Page 6 - NTRODUCTION; a user-friendly program that allows you to
1 I NTRODUCTION Congratulations on purchasing your 10/100Mbps Parallel Print Server, the easiest and fastest way to deploy printers on your network. This compact print server can connect your network through a switch or hub between PC/Notebook and print server anywhere you wish to locate printer ser...
Page 7 - Package Contents; One Multiple-Language Quick Installation Guide.; System Requirements; For Web Configuration:
Package Contents Unpack the package and check all the items carefully, and inspect that you have the following: One TE100-P1P One AC Power Adapter suitable for your country’s electric power service. One Multiple-Language Quick Installation Guide. One Installation CD-ROM containing the PS-Uti...
Page 8 - General Features
General Features Compliant with Bi-directional 36-pin parallel port Equipped 10/100 auto-MDIX Fast Ethernet LAN port Multi protocol support is ideal for shared printing in mixed-LAN environments Windows-based program makes it possible to set up in a few minutes. Offer LPR program for Windo...
Page 9 - Product View
Product View This section describes the externally visible features of the print server. Front View Rear View Power Connector – plug the AC Power Adapter to this jack. LAN Connector – plug your LAN cable to this connector. LEDs Parallel Printer Port connect the print server to a Printer Port
Page 10 - * There are three green LED indicators on the rear panel:; LEDs
* There are three green LED indicators on the rear panel: LEDs Description Power Steady light confirms that the Print Server is powered on. LPT When it is blinking, the printer connected is printing. Link/Act Steady light confirms that the print server has a good connection to your network. When it ...
Page 11 - Networking Application
2 H ARDWARE I NSTALLATION Networking Application The following diagram explains the application of your print server. Network Print Server Solution
Page 12 - Installing the Print Server; Confirm that your network is operating normally.
Installing the Print Server Follow these steps for a trouble-free start of print server operations with your pocket-sized Print Server. 1. Confirm proper operation of the printer to be connected to the print server. 2. When you have confirmed proper operation of the printer, turn off the power. 3. C...
Page 13 - Utility; is designed with a user-friendly interface that allows you to set; Auto-Run Installation; PS Wizard; – click to setup printer port connectivity
3 U SING T HE U TILITIES This chapter describes the software utilities for the print server, including how to set up your print server with these utility. The PS- Utility is designed with a user-friendly interface that allows you to set up and administer the print server easily. Auto-Run Installatio...
Page 15 - Installing PS-Utility; Install Utility; Click
PS-Utility To avoid the conflict in your network, you can use PS-Utility to change the related settings of your print server (such as the IP address) after finishing the installation. Installing PS-Utility 1. Insert CD-ROM into CD-ROM drive. Click Install Utility > PS Utility. 2. Click Next > ...
Page 17 - Start; , and then click the
1. Click Start Programs TRENDnet , and then click the PS-Utility item. 2. The main screen will appear as below, and it starts to search the connected print server within the network. Component Features: 1. Device List: Display the connected print server within the network. Your print server
Page 18 - Control Buttons; Manually
2. Control Buttons - Setup Wizard: Click this button to setup the configuration - Update Firmware: Click this button to update the firmware of the selected print server. - Factory Reset: Click this button to reload the factory settings of the print server. - Change IP Address: Click this button to b...
Page 21 - Next
2) Select the print server, select the desired port and then click Add Printer. 3) Click Select from manufacturer list. Select the appropriate driver for your printer and then click Next .
Page 22 - Print Test Page; OK
4) Click Next . 5) Click Print Test Page . 6) Click OK .
Page 23 - Finish; and then click
7) Click Finish . 8) Repeat steps 1 to 7 to add the printer to other computers on the network. Windows 98SE/ME 1. Insert the Installation CD-ROM into your computer’s CD-ROM drive. Click PS Wizard and then click 98SE/ME from the Auto- Run menu screen. The welcome screen appears below. Click Next >...
Page 24 - Select the printer port in the Print Server List, and click
NOTE: For some specific printers, you may need to connect the printer to the computer and install the driver. In this case, connect it to the computer and install the driver first, and then connect it to the print server. 2. In the following window, select one printer in the Printer List to set up p...
Page 27 - Web Configuration Utility
4 W EB C ONFIGURATION You can access and manage the Print Server through: 1) the enclosed software PS-Utility, and 2) a web browser. This chapter describes the second method – the Web Configuration Utility, and explains how to set up your print server with the web browser. Web Configuration Utility ...
Page 28 - Home; System; displays the status of your print server and
Home The M anagement Screen of the Configuration Utility The Home screen displays the basic information of the print server. As shown above, the System displays the status of your print server and network. Clicking Refresh will update the information.
