Tricity Bendix BDW 60 - Manual

5 To select a different level ensure that thedishwasher is off and then proceed asfollows: 1. Press RINSE & HOLD and INTENSIVE programme push buttons simultaneously. 2. While keeping the programme push buttons RINSE & HOLD and INTENSIVE pressed switch on the dishwasher by pressing the MAINS ...

6 Rinse aid Rinse aid is automatically added during the last rinse, ensuringthorough rinsing, and spot and streak free drying. Thedispenser, which is positioned inside the door, holds about 110ml of rinse aid, which is sufficient for 16 - 40 dishwashingprogrammes, depending upon the dosage setting. ...

7 Loading your appliance Before placing dishes in the machine, remove any scraps offood, to avoid clogging the filters and consequently reducingthe performance. Do not load very small items which can fall through thebaskets. Open the door and slide out the baskets to load the dishes. The lower baske...

9 * Testing programme for EN 50242 (see "Hints for Test Centres).This programme, developed for the use of detergents with enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65°C programmes and conventional d...

10 1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. Press the MAINS ON push button The MAINS ON indicator light will come on. 3. Check that there is rinse aid and salt The salt indicator light will illuminate if refilling is necessary. 4...

11 Internal cleaning Ensure that the seals around the door, the detergent and rinseaid dispensers are cleaned regularly with a damp cloth.We recommend the use of Finish Dishwasher Cleaner every 3months or run a 65°C wash without dishes using detergent.Regular use of Finish Dishwasher Cleaner cleans ...

Symptom Fault code Solution The machine will not start ● The door has not been properly closed. ● The plug is not properly inserted in the power socket. ● There is a power failure. The machine does not fill "WASH" ● Ensure the water tap is open. with water phase indicator light ● Ensure the ...

13 If after all these checks, the problem persists, contact yourlocal Service Force Centre, quoting the model and serialnumber. This information can befound on the rating platelocated on the right handside of the dishwasher door(see picture). Service and Spare Parts In the event of your appliance re...

14 Standard guarantee conditions We, Bendix, undertake that if within 12 months of the date ofpurchase this Bendix appliance or any part thereof is proved tobe defective by reason only of faulty workmanship or materials,we will, at our option repair or replace the same FREE OFCHARGE for labour, mate...

15 Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser. Hints for test centres Test standard EN 50242 Reference programme: 50° BIO WASH Load: 12 standard place settings Rinse aid selector: position 5 Detergent dosage : 1...

16 Any electrical work required to install this applianceshould be carried out by a qualified electrician orcompetent person. Any plumbing work required to install this applianceshould be carried out by a qualified plumber or competentperson. Remove all packaging before positioning the machine. If p...

17 Electrical connection This appliance must be earthed.The manufacturer declines any responsibility should thissafety measure not be observed. If the plug that is fitted to your appliance is not suitable for thesocket, it must be cut off and the appropriate plug fitted. ImportantThe wires on the ma...