TP-Link TLSG1210P - User Manual
TP-Link TLSG1210P Switch – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Installation Guide
Unmanaged Desktop PoE+ Switch
© 2021 TP
-Link 7106509290 RE
V6.0.1
Switches Explanation
(Only for TL-SG1210MP)
Off:
Ports run at 10/100/1000 Mbps and support PoE power supply up to 100 m away.
On:
Ports run at 10 Mbps and support PoE power supply up to 250 m away.
Extend
Connection
Note:
For simplicity, we will take TL-SG1008P for example throughout the Guide.
PC
IP Camera
AP
Ethernet Ports (1-8)
PoE Ports (1-4)
IP Phone
PoE Devices
Router
LAN Port
WAN Port
Internet
DC Power Adapter
AC Power Cord
Note
:
PoE ports can also connect to non-PoE devices, but only transmit data.
Off:
The PoE Auto Recovery function is disabled.
On:
The switch will constantly detect the working status of a PoE powered device
(PD)
.
When the switch finds that the PD works abnormally, the switch will reboot it.
Recovery
Note:
The numbers in brackets indicate the ports where the feature takes effect. For example, when Extend(1-4) is toggled to On, the Extend mode will be enabled for ports 1-4.
Off:
Ports can transmit data with each other.
On:
Specific ports cannot transmit data with other downlink ports. They can transmit data
only with the uplink ports.
Isolation
Off:
All the ports transmit data with the same priority.
On:
The specific ports transmit data with a higher priority than other ports.
Priority
For TL-SG1210MP:
On
: 116 W≤Total power supply < 123 W
Flashing
: Total power supply ≥ 123 W
Off
: Total power supply < 116 W
LED Explanation
Power
PoE Status
On
: Providing PoE power
Flashing
: PoE fault
Off
: Not providing PoE power
On
:
Power on
Off
:
Power off
Link/Act; Uplink 1, Uplink 2
Green On:
Running at 1000 Mbps, but no activity.
Green Flashing:
Running at 1000 Mbps and is transmitting or
receiving data.
Yellow On:
Running at 10/100 Mbps, but no activity.
Off:
No device is linked to the corresponding port.
Yellow Flashing:
Running at 10/100 Mbps and is transmitting
or receiving data.
PoE Max
For TL-SG1008P:
On
:
57 W≤Total power supply < 64 W
Flashing
:
Total power supply ≥ 64 W
Off
:
Total power supply < 57 W
For TL-SG1210P:
On
: 56 W≤Total power supply < 63 W
Flashing
: Total power supply ≥ 63 W
Off
: Total power supply < 56 W
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
