Page 2 - COPYRIGHT & TRADEMARKS; Specifications are subject to change without notice.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form ...
Page 4 - CONTENTS
CONTENTS Package Contents .................................................................................................... 1 Chapter 1. Introduction ........................................................................................ 2 1.1 Product Overview ......................................
Page 6 - ADSL2+ Modem Router User Guide; Package Contents
TD-8817 ADSL2+ Modem Router User Guide 1 Package Contents The following items should be found in your package: ¾ One TD-8817 ADSL2+ Modem Router ¾ One Power Adapter for TD-8817 ADSL2+ Modem Router ¾ Quick Installation Guide ¾ One RJ45 cable ¾ One USB cable ¾ Two RJ11 cables ¾ One ADSL splitter ¾ One...
Page 7 - Chapter 1. Introduction; Product Overview; IP; ADSL; and CWMP
TD-8817 ADSL2+ Modem Router User Guide 2 Chapter 1. Introduction Thank you for choosing the TD-8817 ADSL2+ Modem Router. 1.1 Product Overview The device is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet network. TD-8817 connects to an Ethernet LAN or ...
Page 8 - Supports Virtual Server, DMZ host and IP Address Mapping.
TD-8817 ADSL2+ Modem Router User Guide 3 ¾ Built-in DHCP server. ¾ Built-in firewall, supports IP/MAC filter, Application filter and URL filter. ¾ Supports Virtual Server, DMZ host and IP Address Mapping. ¾ Supports Dynamic DNS, UPnP and Static Routing. ¾ Supports system log and flow Statistics. ¾ S...
Page 9 - Chapter 2. Hardware Installation; The Front Panel; Name; for more information about how to make Internet connection
TD-8817 ADSL2+ Modem Router User Guide 4 Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The LEDs are located on the front panel, they indicate the device’s working status. For details, please refer to LED Explanation. LED Explanation: Name Status Indication On The modem router is po...
Page 10 - and; Installation Environment; The Router can be placed on a shelf or desktop.; Hardware installation procedures
TD-8817 ADSL2+ Modem Router User Guide 5 configuration. You may need to check this part of information with your ISP and make sure everything have been input correctly. Refer to 4.1.1 Device Info and 4.3.1 Internet for more information. 2.2 The Back Panel Figure 2-2 ¾ ON/OFF : The switch for the pow...
Page 11 - the other end to a standard electrical outlet.; Last Step
TD-8817 ADSL2+ Modem Router User Guide 6 Third Step : Plug one end of the provided Power Adapter into the Power jack on the Router and the other end to a standard electrical outlet. Last Step : Check the line connection to see if everything is ready. Power up finally. Figure 2-3
Page 12 - Chapter 3. Quick Installation Guide; Click the
TD-8817 ADSL2+ Modem Router User Guide 7 Chapter 3. Quick Installation Guide 3.1 Configure PC After you directly connect your PC to the TD-8817 or connect your adapter to a Hub/Switch which has connected to the Router, you need to configure your PC’s IP address. Follow the steps below to configure i...
Page 13 - Configure the IP address as Figure 3-4 shows. After that, click; OK
TD-8817 ADSL2+ Modem Router User Guide 8 Figure 3-3 Step 4: Configure the IP address as Figure 3-4 shows. After that, click OK . Figure 3-4
Page 14 - You can c; USB Configuration
TD-8817 ADSL2+ Modem Router User Guide 9 ) Note: You can c onfigure the PC to get an IP address automatically, select “Obtain an IP address automatically” and “Obtain DNS server address automatically” in the screen above. Now, you can run the Ping command in the command prompt to verify the network ...
Page 15 - USB Drive installation procedures; Browse CD; to read the; Next
TD-8817 ADSL2+ Modem Router User Guide 10 obtain the drivers from the provided CD, or download from our website. ( http://www.tp-link.com ) USB Drive installation procedures Step 1: Please connect your PC to the Router through the USB port at first, then insert the provided CD into your CD-ROM drive...
