TRENDNet Net Spot Wireless Access Point - Manual

TRENDNet Net Spot Wireless Access Point

TRENDNet Net Spot Wireless Access Point – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
Page: / 14

Table of Contents:

  • Page 2 – Table of Contents
  • Page 3 – Verify Equipment; Before setting up the Access Point, you should have the following:; Verify Package Contents; Please make sure you have everything in the box:; Prepare for Installation; English QIG; English
  • Page 4 – Connect the power adapter to the Access Point. Make sure you use the; Verify Hardware Installation; If you are using a wired computer to configure the Access Point,
  • Page 6 – Under the IP Address tab, click on; Specify an IP address; and enter; OK; Click
  • Page 7 – Yes; to reboot your system.
  • Page 9 – General; tab, locate and click I; nternet Protocol TCP/IP; and then; Properties; Click on; Use the following IP address
  • Page 10 – Your computer is ready to access and configure the Access Point.
  • Page 11 – Configure the Access Point; From a Wired Computer; Open a web browser (Internet Explorer or Netscape) and enter; Enter; 53APB's authentication window will appear. Type; admin; and type; password; System
  • Page 12 – Select your country from the pull down menu, click; Fixed IP Address
  • Page 13 – Troubleshooting; I cannot connect to my network using wireless computers.; If you have a DHCP server in your network, you need to go into TCP/IP
  • Page 14 – Product Warranty Registration; Please take a moment to register your product online.; TRENDnet Technical Support; US/Canada Support Center; Contact
Loading the manual

Copyright ©2005. All Rights Reserved. TRENDware International, Inc.

TRENDnet

TRENDware, USA

What's Next in Networking

TEW-453APB

Version 03.02.2005

Hot Spot Wireless Access Point

Quick Installation Guide

Point d'accès sans fil sensible

Guide d'installation rapide

Drahtloser Access Point für Hotspots

Kurzanleitung zur Installation

Guía de instalación rápida del

punto de acceso inalámbrico Hot Spot

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Table of Contents

Table of Contents English ...................................................................................................... Troubleshooting........................................................................................... 1 1 239 11 1. Prepare for Installation ............................

Page 3 - Verify Equipment; Before setting up the Access Point, you should have the following:; Verify Package Contents; Please make sure you have everything in the box:; Prepare for Installation; English QIG; English

Thank you for purchasing TRENDnet's TEW-453APB Hot Spot Wireless Access Point. This guide will help you set-up your Access Point quickly and easily. Just follow the step-by-step instructions below, and enjoy the benefits of accessing the Internet without ever being tied down to wires! If you run int...

Page 4 - Connect the power adapter to the Access Point. Make sure you use the; Verify Hardware Installation; If you are using a wired computer to configure the Access Point,

2 1. Locate an optimum location for the Access Point. The best place for the Access Point is usually at the center of your wireless network. 2. Connect the RJ45 network cable to the Access Point, then connect the other end of the network cable to a Switch or Hub. The Access Point is now connected to...

Other TRENDNet Models

All TRENDNet Other