TRENDNet TS-I300W - Manual - manualsarea.com

Page 2 - Table of Contents

Table of Contents Table of Contents Version 07.06.2006 English ..................................................................................................... Troubleshooting ........................................................................................ 1 1 247 8 1. Before You Start2...

Page 3 - Package Contents; Before You Start

System Requirements Application Web Browser: Internet Explorer (5.5 or higher) A computer with a network adapter properly installed.A network Switch or Hub with an available network LAN port.A RJ-45 network cable. TS-I300/TS-I300W User's Guide CD-ROMQuick Installation GuideMounting StandAC Power Ada...

Page 4 - Hardware Installation; Make sure the jumper settings on

2. Hardware Installation English 2 1. Remove the two screws from the rear panel to detach the cover. 2. Make sure the jumper settings on the hard drive is set to Master. Note: Before installing the IDE hard drive, the jumper settings must be set to Master. 4. Place the hard drive onto the metal brac...

Page 5 - LAN; Your hardware installation is now complete.

English 3 6. Attach the mounting stand to the Storage Server. 7. Connect a RJ-45 cable from the Switch/Hub to the LAN port of the Storage Server and then connect the 2dBi Detachable Antenna(TS-I300W). 8. Connect the External Power Adapter to the Storage Server and then to a power outlet. 9. Verify t...

Page 6 - Configure the Storage Server; For Windows Users

English 4 2. Click on Search device , and then select the Storage Server. 3. Configure the IP (IP address) , Network ( Subnet mask) , Gateway and then click Modify . Note: The IP Address must match the network segment of your network. 3. Configure the Storage Server Note: Install and use the Easy Se...

Page 7 - Format Hard Drive; Click; OK; Click

English 5 5. Click Format Hard Drive . 6. Click OK . 7. Click Restart. 8. Click OK. Note: If your hard drive has already been formatted, please skip to step 9. If you are attaching a brand new hard drive, please continue on to step 5.

Page 8 - Your configuration is now complete.

English 6 9. Enter the User name and Password, and then click Config . User Name: admin Password: admin 10. Click Advanced and then Wireless. Note: For the TS-I300 skip to section 4. For the TS-I300W continue on to step 10. 11. Click Access Point , and then click Enable. Enter an SSID and then click...

Page 9 - Mount; Your storage device is ready for access

English 7 1. Select the hard drive, and then click Mount . 2. Click OK . 3. Double-click on My Computer . Then double-click on any mounted hard drive under Network Drives . 4. Accessing Storage Devices on TS-I300/TS-I300W Your storage device is ready for access

Page 10 - Troubleshooting

8 Q1: A1: Q2: A2: Can I connect or disconnect the USB storage device while the TS-I300/TS-I300W is on? Yes, you can connect or disconnect any external USB device while the computer is on, I specified the IP address http://192.168.1.2 in my Internet Browser's Address Bar, but an error message says “T...

Page 12 - US Canada; Worldwide

Copyright ©2006. All Rights Reserved. TRENDnet. 3135 Kashiwa StreetTorrance, CA 90505USA Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com TRENDnet Technical Suppor t US Canada 24/7 Tech Support Toll Free Telephone...

TRENDNet TS-I300W - Manual

Table of Contents:

Summary

Other TRENDNet Models