Page 16 - ) All of the above settings are under windows XP.; admin
TD-8817 ADSL2+ Modem Router User Guide 11 Figure 3-9 ) Note: 1) All of the above settings are under windows XP. 2) If you want to pull out the USB device you must disconnect the network of USB first. 3) In the Vista operating system, maybe the “Unknown Device” screen will pop up when you insert the ...
Page 17 - Select the; Quick Start; the; Configure the time for the Router, and then click the; NEXT; Select the connection type to connect to the ISP (We select; NEXT
TD-8817 ADSL2+ Modem Router User Guide 12 Figure 3-10 Step 1: Select the Quick Start tab, then click RUN WIZARD , and you will see Figure 3-11. Click the NEXT button. Figure 3-11 Step 2: Configure the time for the Router, and then click the NEXT button. Figure 3-12 Step 3: Select the connection type...
Page 18 - Configure the following options provided by your ISP:
TD-8817 ADSL2+ Modem Router User Guide 13 Figure 3-13 Step 4: Configure the following options provided by your ISP: Username , Password , VPI , VCI and Connection Type . Then click NEXT . Figure 3-14 Step 5: Click NEXT to finish the Quick Start. Figure 3-15
Page 19 - Chapter 4. Software Configuration; Choose “
TD-8817 ADSL2+ Modem Router User Guide 14 Chapter 4. Software Configuration This User Guide recommends using the “Quick Installation Guide” for first-time installation. For advanced users, if you want to know more about this device and make use of its functions adequately, maybe you will get help fr...
Page 20 - Status; ” menu, and you will be able to query the logs of the Router.
TD-8817 ADSL2+ Modem Router User Guide 15 Figure 4-2 4.1.2 System Log Choose “ Status → System Log ” menu, and you will be able to query the logs of the Router.
Page 23 - Please refer to; Interface Setup; LAN; Interface Setup; ” menu, you can configure the parameters for WAN ports in
TD-8817 ADSL2+ Modem Router User Guide 18 4.2 Quick Start Please refer to " 3.3: Login" . 4.3 Interface Setup Choose “ Interface Setup ”, you can see the next submenus: Internet and LAN . Figure 4-5 Click any of them, and you will be able to configure the corresponding function. 4.3.1 Intern...
Page 24 - If you want to use a designed VC, you should activate it.
TD-8817 ADSL2+ Modem Router User Guide 19 Figure 4-6 ¾ ATM VC: ATM settings are used to connect to your ISP. Your ISP provides VPI (Virtual Path Identifier), VCI (Virtual Channel Identifier) settings to you. In this Device, you can totally setup 8 VCs on different encapsulations, if you apply 8 diff...
Page 30 - If; Use Auto Discovered DNS Server Only; is selected in DNS Relay, this router will accept the; Use User Discovered DNS Server Only; is selected in
TD-8817 ADSL2+ Modem Router User Guide 25 The Router will work as a DHCP Server, it becomes the default gateway for DHCP client connected to it. DHCP stands for Dynamic Host Control Protocol. The DHCP Server gives out IP addresses when a device is booting up and request an IP address to be logged on...
Page 31 - Select; Relay; Enter the DHCP server IP Address runs on WAN; Disabled; , the DHCP function will not take effect.
TD-8817 ADSL2+ Modem Router User Guide 26 ¾ DHCP Relay: Select Relay , then you will see the next screen (shown in Figure 4-13), the Router will work as a DHCP Relay. A DHCP relay is a computer that forwards DHCP data between computers that request IP addresses and the DHCP server that assigns the a...
Page 32 - Advanced Setup; ” menu, and you will see the next screen (shown in Figure; Advanced Setup; ” menu, and you will see the routing information in the next
TD-8817 ADSL2+ Modem Router User Guide 4.4 Advanced Setup Choose “ Advanced Setup ”, you can see the next submenus: Figure 4-14 Click any of them, and you will be able to configure the corresponding function. 4.4.1 Firewall Choose “ Advanced Setup → Firewall ” menu, and you will see the next screen ...
