TRENDNet TV-IP100 - Manual

12 4 P HYSICAL D ESCRIPTION This section describes the externally visible features of the Internet Camera. Front Panel Power LED Link LED 13 Power LED The Power LED is positioned on the right side of the Internet Camera’s lens while facing the Internet Camera. A steady blue light confirms that the I...

14 Rear Panel Network Cable Connector The Internet Camera’s rear panel features an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling (which should be Category 5 twisted-pair cable). The port supports the Auto MDI-X type, allowing the Internet Camera to ...

16 Top Panel Screw Hole Located on the top panel of the Internet Camera, the screw hole is used to connect the camera stand onto the Internet Camera by attaching the screw head on the camera stand into the screw hole of the Internet Camera. Screw Hole 17 Bottom Panel Screw Hole Located on the bottom...

20 6 H ARDWARE I NSTALLATION This section describes the Hardware installation procedure for the Internet Camera. 1 Connect an Ethernet cable Connect an Ethernet cable to the network cable connector located on the Internet Camera’s rear panel, and then attach it to the network. 10 /10 0 Ethernet DC 5...

22 7 S ECURITY To ensure the highest security and prevent unauthorized usage of the Internet Camera the Administrator has the exclusive privilege to access the System Administration for settings and control requirements to allow users the level of entry and authorize the privileges for all users. Th...

24 number is the default IP address of your Internet Camera. Then, press [Enter] . Note: The PC’s IP address must correspond with the Internet Camera’s IP address in the same segment for the two devices to communicate. 25 Main Menu Image After the default IP address is entered from the browser, the ...

26 System Administration Click “System Administration” from the Welcome screen to access the settings required for the Internet Camera. There will be several options in the System menu bar to choose from to set your Internet Camera, including: z System z Image z Users z Date Time z Upload z E-mail z...

30 DNS IP Address: DNS (Domain Name System) server is an Internet service that translates domain names into IP addresses. Enter at least one DNS IP Address. Dynamic DNS: The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname in any of the domains, allowing your compute...

32 192.168.0.103 192.168.0.104 192.168.0.105 You can open the second port for each Internet Camera from port 81 to Port 85 as illustrated below: Internet Camera 1 – IP 192.168.0.101, second web port 81 Internet Camera 2 – IP 192.168.0.102, second web port 82 Internet Camera 3 – IP 192.168.0.103, sec...

34 Frame Rate: Select the frame rate desired with default setting at Auto for optimal frame rate. Brightness Control: Adjust the brightness level with default setting at 64. Contrast Control: Adjust the contrast level with default setting at 64. Saturation Control: Adjust the saturation with default...

36 Delete User: Select the user you wish to delete from the pull down menu and click the “delete” button. 192.168.0.20 Important Information Once the administrator has configured the Internet Camera Users , any user will be asked to enter a login password to access the video image from the Internet ...

38 Protocol: Two options of NTP or Time are available for your selection to link with the Time Server. The default setting is NTP. TimeZone: The system administrator must select the time zone for the region. Please refer to the appendix for the time zone selection table. To set the Date Time manuall...

42 System Administration – E-mail The E-mail menu contains the commands for E-mail account, time schedule and manual operation settings. Click “E-mail” in the system administration menu bar, and the setting screen will appear as below: Enter the relevant information, such as the SMPT Server Address,...

44 System Administration - Information The Information menu contains commands for displaying information about the Internet Camera. Click “Information” in the system administration menu bar and the Information screen will appear as illustrated below: The Information table provides detailed informati...

48 View Image – Java Mode Click “View Image – Java Mode” from the Welcome screen to access the video images from the Internet Explorer or Netscape browser as illustrated below: Camera Name* - The Camera name will be display when the Camera Name field is entered in the Web Configuration setting under...

50 9 I NTERNET C AMERA A PPLICAT ION The Internet Camera can be applied in wide variety of applications. With the built-in CPU, it can work as a standalone system that provides a web-based solution transmitting high quality video images and sounds for monitoring purposes. It can be managed remotely,...

52 Internet Camera Application Diagrams Home Applications SOHO Internet Camera SOHO Wireless Internet Camera 53 SOHO Applications SOHO

54 10 IPV IEW SE A PPLICAT ION Installation Insert the CD-ROM into the CD-ROM drive to initiate the auto-run program. Once completed, a menu screen will appear as below: 55 To install the IPView SE application click the "IPView SE" button to activate the installation procedure for the applic...

