Uniden BT-1007 - Manual
Uniden BT-1007 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Charge the handset completely (about 15 hours) before using it.; Connecting the Telephone Cord; Test the connection; Changing from Tone to Pulse Dialing; Base
- Page 3 – USING YOUR PHONE; Follow these steps...; When you assign a memory dial entry to a number key, the phone; Dialing a memory dial entry; If you press a number key with no assigned memory dial entry, the; Erasing a memory dial entry; IMPORTANT INFORMATION
- Page 4 – Weak or Hard To Hear Audio; Installing a line filter or DSL filter; light flashes during a; Liquid Damage; Handset; CAUTION! DO NOT use a microwave oven to speed up the drying
- Page 5 – AC Adapter and Battery Information; Rechargeable Nickel-Cadmium battery warning; Compliance Information; FCC Part 68 Information
- Page 6 – FCC RF Exposure Information; One-Year Limited Warranty
Battery
cover
Rechargeable
battery pack
(BT-1007)
What's in the box?
AC adapter (PS-0035) Telephone cord
DECT1340 base
and cordless
handset
x
If any items are missing or damaged, contact our Customer Care Line
immediately. Never use damaged products!
x
Need help? Get answers 24/7 at our website:
www.uniden.com
.
If You...
Contact Uniden’s...
Phone Number
have a question or problem Customer Care Line*
817-858-2929 or
800-297-1023
need a replacement part or
an accessory
Parts Department*
800-554-3988
need special assistance due
to a disability
Accessibility Help Line 800-874-9314
(voice or TTY)
* During regular business hours, Central Standard Time; see our website for detailed busi-
ness hours.
DECT1340 Series User's Guide
Important Safety Instructions!
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to
persons, including the following:
x
This unit is NOT waterproof.
DO NOT expose this unit to rain or moisture.
x
Do not use this product near water, for example, near a bath tub, wash bowl,
kitchen sink or laundry tub, in a wet basement or near a swimming pool.
x
Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
x
Do not use the telephone to report a gas leak in the vicinity of the leak.
x
Use only the power cord and batteries indicated in this manual. Do not
dispose of batteries in a fire. They may explode. Check with local codes for
possible special disposal instructions.
x
Do not place the handset in any charging cradle without the battery installed
and the battery cover securely in place.
SAVE THESE INSTRUCTIONS!
CAUTION! Risk of explosion if battery is replaced by an incorrect type!
Dispose of used batteries according to the instructions. Do not open
or mutilate the battery. Disconnect the battery before shipping this
product.
For more details, see the
Important Information
section.
GETTING STARTED
Charging the Battery
1. Unpack the handset, battery pack, and
battery cover. If you need to remove the
battery cover, press in on the notch and
slide the cover down and off.
2. Line up the battery connector with the jack
inside the handset. (The battery connector
will only fit one way.)
3. Push the connector in until it clicks into place; tug gently on the wires to
make sure the battery pack is securely connected.
4. Replace the battery cover and slide it into place.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
5. Connect the AC adapter to the power jack on the base. Route the cord through the notch. 6. Plug the other end of the adapter into a standard 120V AC outlet.7. Place the handset in the base with the keypad facing forward. The Talk/baTT low light on the handset should light up; if it doesn’t, resea...
USING YOUR PHONE Basics To... Follow these steps… make a call Press Talk and then dial the number. answer a call Press Talk . hang up Press End or put the handset in the cradle. redial a number Press Talk and then press rEdial . mute the microphone during a call Press MUTE . Press again to turn the ...
If… Try… I can’t make or receive calls. - Moving the handset closer to the base. - Making sure the base is plugged in. - Checking the telephone cord connection. - Disconnecting the base AC adapter. Wait a few minutes, then reconnect it. The handset won’t ring. - Charging the battery for 15-20 hours....
