TRENDNet TEW-610APB - Manual
TRENDNet TEW-610APB – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Table of Contents
- Page 3 – Prepare for Installation; English QIG; English
- Page 4 – Verify Hardware Installation; If you are using a wired computer to configure the Access Point,
- Page 6 – Click on; Use the following IP address; for IP address; OK; Click
- Page 7 – Configure the Access Point; From a Wired Computer
- Page 8 – Site Survey; , and select the desired access point. Click; Connect; Please verify your connection status.; Congratulations! Installation is now complete.
- Page 9 – Troubleshooting; I cannot connecting to my network using wireless computers.; If you have a DHCP server in your network, you need to go into TCP/IP; Certifications
- Page 10 – Product Warranty Registration; Please take a moment to register your product online.; TRENDnet Technical Support; US/Canada Support Center; Contact
Copyright ©200 .
TRENDware International, Inc.
5 All Rights Reserved.
TRENDnet
TRENDware, USA
What's Next in Networking
TEW-610APB
Version 8.19.2005
Quick Installation Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Table of Contents English ...................................................................................................... Troubleshooting........................................................................................... 1 1 2356 7 1. Prepare for Installation ............................
Thank you for purchasing TRENDnet's TEW-610APB 108Mbps 802.11g MIMO Wireless Access Point. This guide will help you set-up your Access Point quickly and easily. Just follow the step-by-step instructions below, and enjoy the benefits of accessing the Internet/network without ever being tied down to w...
2 1. Locate an optimum location for the Access Point. The best place for the Access Point is usually at the center of your wireless network. 2. Connect the RJ-45 network cable to the Access Point, then connect the other end of the network cable to a Switch or Hub. The Access Point is nowconnected to...