Page 29 - Setup Wizard
Setup Wizard The “Setup Wizard” will hlep you to change all the configurations step by step. Please follow below steps to finish it System In this field, you can configure the basic information of your print server.
Page 30 - IP Address; Manually Assign
Server Name: Assign a name to the print server. The default server name is set to PS (the prefix of print server) following by the last 6 digits of the Mac address. Port Name: Assign the Port Name for the print server Password: Enter the Administrator password (3-8 characters). IP Address This optio...
Page 32 - Save to Print Server
Save to Print Server Please double check all the configurations and click “Yes” to save the settings. The Setup Wizard has been completed.
Page 33 - Change IP Address
Change IP Address This feature is helping you to change IP address only. If you have run the Setup Wizard already, you may skip this procedure. Please type in IP address that applies to your existing network (i.e. 192.168.X.X) Type in the Default Gateway (i.e. your router’s local IP address).
Page 34 - Printer Information; Printer Information”; will display all printer information such as
Printer Information “ Printer Information” will display all printer information such as Manufacturer, Model Number, Command Set and Status.
Page 35 - Factory Reset; Please click
Factory Reset Please click Yes to restore the factory default setting.
Page 36 - Firmware Upgrade; Browse
Firmware Upgrade The firmware can be easily upgrade through “Firmware Upgrade” feature. Click Browse to get the firmware file, and then click Upgrade to flash firmware. The new firmware can be downloading from www.trendnet.com once it is available.
Page 37 - About; This screen displays the information of the print server.
About This screen displays the information of the print server.
Page 38 - systems are capable; systems, or if you want to print from workstations that are
5 P R I N T I N G I N W I N D OW S 98SE/ME The Print Server can provide print services to TCP/IP networks using the lpr/lpd network printing protocol. Most U NIX systems are capable of supporting lpd, as is Windows 2000. This LPR for TCP/IP Printing client gives Windows 95/98/Me workstations the abi...
Page 40 - Select the LPR for TCP/IP Printing client and click; to let Windows restart.
7. Insert the Print Server installation CD in your computer’s CD-ROM, enter the proper pathname (for example , D:\ lpr), and click OK . 8. Select the LPR for TCP/IP Printing client and click OK . 9. Windows will copy the necessary files, and return to the Network dialog. Click OK to let Windows rest...
Page 41 - Adding LPR Printer Ports; From the; item within it. Windows will display the; Network; icon in the Control Panel folder.; Properties
Adding LPR Printer Ports Once you have installed the client, and have enabled TCP/IP printing for the Print Servers, then you need to add a printer port for each printer you will be printing to using the lpr/lpd protocol. To add a printer port, 1. From the Start menu, choose the Settings submenu, th...
Page 43 - Printing from Windows 98SE/ME; Network Printer
Printing from Windows 98SE/ME After you have added the necessary printer ports, you can add a printer device for printing to the port. To enable printing to an lpr-accessible printer port from Windows 98E/ME, please do the following. 1. From the Start menu, choose the Settings submenu, then the Prin...
Page 45 - Press; when you have located the proper printer port.
Press OK when you have located the proper printer port. Click Next > to continue to the next step. 5. At this point Windows will ask you to choose the correct printer driver for the printer. Choose you printer’s make and model from the list, or use the driver disk included with the printer. When ...
Page 46 - Setting TCP/IP Printing Settings
Setting TCP/IP Printing Settings The lpr client’s Properties dialog allows you to change several of the client’s settings. To change these settings, 1. From the Start menu, choose the Settings submenu, then the Control Panel item within it. Windows will display the Control Panel folder. 2. Double-cl...
Page 48 - Printers; Add a Printer; Click “; Add a local printer
6 P R IN T IN G IN W IN D OWS 7/VISTA/XP/2000 Setting Up Windows 7/Vista TCP/IP Printing Following is the correct procedure for setting up TCP/IP LPR printing under Windows Vista. Click Start > Control Panel > Printers Click “ Add a Printer ” Click “ Add a local printer ”
Page 50 - Select; Create a new port; and then; You can get the Port name from the print server’s system
Select Create a new port , select Standard TCP/IP Port and then click Next . Input the IP Address of the Print Server, and the Port name of the Port that will be printed to, then click “ Next ”. Hint: You can get the Port name from the print server’s system information through web browser. Please re...
Page 52 - Manufacturer’s Driver Disk. Click “
Click “ Next ”. The Printer Install Wizard will now prompt for drivers. Select the correct Make and Model, or click “ Have Disk ”, to provide the Manufacturer’s Driver Disk. Click “ Next ”.
Page 53 - Printer Name; A Test Page can be printed to confirm proper configuration.
