TRENDNet TEW-511BRP - Manual

Page 2 - Table of Contents

Table of Contents English ................................................................................................................... 1 1 34 12 8 14 1. Prepare for Installation ...................................................................................2. Install Hardware ...............

Page 3 - Prepare for Installation; English QIG; English

Thank you for purchasing the TEW-511BRP. This Wireless AP/Router will allow you to securely share your Internet connection, files, and other resources with multiple users. This guide will help you set up and configure your AP/Router. Following the installation instructions should be quick and easy. ...

Page 5 - POWER; Verify Hardware Installation; Due to European Wireless Regulations, Super A Mode is not

3 2. Install Hardware 1. Connect one RJ-45 network cable from the Cable/DSL Modem's Ethernet port to the WAN port on the AP/Router. 2. Connect a different RJ-45 network cable from one of the AP/Router's LAN ports to your computer's network port. 3. Turn on your Cable/DSL modem. 4. Connect the includ...

Page 10 - Prepare for Installation

8 4. Configure your AP/Router English The following section will help you configure your AP/Router to connect to the Internet and your PCs. The setup differs and is dependent on the type of Internet connection you have. If you are not sure what type of connection you have, please contact your ISP to...

Page 11 - The “Internet Setup” page will appear.; In the; Optional Settings; Select; Automatic Configuration - DHCP; as the Connection Type.

9 English The “Internet Setup” page will appear. In the Optional Settings section, enter a host name and domain name (if required by your ISP). Then, select your Connection Type from the pull down menu, (Automatic Configuration - DHCP, Static IP, PPPoE, or PPTP) and proceed to the appropriate subset...

Page 12 - Static IP; Static IP Address; PPPoE

10 English Static IP 5. Select Static IP Address as the Connection Type. 6. Enter the IP address, subnet mask, default gateway, and domain name server (DNS) provided by your ISP. 7. Go to step 14. 10 PPPoE 8. Select PPPoE as the Connection Type. 9. Enter your username and password. 10. Go to step 14...

Page 13 - PPTP

11 English PPTP 11. Select PPTP as the Connection Type. 12. Enter the IP Address, Subnet Mask, Default Gateway, PPTP Server IP, username, and password provided by your ISP. 13. Go to step 14. 14. Scroll down to the Time Settings section, and select the appropriate Time Zone from the pull down menu. ...

Page 14 - Wireless Configuration; Click; Wireless; . The recommended settings will be automatically selected for; Apply

12 English 5. Wireless Configuration 1. Click Wireless . The recommended settings will be automatically selected for you. You may, however, choose to select a different channel and/or network name (SSID). 2. Click Apply (at the bottom of the page). NOTE: You must remember your “network name (SSID),”...

Page 15 - Configure your Wireless Network Adapter; Select the SSID that was assigned to TEW-511BRP. Click

13 English Configure your Wireless Network Adapter In this example, the TEW-501PC Super A+G Wireless Utility will connect to the TEW-511BRP. 1. Open the wireless utility that came with your network adapter and click AP List. 2. Select the SSID that was assigned to TEW-511BRP. Click Connect.

Page 16 - Test your Connection; Start

14 English 6. Test your Connection Windows 2000/XP 1. Click the Start button; click Run , type “cmd” in the text-field, and press the Enter key. 2. At the command prompt, type “ipconfig” and press the Enter key. 3. If the application displays an IP address of “192.168.1.x,” your computer is connecte...

Page 18 - Troubleshooting

16 For help with the TEW-511BRP's configuration and advanced settings, please refer to the User's Guide CD-ROM. Q1. A1. Q2. A2. Q3. A3. I specified the IP address “192.168.1.1” in my web browser, but an error message says "The page cannot be displayed." How can I get into the TEW-511BRP web ...

Page 19 - Federal Communication Commission Interference Statement; to which the receiver is connected.

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential inst...

Page 20 - Product Warranty Registration; Please take a moment to register your product online.; TRENDnet Technical Support; US/Canada Support Center; Contact

Copyright ©2005. All Rights Reserved. TRENDware International, Inc. @ TRENDnet TRENDware, USA What's Next in Networking Product Warranty Registration Please take a moment to register your product online. Go to TRENDware’s website at http://www.TRENDNET.com TRENDware International, Inc. 3135 Kashiwa ...

TRENDNet TEW-511BRP - Manual

Table of Contents:

Summary

Other TRENDNet Models