TRENDNet TV-IP110 - Manuals

Page 2 - Table of Contents

Table of Contents English ...................................................................................................... 1 1 4 3 9 1. Before You Start2. Hardware Installation .........................................................................3. Configure the Internet Camera ..............

Page 3 - System Requirements; Package Contents; Before You Start

System Requirements Package Contents 1. Before You Start English 1 ???? 1 x 2dBi Detachable Antenna ( ? AC Power Adapter (5V, 2.5A) TV-IP110/TV-IP110WUtility CD-ROMQuick Installation Guide TV-IP110W) ? ? ? ? ? ? 10/100Mbps Ethernet CPU: 1GHz processor or aboveMemory: 256MB RAM or above/ 512MB RAM or...

Page 4 - Application; Internet Camera Server; Wireless Internet Camera Server

Application English 2 Modem Internet Camera Server (TV-IP110) Cable/DSL 4-Port Broadband Router (TW100-S4W1CA) Notebook with PC Card (TE100-PCBUSR) Internet 10/100Mbps Wireless Internet Camera Server (TV-IP110W) Wireless G Firewall Router (TEW-432BRP) 54Mbps Modem Notebook with Wireless G PC Card (T...

Page 5 - Hardware Installation; Attach the; Antenna; and; Ethernet; port of the Internet

2. Hardware Installation English 3 1. Attach the Antenna . (TV-IP110W) 3. Connect the AC Power Adapter to the Internet Camera Server and then to a power outlet. 4. Verify the Power and Link LEDs are on. 2. Connect a RJ-45 network cable from a Switch/Router to the Ethernet port of the Internet Camera...

Page 6 - Configure the Internet Camera; Go to; Change IP; on the CD for more information.; IP; Follow the; Installation Wizard; instructions and then click; Close

English 4 3. Configure the Internet Camera 3. Go to Start -> Programs -> TRENDnet -> IPSetup and click IPSetup. 4. Select the Internet Camera and click Change IP . Note: 1. It is recommended that you configure the Internet Camera from a wired computer. 2. If you would like to use SecurView ...

Page 7 - Click

English 5 6. Click OK and wait 30 seconds. 5. Configure the IP address to be in the same subnet as your network, type in the Administrator ID and Password and click Change . By default:ID: admin Password: admin 7. Click OK. 8. Double click the IP Camera to access the browser configuration.

Page 9 - Verify the Power and Link LEDs; Site Survey; Pre-Shared Key and then click; Apply

English 7 15. Verify the Power and Link LEDs are on. 14. Disconnect the RJ-45 cable and unplug the power. Then plug the power back in (TV-IP110W). Note: The TV-IP110W will not work wirelessly until you disconnect the Ethernet cable from the back of the camera. 13. Click Site Survey . Select your wir...

Page 10 - Your installation is now complete.; Register Your Product

English 8 16. Click Live View. Note: For detailed information regarding the TV-IP110/ 110W configuration and advanced settings, please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's website at http://www.trendnet.com. TV-IP Your installation is now complete. ...

Page 11 - Troubleshooting

Q1: A1: Q2: A2: Q3: A3: Q4: A4: Q5: A5: Q6: A6: Q7: A7: The Image is blurry. How can I adjust the focus on the Internet camera? You can adjust the Internet Camera’s focus by rotating the lens. IP Setup is unable to detect my camera. What should I do? First, verify that you have followed all the step...

Page 12 - Certifications

Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received. Including interference that may cause undesired oper...

Page 13 - Product Warranty Registration; Please take a moment to register your product online.

Copyright ©2008. All Rights Reserved. TRENDnet. Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com/register 20675 Manhattan PlaceTorrance, CA 90501USA