Select a “ Printer Name ”. A Test Page can be printed to confirm proper configuration.
Page 54 - Once a test page has been sent to your printer, click; Close; Setting Up Windows XP
Once a test page has been sent to your printer, click Close . Click Finish . Setting Up Windows XP TCP/IP Printing Following is the correct procedure for setting up TCP/IP LPR printing under Windows XP.
Page 55 - Printer and Faxes; Double Click “
Click Start > Printer and Faxes Double Click “ Add a Printer ” Click “ Next ”
Page 56 - Select “; Local Printer; Create a new “
Select “ Local Printer ” Create a new “ Standard TCP/IP Port ”
Page 60 - Select a “
The Printer Install Wizard will now prompt for drivers. Select the correct Make and Model, or click “ Have Disk ”, to provide the Manufacturer’s Driver Disk. Click “ Next ”. Select a “ Printer Name ”.
Page 62 - Setting Up Windows 2000 TCP/IP Printing; Add Printer
Setting Up Windows 2000 TCP/IP Printing Following is the correct procedure for setting up TCP/IP LPR printing under Windows 2000. Click Start > Settings > Printers . Double Click “ Add Printer ” Select “ Local Printer ”
Page 64 - You can get the Port name from the print server’s system; Custom
Input the IP Address of the Print Server, and the Port name of the Port that will be printed to, then click “ Next ”. Hint: You can get the Port name from the print server’s system information through web browser. Please refer page 21. Select “ Custom ”, and click “ Settings ”.
Page 65 - Select “; LPR; ”, and put the Port name in the field labeled “; Queue
Select “ LPR ”, and put the Port name in the field labeled “ Queue Name ”. Then Click “ OK ”. Click “ Next ”.
Page 66 - Manufacturer’s Driver Disk.
Click “ Finish ” The Printer Install Wizard will now prompt for drivers. Select the correct Brand and Model, or click “ Have Disk ”, to provide the Manufacturer’s Driver Disk.
Page 69 - When the Test Page has been printed, click “; ” to complete the
When the Test Page has been printed, click “ Finish ” to complete the installation.
Page 70 - RINTING IN; MAC; Mac OS printing is supported by Postscript printers only!; MAC 10.6 SNOW LEOPARD USER; System Preferences
7 P RINTING IN MAC OS NOTE: Mac OS printing is supported by Postscript printers only! Below instruction is for your reference only. The actually screenshots and port names will differ depending on the print serv er. Below is the port name for each print serv er: TE100-P1P/TEW -P1PG => PS-XXXXXX...
Page 73 - Bonjour-enabled Printers; Kind; Auto
Mac OS X Snow Leopard (10.6) supports fiv e printing protocols: 1. Bonjour 2. Internet Printing Protocol (IPP) 3. Line Printer Daemon (LPD) 4. HP Jetdirect – Socket To add an Internet Printing Protocol enabled, Line Printer Daemon enabled or HP Jet Direct – Socket enabled printer, click the button a...
Page 75 - Adding an IP Printer; Protocol
Adding an IP Printer To add an Internet Printing Protocol enabled, Line Printer Daemon enabled or HP Jet Direct – Socket enabled printer, click the button. Select the desired printing protocol from the Protocol drop- down menu.
Page 78 - Add; Print; For set up Socket Printing:; Address; queue
Click Add button after done the section of printer model in the Print Using drop-down menu. For set up Socket Printing: 1. Enter the IP address of the print serv er to which the printer is attached in Address field. After that, type “: 9100” for port 1, “: 9101” for port 2 or “: 9102” for port 3. 2....
Page 80 - MAC 10.5 LEOPARD USER; Ethernet Connection
MAC 10.5 LEOPARD USER NOTE: Mac OS printing is supported by Postscript printers only! W ith Mac OS X Leopard (10.5), you can use Apple Talk, Bonjour, Internet Printing Protocol (IPP), Line Printer Daemon (LPD), and HP Jetdirect - Socket printing through Print Serv er. Click this icon in your Dock to...
Page 81 - Advanced; AppleTalk; Make AppleTalk Active; Apply
Click the Advanced button and then the AppleTalk tab as show below. Select the Make AppleTalk Active option, then click OK and the Apply button. AppleTalk is now activ e on the system. Now a printer can be added.
Page 82 - Adding a Printer
Adding a Printer Click this icon in your Dock to open your System Preferences , click Print & Fax icon. The following screen will appear. Click the add button “ + ” to add a new printer. Mac OS X Leopard (10.5) supports fiv e printing protocols: 1. AppleTalk
Page 83 - AppleTalk-enabled or Bonjour-enabled Printers
2. Bonjour 3. Internet Printing Protocol (IPP) 4. Line Printer Daemon (LPD) 5. HP Jetdirect – Socket To add an Internet Printing Protocol enabled, Line Printer Daemon enabled or HP Jet Direct – Socket enabled printer, click the button and follow the instructions to add an IP Printer beginning on “Ad...
