TRENDNet TEW-630APB - Manual

TRENDNet TEW-630APB

TRENDNet TEW-630APB – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
Page: / 11

Table of Contents:

  • Page 2 – Table of Contents
  • Page 3 – Package Contents; Before You Start; A computer with a network adapter properly installed
  • Page 4 – Install Hardware; Connect a RJ-45 cable from the; LAN; port of the; WLAN
  • Page 5 – Configure the Access Point; Log in; Open your web browser, type; Enter; Launch Wireless Setup; Click; Next
  • Page 6 – The example below is for WPA security. If you select Best (WPA2) or
  • Page 7 – Take note of the Pre-Shared Key; Save; Your installation is now complete.; Register Your Product
  • Page 8 – Troubleshooting
  • Page 9 – I can not connect to my network using wireless computers.; If you have a DHCP server in your network, you need to go into TCP/IP
  • Page 10 – Certifications
  • Page 11 – US Canada; Worldwide
Loading the manual

TEW-630APB

Quick Installation Guide

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Table of Contents

Table of Contents English ...................................................................................................... Troubleshooting ........................................................................................ 1 1 23 6 1. Before You Start2. Install Hardware .....................

Page 3 - Package Contents; Before You Start; A computer with a network adapter properly installed

Installation Requirements Application Package Contents 1. Before You Start English 1 HD DATA 300Mbps, share multimedia throughout the house 300Mbps Wireless N Access Point (TEW-630APB) ?? A computer with a network adapter properly installed ? A network Switch or Hub with an available network LAN por...

Page 4 - Install Hardware; Connect a RJ-45 cable from the; LAN; port of the; WLAN

2. Install Hardware English 2 2. Connect the AC Power Adapter to the Access Point and then to a power outlet. Note: Locate an optimum location for the Access Point. The best place for the Access Point is usually at the center of your wireless network. Please connect the computer configuring the TEW-...

Other TRENDNet Models

All TRENDNet Other