Page 2 - Federal Communication Commission Interference Statement; Reorient or relocate the receiving antenna.
2 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential in...
Page 3 - Europe – EU Declaration of Conformity; Safety of Information Technology Equipment
3 Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: - EN60950-...
Page 5 - Contents
5 Contents Package Contents .................................................................................................................... 6 Minimum System Requirements ............................................................................................... 6 Introduction .................
Page 6 - Multi-Language Quick Installation Guide; Minimum System Requirements; A router with an available network LAN port.
6 Package Contents TEW-637AP Multi-Language Quick Installation Guide CD-ROM (Setup Wizard and User’s Guide) 1 x network cable(0.6 m/ 2 ft.) Power adapter (12vDC 0.5A) Using a power supply with a different voltage than the one included with your product will cause damage and void the warran...
Page 7 - Introduction; F E A T U R E S
7 Introduction The 300Mbps Wireless Easy-N-UpgraderTM upgrades your old, perfectly functioning router, to high speed wireless n. Enjoy up to 12 times the speed and 6 times the coverage of a wireless g network Eliminate wireless dead spots, seamlessly surf the Internet and help the environment by not...
Page 8 - H A R D W A R E O V E R V I E W; Front View; WLAN LED; Press the button to enable WPS function.
8 H A R D W A R E O V E R V I E W Front View WLAN LED A solid light indicates that the wireless segment is ready. This LED blinks green during wireless data transmission. WPS LED This LED blinks green during WPS function is enabled. LAN LED A solid light indicates a connection to a Router on the LAN...
Page 9 - Rear View; Reset Button; ressing the reset button
9 Rear View Auto MDI/MDIX 10/100Mbps LAN Ports This port automatically senses the cable type when connecting to Router. Reset Button ressing the reset button restores the AP to its original factory default settings. Power Switch (EU version) On/off Switch DC-IN The DC power input connector is a sing...
Page 10 - I N S T A L L A T I O N C O N S I D E R A T I O N S; radios and baby monitors.
Page 10 I N S T A L L A T I O N C O N S I D E R A T I O N S There are a number of factors that can impact the range of wireless devices. 1. Adjust your wireless devices so that the signal is traveling in a straight path, rather than at an angle. The more material the signal has to pass through the m...
Page 11 - Getting Started; Verify that the Power & Ethernet LEDs are lit.; Start; Read the License Agreement and click; Next; to continue the installation.; Next button
Page 11 Getting Started For a typical wireless setup at home or office, please do the following: 1. Connect one end of the provided network cable into your computer’s network port, and connect the other end of the provided network cable into the TEW-637AP’s Ethernet port. 2. Plug the power adapter t...
Page 12 - Configure
Page 12 8. Plug in the power adapter of the TEW-638APB and plug in the device that you will be connecting together. Verify the Power & Ethernet LEDs are light. EU Version please make sure the power switch is on the On position 9. Your computer will detect TEW-637AP and the Device List screen app...
Page 15 - select; None; and click
Page 15 18. Enter SSID of TEW-638APB, click Next button. 19. Choice Wireless Mode. 20. To disable Security Mode, select None and click Next button.
Page 17 - Save; or; Print; Congratulations you have configured you TEW-637AP.
Page 17 23. Confirm your new settings. It is recommended that you save or print your wireless settings with the Save or Print buttons. Once finished, click Configure to continue. 24. Save you setting to a text file in a desired location. 25. Congratulations you have configured you TEW-637AP.
Page 18 - Using the Configuration Menu; IP Address
Page 18 Using the Configuration Menu Whenever you want to configure your TEW-637AP, you can access the Configuration Menu by opening the Web-browser and typing in the IP Address of the TEW-637AP. Open the Web browser. Type in the current IP Address of the AP (i.e. http://192.168.10.100 ). If you...
Page 19 - Network; N E T W O R K L A N S E T T I N G; LAN Connection Type
Page 19 Network The Network tab provides the following configuration options: LAN Setting. N E T W O R K L A N S E T T I N G These are the settings of the LAN (Local Area Network) interface for the Access Point. The Access Point's local network (LAN) settings are configured based on the IP Address a...
Page 20 - Wireless; W I R E L E S S B A S I C; Repeater Mode Support
Page 20 Wireless The wireless section is used to configure the wireless settings for your Access Point. Note that changes made in this section may also need to be duplicated on wireless clients that you want to connect to your wireless network. To protect your privacy, use the wireless security mode...
Page 23 - W I R E L E S S A D V A N C E D; Beacon Interval
Page 23 W I R E L E S S A D V A N C E D Beacon Interval Beacons are packets sent by a wireless Access Point to synchronize wireless devices. Specify a Beacon Period value between 20 and 1000. The default value is set to 100 milliseconds. Fragment Threshold This setting should remain at its default v...
Page 25 - M A C F I L T E R; Wireless MAC Filtering; Choose the type of MAC filtering needed.
Page 25 WLAN Partition When two clients link to this AP, they won't be able to communicate with each other if the WLAN Partition is enabled. STBC (Space Time Block Coding) A transmitter diversity technique of spreading the transmit signal over multiple antennas to improve reception. STBC also incorp...
Page 26 - Use this section to add MAC addresses to the list below.; S E C U R I T Y; SSID choice; Choose the SSID which need to implement security.; Security Mode
Page 26 When "Disable" is selected, MAC addresses are not used to control network access. Add MAC Filtering Rule Use this section to add MAC addresses to the list below. MAC Address Enter the MAC address of a computer that you want to control with MAC filtering. Computers that have obtained ...
Page 28 - WPA/WPA2 mixed environment
Page 28 WPA/WPA2-Personal This option uses Wi-Fi Protected Access with a Pre-Shared Key (PSK). Pre-Shared Key: The key is entered as a pass-phrase of up to 63 alphanumeric characters in ASCII (American Standard Code for Information Interchange) format at both ends of the wireless connection. It cann...
Page 29 - W P S; WPS mode; S T A T I O N L I S T; You can monitor stations which associated to this AP.
Page 29 W P S You can setup security easily by choosing PIN or PBC method to do Wi-Fi Protected Setup. WPS mode Two WPS modes can be selected – PIN & PBC. If PIN is selected, you should enter PIN code of your wireless client device to get wireless connection with this AP. S T A T I O N L I S T Y...
Page 30 - Administrator; S Y S T E M M A N A G E M E N T
Page 30 Administrator This Administrator section is used to set password for access to the Web-based management, also provide function of firmware upgrade. The Administrator tab provides the following configuration options: Management, Upload Firmware, Settings Management & Status. S Y S T E M M...
Page 32 - Glossary
Page 32 Glossary A Access Control List ACL. This is a database of network devices that are allowed to access resources on the network. Access Point AP. Device that allows wireless clients to connect to it and access the network Ad-hoc network Peer-to-Peer network between wireless clients Address Res...
Page 40 - Specifications
Page 40 Specifications Hardware Standards IEEE 802.11n, IEEE 802.11b, IEEE 802.11g, 802.3u and 802.3 Interface 1 x 10/100Mbps Auto-MDIX LAN port CD Wizard OS Compatibility Windows 7 (32/64-bit), Vista(32/64-bit), XP(32/64-bit), and 2000 LED Indicators Power, LAN, W PS, and W ireless Power Supply 12 ...
Page 41 - TEW-637AP – 3 Years Warranty; WARRANTIES EXCLUSIVE; : IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED
Page 41 Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TEW-637AP – 3 Years Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty. If a ...
