TRENDNet TEW-MP2U - Manual

1. Insert the Utility CD-ROM into your computer's CD-ROM Drive and then click Install Utility . 3. Configure the Print Server 2. Follow the InstallShield Wizard instructions. Then click Finish . 3. Click the Print Server and click Configure Server . 4. Enter the User name and Password, and then clic...

Print Server configuration is now complete. For detailed information regarding the TE100-MP1U/TE100-MP2U configuration and advanced settings, please refer to the User's Guide on the Utility CD-ROM or TRENDnet's website at www.trendnet.com 5. Click TCP/IP . Assign the Print Server a Static IP address...

English 7 5. Cllick Close . 7. Verify the WLAN LED is lit on the Print Server. 6. Unplug the power to the Print Server, disconnect the Ethernet cable to the Print Server, wait 15 seconds, then plug power to the Print Server back in. Print Server wireless configuration is now complete. For detailed i...

English 8 5. Printing Note: 1. For LPR, IPP and Manual connect printing instructions, please refer to the User Guide. The User Guide is included on the Utility CD-ROM. 2. A computer using LPR or IPP printing and a computer using NetUSB printing can not print documents to the same printer simultaneou...

English 9 5. Select the printer. Then click Disconnect . (optional) Note: For Auto Connect Printing, a user does not have to wait for the current owner to click disconnect. Follow step 1 to grab ownership of the Print Server. 4. User can now start printing.

English 10 6. Faxing 3. Select your fax as the printer. 1. Select the printer. Then click Connect . 2. Open the document that you wish to fax and click Print . 4. Your Multi-Function Printer's fax software will appear. Follow the fax software instructions for sending a fax. 5. Select the printer. Th...

English 12 8. Storage Selecting Mode 2. Click Supported Protocols , select Server Mode or NetUSB Mode and then click apply. 1. Select the Print Server and click Configure Server . Server Mode 3. Click Yes to restart the Print Server. 1. Click Network Storage . 2. Right click the USB storage icon and...

English 13 3. Select the desired drive letter and then click Finish . NetUSB Mode Note: Only one user can connect to the storage device at a time in NetUSB mode. 1. Click Connect. 2. Select Open folder to view files using Windows Explorer and then click OK . 3. Click Disconnect to disconnect from th...

Q1. A1. Q2. A2. Q3. A3. Q4. A4. Q5. A5. The Multi-Function Print (MFP) Server Control Center does not detect the Print Server and/or printer/storage device. What should I do? First, double check your hardware connections; make sure that the Print Server and printer are powered ON and are properly co...

Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received. Including interference that may cause undesired oper...

TRENDnet Technical Suppor t Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com US Canada 24/7 Tech Support Toll Free Telephone: 1(866) 845-3673 Europe (Germany France Italy Spain Switzerland UK) English/Espanol - 24...