Using the headset at excessive volume can cause permanent hearing loss. To reduce the risk of hearing damage, use the minimum volume level necessary (see page 12). What the buttons do The buttons activate the function after you release them. Button Press it to Press and h...
What the LED colors mean Color State Meaning Red Steady The headset is currently charging. When the battery is fully charged, the LED turns off. Flashing The battery is low. Blue Flashing The headset is turned on. Slow flash (every 3 seconds) The headset is paired to a Bluetooth device. Red & bl...
Charging the BT108 Charging the BT109 Connect the adapter to the power connector on the top of the headset, then plug it into a standard 120 volt AC (regular indoor) power outlet. Connect either adapter to the power connector on the top of the headset. Connect the AC adapter to a standard 120 volt A...