TP-Link TL-SL1311MP 8x1FE/PoE - User Manual
TP-Link TL-SL1311MP 8x1FE/PoE Switch – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Installation Guide
Connection
Unmanaged Desktop PoE/PoE+ Switch
PC
Ethernet Ports (1-8)
PoE Ports (1-4)
1. PoE ports can also connect to non-PoE devices, but only transmit data.
Note:
2. TL-SL1311MP/TL-SL1311P has three uplink ports, which typically connect to uplink devices like routers.
Uplink 1 is an SFP slot and works with a 1000 Mbps SFP module. Uplink 2 and uplink 3 are RJ45 ports.
Internet
Link/Act
On:
Link present but no activity
Flashing:
Transmitting/receiving data
Off:
No link
PoE Status
On:
PoE power provided
Flashing:
Current-overload/ Short-circuit
Off:
No PoE power provided
Power
On:
Power on
Off:
Power off
© 2022 TP
-Link 7106509988 RE
V7.3.1
LED Explanation
DC Power Adapter
AC Power Cord
Switches Explanation
Note:
For simplicity, we will take TL-SF1008P for example throughout the Guide.
Off:
Ports run at 10/100 Mbps and support PoE power supply up to 100 m away.
On:
Ports run at 10 Mbps and support PoE power supply up to 250 m away.
Extend
(for TL-SF1008LP/TL-SF1008P/TL-SF1009P/TL-SL1311P/TL-SL1311MP)
PoE MAX
TL-SF1008LP
Off:
Total power supply < 34 W
On:
34 W ≤ Total power supply < 41 W
Flashing:
Total power supply ≥ 41 W
TL-SF1008P
Off:
Total power supply < 59 W
On:
59 W ≤ Total power supply < 66 W
Flashing:
Total power supply ≥ 66 W
TL-SF1009P/TL-SL1311P
Off:
Total power supply < 58 W
On:
58 W ≤ Total power supply < 65 W
Flashing:
Total power supply ≥ 65 W
TL-SL1311MP
Off:
Total power supply < 117 W
On:
117 W ≤ Total power supply < 124 W
Flashing:
Total power supply ≥ 124 W
Off:
The PoE Auto Recovery function is disabled.
On:
The switch will constantly detect the working status of a PoE powered device (PD). When
the switch finds that the PD works abnormally, the switch will reboot it.
Recovery
(For TL-SF1008P/TL-SL1311P/TL-SL1311MP)
Off:
Ports can transmit data with each other.
On:
Specfic ports cannot transmit data with other downlink ports. They can transmit data
only with the uplink ports.
Isolation
(For TL-SF1009P/TL-SL1311P/TL-SL1311MP)
Off:
All the ports transmit data with the same priority.
On:
The specific ports transmit data with a higher priority than other ports.
Priority
(For TL-SF1008LP/TL-SF1008P/TL-SF1009P)
Note:
The numbers in brackets indicate the ports where the feature takes effect. For example, when Extend(1-4) is toggled to On, the Extend mode will be enabled for ports 1-4.
IP Camera
AP
IP Phone
Powered Device (PD)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
