Page 2 - II; COPYRIGHT & TRADEMARKS; Specifications are subject to change without notice.
II COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any fo...
Page 3 - III; FCC STATEMENT; Reorient or relocate the receiving antenna.; CE Mark Warning; meets the requirements of the following standards:; SAFETY NOTICES
III FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, u...
Page 4 - Package contents
IV Package contents The following contents should be found in your box: ¾ One TD-8840 External ADSL2+ ROUTER ¾ One AC power Adapter for TD-8840 External ADSL2+ ROUTER ¾ One Resource CD for TD-8840 External ADSL2+ ROUTER, including: • This Guide • Other Helpful Information • Quick installation Guide ...
Page 5 - COMMENT
V COMMENT Chapter 1. Introduction ........................................................................................ 1 1.1 Product Overview ...................................................................................................... 1 1.2 Main Features ..................................
Page 6 - External ADSL2+ Router User Guide; Chapter 1. Introduction; Product Overview
TD-8840 External ADSL2+ Router User Guide 1 Chapter 1. Introduction 1.1 Product Overview TP-LINK® TD-8840 External ADSL2+ ROUTER is the latest product designed and manufactured by TP-LINK TECHNOLOGIES CO., LTD. With TP-LINK’s excellent circuit design and high quality production, we guarantee the ADS...
Page 7 - Real-time Configuration and device monitoring; Supporting protocol
TD-8840 External ADSL2+ Router User Guide 2 ¾ Real-time Configuration and device monitoring ¾ Quick response semi-conductive surge protect circuit, provides reliable ESD and surge-protect function 1.3 Supporting protocol - G.992.1 (G.dmt) - Annex A - G.992.2 (G.lite) - Annex A - ANSI T1.413 - G.992....
Page 8 - Working environment
TD-8840 External ADSL2+ Router User Guide 3 ¾ Max upload data-rate: 1Mbps ¾ Max line length: 6Km 1.5 ATM propert ¾ AAL0, AAL5, OAM, RM, and raw cell types supported ¾ Direct hardware support for 4 Receive VCs, with additional RX VCs and TX VCs supported in software ¾ Full 24-bit Virtual Path Identif...
Page 9 - differ from the actual situation.
TD-8840 External ADSL2+ Router User Guide 4 1.9 Conventions The Router or TD-8840, or device mentioned in this User guide stands for TD-8840 External ADSL2+ ROUTER without any explanations. Parameters provided in the pictures are just references for setting up the product, which may differ from the ...
Page 10 - Chapter 2. Hardware Installation; System requirement; Indicator Description
TD-8840 External ADSL2+ Router User Guide 5 Chapter 2. Hardware Installation The TD-8840 maintains five separate interfaces, four Ethernet and one ADSL interface. The Router should not be located where it will be exposed to moisture or excessive heat. Place the Router in a location where it can be s...
Page 11 - Hardware installation procedures; First Step
TD-8840 External ADSL2+ Router User Guide 6 port Off No data transmitting or receiving on WAN port On 1~4(LAN) port normal Off Connection on 1~4(LAN) port abnormal LAN(1-4) Ethernet Flash Data transmitting or receiving on 1~4(LAN) port 2.2 Rear-panel ¾ ON/OFF : Turn on/off the ADSL2+ ROUTER’s power....
Page 12 - ROUTER and the other end to a standard electrical outlet.; Last Step
TD-8840 External ADSL2+ Router User Guide 7 ROUTER and the other end to a standard electrical outlet. Last Step : Check the line connection to see if everything is ready. Power up finally. Figure 2-1
Page 13 - Chapter 3. System Configuration; Computer Configuration; Connect the cable according to Chapter 2, turn on the power.; Network Neighbor
TD-8840 External ADSL2+ Router User Guide 8 Chapter 3. System Configuration 3.1 Computer Configuration 1. Connect the cable according to Chapter 2, turn on the power. 2. Change the IP address of your PC （ Figure 3-1 ） : Open TCP/IP Properties of the LAN card in your PC, enter the IP address as 192.1...
Page 14 - The words in fact may be different with this guide.; PING; If the screen looks like the following, you have been successful.
TD-8840 External ADSL2+ Router User Guide 9 Properties -> Right-click Local Connection -> Choose Properties -> Double-click Internet Protocol (TCP/IP). ) Note: The words in fact may be different with this guide. Remarks: you can check whether your configuration is successful through PING co...
Page 15 - “Access control”
TD-8840 External ADSL2+ Router User Guide 10 Figure 3-4 You will then see the Figure 3-5, you will see some information such as link rate and so on. Figure 3-5 User name and password is “admin”; if you want to change them, please go to “Management” Æ “Access control” Æ “Passwords” changing them. (Fi...
Page 16 - Choose “; Advanced Setup; There are 7 PVC links in the; WAN; setup page, choose the appropriate PVC according to your
TD-8840 External ADSL2+ Router User Guide 11 Figure 3-6 3.3 Web Setup Choose “ Advanced Setup ” Æ ” WAN ”, you will enter the page of Wide Area Network (WAN) Setup, you will see the Figure 3-7. Figure 3-7 There are 7 PVC links in the WAN setup page, choose the appropriate PVC according to your
Page 17 - need, and then click the; edit; button, you will enter the page of ATM PVC Configuration (See; next; to enter the
TD-8840 External ADSL2+ Router User Guide 12 need, and then click the edit button, you will enter the page of ATM PVC Configuration (See Figure 3-8) Figure 3-8 Enter VPI/VCI value and service category which is provided by your ISP, click next to enter the next step. You will see the Figure 3-9. ) No...