Page 33 - Click; ADD ROUTE; This parameter specifies the IP network address of the final
TD-8817 ADSL2+ Modem Router User Guide 28 Click ADD ROUTE button to add a new route in the next screen (shown in Figure 4-17). Figure 4-17 ¾ Destination IP Address: This parameter specifies the IP network address of the final destination. ¾ IP Subnet Mask: Enter the subnet mask for this destination....
Page 35 - For VCs with single IP, select; Single
TD-8817 ADSL2+ Modem Router User Guide 30 Figure 4-20 ¾ Rule Index: The Virtual server rule index for this VC. You can specify 10 rules in maximum. All the VCs with single IP will use the same Virtual Server rules. ¾ Start & End port number: Enter the specific Start and End Port number you want ...
Page 36 - Enter the public IP Address you want to do NAT. Public Start IP is the; Address Mapping List:; This displays the information about the Mapping addresses.; is only available for VCs with Multiple IPs.
TD-8817 ADSL2+ Modem Router User Guide 31 Figure 4-21 Figure 4-22 ¾ Rule Index: Select the Address Mapping Rule index for this VC. You can specify 8 rules in maximum. ¾ Rule Type: There are four types, one-to-one, Many-to-One, Many-to-Many Overload and Many-to-Many No-overload. ¾ Local Start & E...
Page 39 - Assign VLAN PVID for each Interface; in Figure 4-24, you can assign the PVID for each
TD-8817 ADSL2+ Modem Router User Guide 34 can communicate as if they were attached to the same LAN, when in fact they are located on a number of different LAN segments. Because VLANs are based on logical instead of physical connections, it is very flexible for user/host management, bandwidth allocat...
Page 41 - Select the ADSL operation mode which your ADSL connection uses.; Access Management; Access Management; through selected applications.
TD-8817 ADSL2+ Modem Router User Guide 36 Figure 4-27 ¾ ADSL Mode: Select the ADSL operation mode which your ADSL connection uses. ¾ ADSL Type: Select the ADSL operation type which your ADSL connection uses. 4.5 Access Management Choose “ Access Management ”, you can see the next submenus: Figure 4-...
Page 43 - Select the filter type for the configuration below.
TD-8817 ADSL2+ Modem Router User Guide 38 Figure 4-30 ¾ Filter Type Selection: Select the filter type for the configuration below. ¾ IP/MAC Filter Set Index: Select the Set index for the IP Filter entry. This index can match with six IP / MAC Filter Rule Indexes. ¾ Interface: Select the interface fo...
Page 44 - You should set the; IP/MAC Filter Set Index; IP/MAC Filter Rule Index; together to appoint
TD-8817 ADSL2+ Modem Router User Guide 39 ) Note: You should set the IP/MAC Filter Set Index and IP/MAC Filter Rule Index together to appoint the address (shown in the Filter List) for the IP Filter rule. For example, (1, 2), it means the rule will be shown in the row 2 IP/MAC Filter Set Index 1. ¾ ...
Page 45 - If you want to make the rule take effect, please select; Yes; to active the rule.; IP / MAC Filter Set Index; to view the information about the rule.
TD-8817 ADSL2+ Modem Router User Guide 40 ) Note: If you want to make the rule take effect, please select Yes to active the rule. Step 3: Enter the “Source IP Address”, “Destination IP Address”, “Subnet Mask” and “Port Number” in the corresponding field. Step 4: Select the Protocol as “TCP” and sele...
Page 52 - to make the new password take effect.
TD-8817 ADSL2+ Modem Router User Guide 47 Figure 4-38 Click any of them, and you will be able to configure the corresponding function. 4.6.1 Administration Choose “ Maintenance → Administration ”, you can set new password for admin in the screen (shown in Figure 4-39). Figure 4-39 ) Note: 1) There i...
