Tripp Lite OmniPro500 - Manual
Tripp Lite OmniPro500 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety
- Page 3 – Quick Installation
- Page 4 – Basic Operation; Switches
- Page 6 – Specifications; Storage
- Page 7 – OMNIPRO
- Page 8 – Advertencias Sobre la Ubicación del Sistema UPS; Advertencias Sobre la Conexión del Sistema UPS; Advertencias Sobre la Conexión de Equipos; Seguridad
- Page 9 – Instalación Inmediata
- Page 10 – Operación Básica; Interruptores
- Page 12 – Específicaciones Técnicas; Almacenamiento; Almacenamiento y Servicio
1
Copyright ©2000 Tripp Lite. All rights reserved. OmniPro
™
is a trademark of Tripp Lite.
1111 W. 35th Street
Chicago, IL 60609 USA
Customer Support: (773) 869-1234
www.tripplite.com
Owner's Manual
OMNIPRO
™
500
Line-Interactive UPS System (120V)
ESPAÑOL: p. 7
Quick Installation:
p. 3
Basic Operation:
p. 4 - 5
Storage & Service:
p. 6
Specifications:
p. 7
Safety:
p. 2
Warranty & Insurance: p. 6
[REV: M]
200003008 OmniPro 500 Owner's Manual.p65
3/30/00, 2:39 PM
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 This manual contains important instructions and warnings that should befollowed during the installation, operation and storage of all Tripp Lite UPSSystems. UPS Location Warnings • Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight. • For best performance, keep th...
3 Quick Installation Plug your UPS into anelectrical outlet. Plug essential equip-ment such as yourcomputer, monitor andmodem into battery-supported outlets. Plug other equipmentinto surge-only outlets.* *Separate battery-supported/surge and surge-only outlets are identified on the back of yourUPS. ...
4 Basic Operation OFF ON Switches With your UPS plugged in, set this switch according to therecommendations in Step 3 of the Quick Installation section. "ON" Position Function: ENABLES battery backup. UPS Conditions: The UPS battery is charging. Power is ON at the UPS receptacles. The " ...
