TRENDNet Wireless N Gaming Adapter - Manual

Page 2 - Statement; Reorient or relocate the receiving antenna.

Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and ca...

Page 3 - firmware setting is not accessible by the end user.; European Union Notice:; of the European Community.; Trademark recognition

- 3 - firmware setting is not accessible by the end user. European Union Notice: Radio products with the CE marking comply with the R&TTE Directive (1999/5/EC), the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance...

Page 4 - Table of Contents

Table of Contents Table of Contents ...................................................................................................................................... 4 1. Getting Started with the TEW-647GA ........................................................................................

Page 7 - Features

2. Introduction The TEW-647GA Wireless N Gaming Adapter is an high-performance, supports high-speed wireless networking at home, at work or in public places. This bridge is also back compatible with 802.11g or 11b devices. This means that you do not need to change your entire network to maintain con...

Page 8 - Hardware Overview

Page 10 - Installation Considerations; ceilings is minimized.

3.3 Installation Considerations The TEW-647GA Gaming Adapter allows you to access your network by using a wireless connection from virtually anywhere within its operating range. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must p...

Page 11 - The Welcome screen appears on your monitor. Click; Setup Wizard; Read the License Agreement, accept the terms and click; Next; to continue the installation.

3.4 Getting Start 1. Insert Setup Wizard CD into your CD-ROM drive. 2. The Welcome screen appears on your monitor. Click Setup Wizard button. 3. Read the License Agreement, accept the terms and click Next to continue the installation. 11

Page 13 - information here. Click; Configure; to continue (default TEW-647GA IP Address is; Login

6. The search window will detect the connected TEW-647GA on our pc and display information here. Click Configure to continue (default TEW-647GA IP Address is 192.168.10.110). 7. Enter the password for TEW-647GA the click Login . The default password is “blank”. 13

Page 14 - Change; please go to step 14.; Push Button Method; to connect to your

8. To change new password, please enter the new password below then click Change . Note: To continue without changing the password, please click on the Skip button 9. There are 2 options to configure this adapter, WPS (Wi-Fi Protected Setup) or Manual Setup. To setup with WPS method, continue to ste...

Page 16 - settings with the; Save; or; Print

11. When the connection is made, it is recommended that you save or print your wireless settings with the Save or Print buttons. Click Apply to continue. 12. Disconnect the Ethernet cable from your PC to the destination game console. 16 13. Congratulations you have configured you TEW-647GA.

Page 17 - Manual Setup; , you can select to receive an IP address dynamically from the; to

14. When using Manual Setup , you can select to receive an IP address dynamically from the router or to use an fix IP address that matches your network segment on TEW-647GA. Once you made the selection, click Next to continue. To use static IP, please make sure it matches your wireless network. Clic...

Page 20 - with the

18. Confirm your new settings. It is recommended that you save or print your wireless settings with the Save or Print buttons. Once finished, click Apply to continue. 20 19. Disconnect the Ethernet cable from your PC to the destination game console.

Page 22 - Using the Configuration Menu; Open the Web browser.

4. Using the Configuration Menu Whenever you want to configure your TEW-647GA, you can access the Configuration Menu through your PC by opening the Web-browser and typing in the IP Address of the TEW-647GA. The TEW-647GA’s default IP Address is http://192.168.10.110 ¾ Open the Web browser. ¾ Type in...

Page 23 - The subnet mask of the local area network.; Default Gateway; The IP address of the router on the local area network.

4.1. Network 4.1.1 LAN Setting LAN Connection Type Choose "Static IP (fixed IP)" if your router does not support DHCP or if for any other reason you need to assign a fixed address to the AP. In this case, you must also configure the following fields. IP Address The IP address of this gaming ...

Page 27 - on the; Scan; the selected network to your profile by clicking the; Add Profile; button. To connect to the desire; Connect; button to join a wireless network from this site survey

4.2.2 Site Survey Use the Site Survey tool to search for wireless networks around the TEW-647GA adapter. Click on the Scan button to search for wireless network to join. From this window, you can also add the selected network to your profile by clicking the Add Profile button. To connect to the desi...

Page 31 - other wireless devices.

Using “Auto” option can increase throughput. However, it can also increase error rate in some installations, due to increased sensitivity to radio-frequency reflections. Select the option that works best for your installation. MCS Fix MCS rate for HT rate. (Auto, 0~32) The Modulation and Coding Sche...

Page 32 - priority given to the option in this section.

WMM Power Saving An option that allows wireless clients such as notebooks or Laptops to save battery life by sending less transmission during idle times. Add a check mark to enable this option. PS Mode Used for specific application when using WMM Power Saving mode is enabled, use this feature to hel...

Page 33 - WPS

4.2.6 WPS You can setup security easily by choosing PIN or PBC method to do Wi-Fi Protected Setup. PIN Start or PBC Start Enable the WPS feature. 33

Page 36 - then click; Apply; to upload the file into the adapter.

4.2.2 Upload Firmware By assigning firmware location, you can upload firmware at this page. Once you have a firmware saved on your computer, use this option to browse for the file and then click Apply to upload the file into the adapter. 36

Page 37 - importing the file, or reset them to factory default.

4.2.3 Setting Management You can save system settings by exporting them to a configuration file, restore them by importing the file, or reset them to factory default. 37

Page 40 - Glossary; Peer-to-Peer network between wireless clients

Glossary A Access Control List ACL. This is a database of network devices that are allowed to access resources on the network. Access Point AP. Device that allows wireless clients to connect to it and access the network Ad-hoc network Peer-to-Peer network between wireless clients Address Resolution ...

Page 57 - Specifications

Specifications Hardware Standards IEEE 802.11b, IEEE 802.11g and IEEE 802.11n (draft 2.0) LED Indicator WPS, WLAN, LAN, Power Power Consumption Standby mode: 160mA (max) ; Transmit mode : 210mA (max) Supported OS (for W izard) W ind...

Page 58 - Limited Warranty

Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TEW ‐ 647GA – 3 Years Warranty AC/DC...

TRENDNet Wireless N Gaming Adapter - Manual

Table of Contents:

Summary

Other TRENDNet Models