Page 2 - COPYRIGHT & TRADEMARKS; Specifications are subject to change without notice.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form ...
Page 3 - FCC STATEMENT; Reorient or relocate the receiving antenna.; CE Mark Warning
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses ...
Page 4 - Safety Information; Avoid water and wet locations.
Safety Information When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. Don’t disassemble the product, or make r...
Page 5 - DECLARATION OF CONFORMITY; For the following equipment:; Wired Network Camera; The product carries the CE Mark; Yang Hongliang
TP-LINK TECHNOLOGIES CO., LTD TP-LINK TECHNOLOGIES CO., LTD. Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China DECLARATION OF CONFORMITY For the following equipment: Product Description: Wired Network Camera Model No.: TL-S...
Page 6 - CONTENTS; Chapter 1
i CONTENTS Package Contents.............................................................................................................. 1 Chapter 1 Safety Instructions........................................................................................ 2 Chapter 2 Minimum System Requirement &am...
Page 7 - Appendix ...................................................................................................35
ii 5.4.1 Initialize.................................................................................................................. 32 5.4.2 Date Time .............................................................................................................. 33 5.5 Language .......................
Page 8 - Package Contents
1 Package Contents The following items should be found in your package: TL-SC2020 Wired Network Camera Power Adapter Mounting Bracket with three screws, a Lock Ring, a Brace and a Base Plate RJ45 Cable Quick Installation Guide Resource CD, including: This User Guide Application Guide...
Page 9 - Avoid operating or storing the Camera in the following locations:
2 Chapter 1 Safety Instructions Before you use this product This product has been designed with safety in mind. However, the electrical products can cause fires which may lead to serious body injury if not used properly. To avoid such accidents, be sure to heed the following. Legal Caution Video...
Page 10 - System Requirement
3 Chapter 2 Minimum System Requirement & Product Feature 2.1 System Requirement For normal operation and viewing of the network camera, it’s recommended that your system meets these minimum requirements for proper operation: Item Requirements CPU Pentium 4 2.8GHz (or equivalent AMD) Graphic Card...
Page 11 - Up to 3 users; Physical Overview; there are data being transmitted.; Power LED Indicator; The Camera boots up.
4 Supported protocols TCP/IP, DHCP, PPPoE, ARP, ICMP, FTP, SMTP, DNS, NTP, UPnP, RTSP, RTP, RTCP, HTTP, TCP, UDP Simultaneous Connection Up to 3 users Operating conditions 0°C ~ 40 ℃ (32 ℉ ~ 104 ℉ ) HARDWARE Lens F 2.4 fixed lens Audio Output 1 Power 5V DC, 1A 2.3 Physical Overview 2.3.1 Front View ...
Page 12 - Mount the Camera
5 2.3.2 Rear View Power Jack LAN Port RESET Button Base Plate Power Jack : The power connector is where you connect the power adapter. RESET : Press the button for more than 15 seconds, and the Camera will be restored to factory defaults. LAN Port : Through this port, you can connect the Camer...
Page 13 - To mount the Camera, please follow the steps below:; Hardware Connection; Please connect the Camera according to the following steps.
6 diameter is 4±0.2 mm. 2.4.2 Wall and Ceiling Mount There are two ways to mount the Camera. See the following two pictures. Ceiling Mount Wall Mount To mount the Camera, please follow the steps below: 1. Use the three supplied screws to fix the base plate to a flat surface. 2. Loosen the lock ring ...
Page 14 - Obtain the IP Address; Intelligent IP Installer
7 Chapter 3 Using Camera via Web Browser 3.1 Obtain the IP Address 1. Insert the provided CD into your CD-ROM driver. The Setup Wizard will automatically pop up on your computer’s screen as shown in the figure below. Figure 3-1 2. Choose the Intelligent IP Installer , and then the next screen appear...
Page 15 - Search; button to search Network Cameras in the
8 start using the program. Figure 3-3 4. The following screen will then display. Click the Search button to search Network Cameras in the network; it displays Network Cameras information including IP Address. Figure 3-4
Page 16 - Windows Web Browser; Link to IE; Use the default User name; and default Password; admin
9 3.2 Windows Web Browser The configuration of browser is similar in Windows XP/Vista/7. Here we take IE browser in Windows XP for example. 1 Click Link to IE button in Figure 3-4 directly. You can also launch your web browser and then enter the IP address or host name of the Camera in the Location ...
Page 17 - and
10 3 The monitor image will be displayed in your browser. In the far left side of main configuration are Home, Information, Basic setup, System and Language.
Page 18 - Mobile Phone Viewing; 3G Mobile Phone Streaming Viewing; For 3G mobile phone viewing, type “; Using Camera via iPhone
11 Chapter 4 Operating Camera via Mobile Phone 4.1 Mobile Phone Viewing 4.1.1 3G Mobile Phone Streaming Viewing For 3G mobile phone viewing, type “ rtsp://<IP>:<PORT>/video.mjpg ” into your 3G Streaming Link. <IP> is the Public IP address of your Camera; <PORT> is the RTSP po...