60 11 G ETTING S TARTED This section describes the operation of the IPView SE application with detailed procedures for using the application. IPView SE IPView SE is responsible for the management of preview, configuration, and searching of each camera. It is designed with a user-friendly interface f...

62 Minimize To minimize the control panel. Exit To close IPView SE. Play To play back the recorded file. Scan To display for each camera one by one. Combine To combine all display windows in one. About To display the information of IPView SE. 63 How to Add a Camera Add Camera To add a new camera, cl...

68 Camera Config Assign IP to Camera Connect / Disconnect Erase Extra Information Manual record Schedule record Motion record 69 How to Change Camera Assign IP of New Camera To change camera, click the “ Assign IP of Camera” button. An Assign IP of Camera dialog box will appear as illustrated below....

70 How to Connect / Disconnect the Image Connect the Image Click the “ Connect/Disconnect ” button and the preview screen will appear with the video image. Note: When a new camera is added, it IS connected. You can see the image right away. If you click the “Connect/ Disconnect” button, it will be i...

72 Disconnect the Image Click the “ Connect / Disconnect ” button, the camera will be disconnected. 73 How to Delete a Camera Erase Camera To delete a camera, you must select the camera to delete from the IPView SE control panel. Then, click the “ Erase Camera ” button. After deleting the camera, th...

74 Extra Information Extra Information The screen displays the camera’s information. Camera’s Extra Information 75 How to Adjust the Property Setting System Configure From the control panel, select the button and the dialog box will appear as shown below. Log Storage: 1. Single HDD Reserve Space Thi...

76 By File Size - permits recording by file size from 10 MB to 50 MB. 3. Storage List This option is used to define the path to save image files. The software will create a camera name folder as the “Storage List” which is allowed to create up to 16 File Path. Recycle: When you enabled this function...

78 Motion Setting You can adjust the sensitivity level and choose the Invoke Alarm options to work with motion detection function. Besides the Alarm Beep, Send Email can be enabled when motion detected. The user can define the time interval to Send E-mail. 79 Mail Server: Mail Server IP or name. Mai...

80 Update Firmware Enter the File Path and click the “Update” button, the firmware will be updated automatically. If you are unsure of the File path, you can click the “Browse” button, the Browse dialog box will appear as illustrated below. Warning During firmware update process, please make sure no...

82 A PPENDIX A Frequently Asked Questions Internet Camera Features Q: What is an Internet Camera? A: The Internet Camera is a standalone system connecting directly to an Ethernet or Fast Ethernet network and supported by the transmission based on the IEEE 802.11b standard. It is different from the c...

84 Q: Can the Internet Camera be installed and work if a firewall exists on the network? A: If a firewall exists on the network, port 80 is open for ordinary data communication. However, since the Internet Camera transmits image data, the default port 8481 is also required. Therefore, it is necessar...

86 C Trouble Shooting Q: I cannot access the Internet Camera from a web browser. A1: The possible cause might be the IP Address for the Internet Camera is already being used by another device. To correct the possible problem, you need to first disconnect the Internet Camera from the network. Then ru...

92 E Xplug Control Installation Installation To Web Server 1. Installation: Copy the “xplug.ocx” file to any WEB Server table. 2. Setting (Configuration): From the Web Configuration menu select “System” and under the “Loading ActiveX From” input web server location (http://www.web server location.co...

96 F Adjust Internet Camera Focus To adjust the focus of the lens, you need to turn the lens slowly in either clockwise or anti-clockwise direction until the desired image appears. DO NOT over turn the lens in either of the directions as it will be out of focus. Note : You can further adjust the Wir...

100 HGlossary of Terms NUMBERS 10BASE-T 10BASE-T is Ethernet over UTP Category III,IV, or V unshielded twisted-pair media. 100BASE-TX The two-pair twisted-media implementation of 100BASE-T is called 100BASE-TX . 802.11b An IEEE standard for wireless local area networks. It offers transmissions speed...

106 WAN – (wide area network): The computers are in different geographic locations and are connected by telephone lines or radio waves. NWay Protocol A network protocol that can automatically negotiate the highest possible transmission speed between two devices. P PING Packet Internet Groper, a util...