Page 18 - the configurations, then you will go to Internet.
TD-8840 External ADSL2+ Router User Guide 13 Figure 3-9 After choosing the proper protocol, enter the correct parameters supported by your ISP. Enable the configurations, then you will go to Internet. 1. PPP over ATM (PPPoA) If you select the protocol of PPP over ATM (PPPoA), you will see the Figure...
Page 19 - Clicking the; to
TD-8840 External ADSL2+ Router User Guide 14 Figure 3-10 You will see the Figure 3-11, then turn on the selected functions according to your demands. Clicking the next button to enter the next step, you will see the Figure 3-12, finally click save to complete the configuration. Figure 3-11
Page 21 - the; to complete
TD-8840 External ADSL2+ Router User Guide 16 Figure 3-13 You will see the Figure 3-14, then turn on the selected functions according to your needs. Clicking the next button to enter the next step, you will see the Figure 3-15, finally click save to complete the configuration. Figure 3-14
Page 24 - and the way which is provided by your ISP, then click the
TD-8840 External ADSL2+ Router User Guide 19 Figure 3-18 4. IP over ATM (IPoA) If you select the protocol of IP over ATM (IPoA), you will see the Figure 3-19, enter the parameter and the way which is provided by your ISP, then click the next button. Figure 3-19 You will see the page (Figure 3-20), t...
Page 25 - you will see
TD-8840 External ADSL2+ Router User Guide 20 Figure 3-20 Figure 3-21 5. Bridging If you select the Bridging protocol, you just open the bridge service function options, you will see the Figure 3-22, then click the next button, you will see the Figure 3-23, finally click save to
Page 26 - complete the configuration.
TD-8840 External ADSL2+ Router User Guide 21 complete the configuration. Figure 3-22 Figure 3-23 ) Note: After you complete any setup, the new setup must be saved and the Router must be restarted for
Page 27 - be assigned to servers that require permanent IP settings.; To setup an Address Reservation entry:; Choose “; ”, and you will see the LAN screen, the section allows you to
TD-8840 External ADSL2+ Router User Guide 22 the configuration to go into effect. Please click the Save/Reboot button to restart, referring to the Figure 3-24. Figure 3-24 ) Note: All of the above setup is under windows XP OS. 3.3.1 DHCP IP Reservation When you specify a reserved IP address for a PC...
Page 28 - function in this screen.; Set Address Reservation; as it showed below
TD-8840 External ADSL2+ Router User Guide 23 function in this screen. Figure 3-25 1. Click the Set Address Reservation botton, and the Address Reservation screen pop up, as it showed below ; Figure 3-26
Page 30 - The function won't take effect until the router reboots.
TD-8840 External ADSL2+ Router User Guide 25 7. Click Save/Reboot button to save the settings and reboot the router. ) Note: The function won't take effect until the router reboots. 3.3.2 DNS When you select the connection type PPPoE, PPPoA , MER or IPoA for WAN configuration, you will see the DNS m...
Page 32 - Add
TD-8840 External ADSL2+ Router User Guide 27 you to alias a dynamic IP address to a static hostname in any of the many domains, allowing your Router to be more easily accessed from various locations on the Internet. Figure 3-31 To setup DDNS, follow these instructions: 1. Click the Add button (pop-u...
Page 33 - How do I set up the connection in the windows XP?
TD-8840 External ADSL2+ Router User Guide 28 Figure 3-32 ) Note: This page allows you to add a Dynamic DNS address from DynDNS.org,TZO or No-IP. 2. Select D-DNS provider (DynDNS.org,TZO or No-IP) in the drop-down list. 3. Enter the Hostname of the DNS Server, and select the corresponding Interface f...
Page 35 - Chapter 4. Advantage management setup
TD-8840 External ADSL2+ Router User Guide 30 Chapter 4. Advantage management setup In order to satisfy our customer's needs we offer an excellent Web management interface. Feel free to utilize the Advantage application and online software upgrades. The functions of the Web management interface are a...
Page 36 - mode of AAL5 and so on.
TD-8840 External ADSL2+ Router User Guide 31 Appendix A: FAQ 1. What related parameters are required to acquire ISP when you want to access the internet by ADSL2+ Router? 1) Dial user: Connection protocol, User name, Password, Value of VPI/VCI, Encapsulation mode of AAL5 and so on. 2) Static IP user...
Page 37 - ) Resume the ADSL Modem default configuration if necessary.
TD-8840 External ADSL2+ Router User Guide 32 3) Whatever the setup of the IP address on your computer (if you close the DHCP function, you can't obtain the IP address automatically, must specify the IP address of your computer manually). 4) Run the winipcfg order in the windows 95/98(run the ipconfi...
Page 38 - Appendix B: Default Config; User name; Password; admin; IP Address
TD-8840 External ADSL2+ Router User Guide 33 Appendix B: Default Config User name admin Password admin IP Address 192.168.1.1
Page 39 - Appendix C: Contact Information
TD-8840 External ADSL2+ Router User Guide 34 Appendix C: Contact Information For help with the installation or operation of TP-LINK Product, please visit our website. http://www.tp-link.com
