Ultra Start 80 Series - Manual
Ultra Start 80 Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 9 – ARM SYSTEM / LOCK DOORS
- Page 15 – To Cancel Timer Mode
- Page 16 – SHOCK SENSOR ADJUSTMENTS; CHIRPS; Press & HOLD Lock + Unlock buttons at the same time; - ENTER SHOCK SENSOR ADJUSTMENT MODE
- Page 18 – UNLOCK BUTTON; START BUTTON; STATUS UPDATE BUTTON; after the button is pressed. The
- Page 20 – REMOTE PROGRAMMABLE FEATURES; or press the; star button to turn it ON
- Page 21 – To set the time on LCD 2way models, p; minutes; button the Pager Icon will start to flash.
- Page 22 – ALARM STATUS / DIAGNOSTICS; TROUBLE SHOOTING; the LED's do not turn on during the 35 second learn procedure.; When I unlock the doors the windows roll down or the Trunk Pops?
- Page 23 – WARRANTY
- Page 24 – IMPORTANT NOTES
REV.2007.11.13A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Timer Mode will start the vehicle at a user selectable start interval. The vehicle can be set to start once every 2, 3 or 4 hours , for a maximum of 12 starts. The vehicle will start at the selected start interval and run for the programmed runtime *. EXAMPLE: If the 4 hour start cycle was selected,...
SHOCK SENSOR ADJUSTMENTS 3 CHIRPS Press & HOLD Lock + Unlock buttons at the same time Press & HOLD Lock + Unlock buttons at the same time (NOTE: Shock Sensor Adjustment Mode has an auto time out of 8 seconds) Each time the lock button is pressed and released the sensitivity will be INCREASED...