Page 20 - Home; Storage Requirement Table
13 Chapter 5 Configuration of Main Menu In the left side of main configuration are Home , Information , Basic setup , System and Language . 5.1 Home In the right side, you can control Live View in your main Browser. The functions include: Snapshot, Open digital zoom, Audio, and Video Play . Zoom Aud...
Page 21 - Digital zoom in/out the image via the monitor window; Symbols Meaning
14 5.1.2 Snapshot You can capture a still image shot by clicking the Camera icon and save it in the operating computer. Symbols Meaning A snapshot window appears after clicking the icon Save Image Save the picture captured by snapshot into your computer Close Return to the view screen 5.1.3 Digital ...
Page 22 - Information; Product Name, Current; This function is only for the Administrator. Click; Basic setup; to display the submenus:
15 5.2 Information The Information screen provides the product factory information which includes Product Name, Current Version, Firmware current Date/Time, Image Setting, Video and Network. 5.3 Basic setup This function is only for the Administrator. Click Basic setup to display the submenus: Accou...
Page 23 - To add a new account, please follow the steps below:
16 Add : Click this button to add a new account. Modify : Click this button to edit the selected account. Remove : Click this button to delete the selected account. Anonymous Viewer : Select Disable and the anonymous viewers cannot access the Camera. Select Enable to and the anonymous users ...
Page 27 - How to apply DDNS username and Host name?; You can apply DDNS username and Host name by
20 2) The Camera needs to be rebooted after it finishes changing the network completely. For more details, please refer to 5.4.1 Initialize. 3) You can reset the Camera to its factory default settings by pressing the Reset button. Then the Camera can be found by Intelligent IP Installer. 5.3.2.3 DDN...
Page 28 - Account
21 2. Input all information and follow step by step with DynDNS. 3. Login with new account and click Account → My Hosts → Add Host Services.
Page 29 - Type domain in the; Hostname; field and select
22 4. Type domain in the Hostname field and select sub-domain. 5. After typing information, check your DDNS service
Page 30 - Type your DDNS User ID, Password and Host name in; Setting; If you have a Router
23 6. Type your DDNS User ID, Password and Host name in Setting → Network → DDNS . After completing setting, reboot the Camera. 5.3.2.4 UPnP (Universal Plug and Play) If you have a Router to access to Internet and the Router supports UPnP IGD function, you need to turn on the UPnP Port Forwarding fu...
Page 31 - HTTP Port; : Enter the HTTP port number and default HTTP port is 80.; Brightness
24 HTTP Port : Enter the HTTP port number and default HTTP port is 80. SSL Port: Enter the SSL port number and default SSL port is 443. RTSP Port: Enter the RTSP port, default value is 554 for computer view. Note: UPnP (Universal Plug and Play): UPnP is a set of computer network protocol. It...
Page 33 - Camera Name; : You can enter a new name for the Camera.; LED; to enable the LEDs select; Off; to disable the LEDs.
26 Camera Name : You can enter a new name for the Camera. LED : Select On to enable the LEDs; select Off to disable the LEDs. 5.3.7 Events Click Events to display the submenus including Motion detection, e-Mail (SMTP) and FTP. 5.3.7.1 Motion detection There are three Motion Detection functions a...
Page 38 - System
31 Schedule Selection : Select the list box to specify the schedule you want to set. FTP -Alarm / E-mail (SMTP) -Alarm Start Time, End Time : Specify the Start Time and the End Time . Use the same time schedule every day: When this is checked, the Start Time and End Time set to Mon (Monday) ...
Page 41 - Language
34 5.5 Language Select a language from the drop-down list, the present display language of WEB User Interface will be changed.
Page 42 - Appendix; Help to set Camera with your network; Image Size; Help to set Recording Storage System; MJPEG Storage Requirement GB /1 Channel / Day
35 Appendix A. Frame-rate and Bitrate Table – Help to set Camera with your network environment to access Internet. Base on your network upload environment to choose the suitable Image-Quality setting. For example, if the network environment is ADSL 256Kb (upload) / 2Mb (download), the most fluent Im...
Page 43 - C. System Requirement –; Help to setup System; Item Requirements
36 640*480 15 4970 51.2 640*480 10 3162 32.6 640*480 7 2427 25.0 640*480 5 1961 20.2 640*480 1 392 4.0 320*240 30 3416 35.2 320*240 20 2270 23.4 320*240 15 1770 18.2 320*240 10 1188 12.2 320*240 7 900 9.3 320*240 5 706 7.3 320*240 1 147 1.5 160*120 30 1493 15.4 160*120 20 989 10.2 160*120 15 756 7.8...
Page 44 - Europe – EU Declaration of Conformity
37 Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: Clause De...
Page 47 - Federal Communication Commission Interference Statement
40 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential i...