Page 53 - PC’s Clock; as the Synchronize time, you don’t need to set any items.; Manually
TD-8817 ADSL2+ Modem Router User Guide 48 Figure 4-40 ) Note: The ADSL Router built-in some NTP Servers, when the Router connects to the Internet, the Router will get the system time automatically from the NTP Server. You can also configure the NTP Server address manually, and then the Router will g...
Page 54 - ) New firmware versions are posted at
TD-8817 ADSL2+ Modem Router User Guide 49 Figure 4-42 4.6.3 Firmware Choose “ Maintenance → Firmware ”, you can upgrade the firmware of the Router in the screen (shown in Figure 4-43). Make sure the firmware or romfile you want to use is on the local hard drive of the computer. Click Browse to find ...
Page 55 - ) The router will reboot after the upgrading has been finished.; ROMFILE SAVE
TD-8817 ADSL2+ Modem Router User Guide 50 2) When you upgrade the router's firmware, you may lose its current configurations, so please back up the router’s current settings before you upgrade its firmware. 3) Do not turn off the router or press the Reset button while the firmware is being upgraded....
Page 56 - ”, you can select to restart the device with current settings; Maintenance; ”, you can view the test results for the connectivity of the; Help
TD-8817 ADSL2+ Modem Router User Guide 51 4.6.4 SysRestart Choose “ Maintenance → SysRestart ”, you can select to restart the device with current settings or restore to factory default settings in the screen (shown in Figure 4-46). Figure 4-46 4.6.5 Diagnostics Choose “ Maintenance → Diagnostics ”, ...
Page 58 - Appendix A: Specifications; General
TD-8817 ADSL2+ Modem Router User Guide 53 Appendix A: Specifications General Standards and Protocols ANSI T1.413, ITU G.992.1, ITU G.992.2, ITU G.992.3, ITU G.992.5 IEEE 802.3, IEEE 802.3u, TCP/IP, PPPoA , PPPoE, SNTP, HTTP, DHCP, ICMP, NAT,CWMP Safety & Emission FCC, CE Ports 1 10/100M Auto-Neg...
Page 59 - Appendix B: Troubleshooting; What can I do if I don’t know or forgot my password?
TD-8817 ADSL2+ Modem Router User Guide 54 Appendix B: Troubleshooting 1. How do I restore my Router’s configuration to its factory default settings? With the Router powered on, press and hold the RESET button on the rear panel for 8 to 10 seconds before releasing it. ) Note: Once the Router is reset...
Page 60 - Network Connections; Properties
TD-8817 ADSL2+ Modem Router User Guide 55 Click Network Connections Right-click Local Area Connection Click Properties
Page 63 - Go to
TD-8817 ADSL2+ Modem Router User Guide 58 For Windows Vista OS Go to Start > Settings > Control Panel , and then you will see the following page. Click View network status and tasks Click View status Click Properties
Page 66 - Obtain an IP; Obtain DNS
TD-8817 ADSL2+ Modem Router User Guide 61 Double-click Internet Protocol Version 4 (TCP/IPv4) Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK
Page 67 - What can I do if I cannot access the Internet?
TD-8817 ADSL2+ Modem Router User Guide 62 2) Configure your IE browser Open your IE browser, click Tools tab and you will see the following screen. Click Internet Options Click OK Select Never dial a connection Now, try to log on to the Web-based configuration page again after the above settings hav...
Page 68 - then try to see
TD-8817 ADSL2+ Modem Router User Guide 63 try the following steps. If you cannot, please set your computer referring to T3 then try to see if you can access the Internet. If the problem persists, please go to the next step. 3) Consult your ISP and make sure all the VPI/VCI, Connection Type, account ...
Page 69 - Appendix C: Technical Support; Turkish Service
TD-8817 ADSL2+ Modem Router User Guide 64 Appendix C: Technical Support Technical Support For more troubleshooting help, go to: www.tp-link.com/support/faq.asp To download the latest Firmware, Driver, Utility and User Guide, go to: www.tp-link.com/support/download.asp For all other technical s...
