TRENDNet TDM-E400 - Manual

English 3 2. Hardware Installation 3. Attach the power connector to the ADSL2+ ethernet router. 2. Connect the RJ-45 cable (and/or connect the USB cable for TDM-C400 USB combo Model only). 1. Connect the RJ-11 cable. 4. Allow the device 60 seconds to boot. Verify that the WAN and LAN LEDs are on.

English 4 3. Software Installation (TDM-C400 only) Note: For Windows 98/98SE applications, you may need the Windows 98/98SE CD ROM to complete the installation.Before starting the software setup process, close all Windows programs currently running on your PC. 1. The system automatically detects the...

English 5 3. The “Welcome!” windows appears. Exit all Windows programs before continuing. Then, click on Next . 4. Please review the license agreement and click Accept to continue. 5. The USB Modem Setup Wizard will begin installing the software and indicates the progress of the installation. 6. If ...

7. A message will be displayed requiring you to reboot the system. Select “Yes, reboot the computer now” and then click Close . 9. From Programs, go to TRENDnet DSL Modem and click on the DSL Status. English 6 8. After rebooting, the device will be installed. Please click Finish . 10. The “Physical ...

English 8 4. The Quick Configuration table will appear requiring you to fill in the fields with the appropriate information provided by your Service Provider. 5. Then click the Submit button. 6. Click Admin in the Web Configuration screen. 7. Click Commit & Reboot . 8. Click Commit .

9. The browser will indicate that your changes have been committed successfully. 10. The Reboot Mode scroll by default is Reboot in the Commit & Reboot sub-session. 11. Click the Reboot button to reboot your ADSL2+ modem router. 12. Please wait 15 ~ 20 seconds for reboot to finish completely. Do...

10 Troubleshooting Q1: A1: Q2: A2: POWER LED does not illuminate after the product is turned on. What should I do? Verify that you are using the power cable provided with the device and that it is securely connected to the ADSL2+ modem and a wall socket/power strip. I am not sure what type of Intern...

Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received. Including interference that may cause undesired oper...

Copyright ©2006. All Rights Reserved. TRENDnet. Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com TRENDnet Technical Suppor t US Canada 24/7 Tech Support Toll Free Telephone: 1(866) 845-3673 Europe (Germany France ...