Page 86 - For set up LPD Printing:
Type the IP Address of the printer, the name will appear in the Name field when the printer is found. This window will indicate that it is v erifying the address. If the printer is found, this window will state “Valid and complete address” under the Address field. The printer utility is able to dete...
Page 87 - For set up IPP Printing:
2. Type the port name in Queue field. Click Add button after done the section of printer model in the Print Using drop-down menu. For set up IPP Printing: 1. Enter the IP address of the print serv er in Address field. After that, enable print serv er’s second port, and type “: second port” . NOTE: I...
Page 90 - MAC OS 10.4 TIGER USER
MAC OS 10.4 TIGER USER NOTE: Mac OS printing is supported by Postscript printers only! W ith Mac OS X Tiger (10.4), you can use Apple Talk, Bonjour, Internet Printing Protocol (IPP), Line Printer Daemon (LPD), and HP Jet Direct-Socket printing through Print Serv er. Click this icon in your Dock to o...
Page 93 - Printer Browser
Macintosh, you will be prompted to add a printer. Click Add button on the pop-up dialogue box to open Printer Browser window. Mac OS X Tiger (10.4) supports fiv e printing protocols: 1. AppleTalk 2. Bonjour 3. Internet Printing Protocol (IPP) 4. Line Printer Daemon (LPD) 5. HP Jet Direct – Socket To...
Page 97 - port”
Printing Protocol (IPP), Line Printer Daemon (LPD), and HP Jet Direct – Socket) are basically the same. Illustrated examples are include below for the sake of reference. For set up LPD Printing: 1. Enter the IP address of the print serv er to which the printer is attached in Address field. 2. Type t...
Page 99 - Continue
Click Add button after done the section of printer model in the Print Using drop-down menu. W hen the Installable Options pop-up window shows up as below, click Continue button.
Page 101 - MAC OS 10.3 PANTHER USER
MAC OS 10.3 PANTHER USER NOTE: Mac OS printing is supported by Postscript printers only! W ith Mac OS X Panther (10.3), you can use Apple Talk, Line Printer Daemon (LPD), and Rendezv ous, printing through Print Serv er. Click this icon in your Dock to open your System Preferences window as below. Cl...
Page 103 - Utilities; Printer Setup Utility; Printer List
In the Utilities folder, find and select Printer Setup Utility to open Printer List window. If no printer has been set up on your Macintosh, you will be prompted to add a printer. Click Add button on the pop-up dialogue box to open the window below.
Page 104 - IP Printing; Rendezvous
Mac OS X Panther (10.3) supports three printing protocols: 1. AppleTalk 2. Rendezv ous 3. Line Printer Daemon (LPD) To add an LPD enabled printer, click IP Printing in the drop-down menu and follow the instructions to add an IP Printer beginning on “Adding an IP printer” session. AppleTalk-enabled o...
Page 105 - Name; Printer Model; Auto Select; Print Model
Select a printer name from the Name list. The printer name selected should be the same as that appearing listed in the Printer Serv er’s web manager. In the example here, the printer name is PS-1168-U1. By default the Printer Model will use the Auto Select to determine what printer configuration to ...
Page 107 - Set up LPD Printing:
After selecting IP Printing , a window displays as follows: Set up LPD Printing: 1. Enter the IP address of the print serv er to which the printer is attached in the Printer Address field. 2. Type the port name in Queue field. 3. The printer utility is able to detect the printer and may automaticall...
Page 108 - Rendezvous Uses in MAC OS 10.2; . Rendezvous is a revolutionary networking
drop-down menu if the model is not listed. 4. To implement the setting, click Add button. Rendezvous Uses in MAC OS 10.2 The latest version of MAC OS provides a new feature that is called Rendezvous . Rendezvous is a revolutionary networking technology standard that lets you create an instant networ...
Page 109 - Launch Print Center. Press and hold the Option key, click the; When clicking the; item, the following window
1. Launch Print Center. Press and hold the Option key, click the Add button. 2. Select Rendezvous from the pop-up menu. 3. When clicking the Rendezvous item, the following window appears to display the connected Rendezvous-enabled printers. Connected printer(s)
Page 110 - Generic; The printer is installed into the system successfully.
4. Select the desired printer, and the following pop-up menu displays the printer’s manufacturer. Select Generic . 5. The printer is installed into the system successfully.
