Tricity Bendix BDW 60 - Manuals

Page 2 - Contents; Technical specifications

2 Important safety information 3 Description of the appliance 3 The control panel 4 Before use 5 Setting the water softener 5 Rinse aid 6 Use of detergent 7 Using your appliance 8 Loading your appliance 8 Adjusting the height of the upper basket 8 Hints and tips 9 Washing programmes 10 Operating seq...

Page 3 - Important safety information

3 It is most important that this instruction book should be retained with the appliance for future reference. Should theappliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure thatthe book is left with the appliance in order that the new own...

Page 4 - Setting the water softener; Before use; MAINS ON indicator light; Phase indicator lights; The control panel

Before using your dishwasher for thefirst time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5. Fill...

Page 5 - Filling with salt

5 To select a different level ensure that thedishwasher is off and then proceed asfollows: 1. Press RINSE & HOLD and INTENSIVE programme push buttons simultaneously. 2. While keeping the programme push buttons RINSE & HOLD and INTENSIVE pressed switch on the dishwasher by pressing the MAINS ...

Page 6 - Use of detergent; If using powder detergents proceed as follows:; Compact detergents with enzymes

6 Rinse aid Rinse aid is automatically added during the last rinse, ensuringthorough rinsing, and spot and streak free drying. Thedispenser, which is positioned inside the door, holds about 110ml of rinse aid, which is sufficient for 16 - 40 dishwashingprogrammes, depending upon the dosage setting. ...

Page 7 - Removable knife basket; The upper basket; Using your appliance

7 Loading your appliance Before placing dishes in the machine, remove any scraps offood, to avoid clogging the filters and consequently reducingthe performance. Do not load very small items which can fall through thebaskets. Open the door and slide out the baskets to load the dishes. The lower baske...

Page 9 - Washing programmes

9 * Testing programme for EN 50242 (see "Hints for Test Centres).This programme, developed for the use of detergents with enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65°C programmes and conventional d...

Page 10 - Operating sequence

10 1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. Press the MAINS ON push button The MAINS ON indicator light will come on. 3. Check that there is rinse aid and salt The salt indicator light will illuminate if refilling is necessary. 4...

Page 11 - Maintenance and cleaning

11 Internal cleaning Ensure that the seals around the door, the detergent and rinseaid dispensers are cleaned regularly with a damp cloth.We recommend the use of Finish Dishwasher Cleaner every 3months or run a 65°C wash without dishes using detergent.Regular use of Finish Dishwasher Cleaner cleans ...

Page 12 - Something not working

Symptom Fault code Solution The machine will not start ● The door has not been properly closed. ● The plug is not properly inserted in the power socket. ● There is a power failure. The machine does not fill "WASH" ● Ensure the water tap is open. with water phase indicator light ● Ensure the ...

Page 13 - Service and Spare Parts

13 If after all these checks, the problem persists, contact yourlocal Service Force Centre, quoting the model and serialnumber. This information can befound on the rating platelocated on the right handside of the dishwasher door(see picture). Service and Spare Parts In the event of your appliance re...

Page 14 - Guarantee Conditions

14 Standard guarantee conditions We, Bendix, undertake that if within 12 months of the date ofpurchase this Bendix appliance or any part thereof is proved tobe defective by reason only of faulty workmanship or materials,we will, at our option repair or replace the same FREE OFCHARGE for labour, mate...

Page 15 - Hints for test centres

15 Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser. Hints for test centres Test standard EN 50242 Reference programme: 50° BIO WASH Load: 12 standard place settings Rinse aid selector: position 5 Detergent dosage : 1...

Page 16 - Water supply connections; Water outlet hose connection; Installation instructions

16 Any electrical work required to install this applianceshould be carried out by a qualified electrician orcompetent person. Any plumbing work required to install this applianceshould be carried out by a qualified plumber or competentperson. Remove all packaging before positioning the machine. If p...

Page 17 - Electrical connection; Fitting under a counter

17 Electrical connection This appliance must be earthed.The manufacturer declines any responsibility should thissafety measure not be observed. If the plug that is fitted to your appliance is not suitable for thesocket, it must be cut off and the appropriate plug fitted. ImportantThe wires on the ma...