TP-Link DA-500F-HL CU - Manual
TP-Link DA-500F-HL CU – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT SAFETY INSTRUCTIONS; FCC REQUIREMENTS
- Page 3 – SAFETY PRECAUTIONS; Safety Symbol and Message Conventions; WARNING
- Page 4 – When the Unit is in Use; GENERAL DESCRIPTION
- Page 5 – HANDLING PRECAUTIONS; clogged, heat will become trapped inside the enclosure.; INSTALLATION PRECAUTIONS; CAUTION
- Page 6 – NOMENCLATURE AND FUNCTIONS; Lights blue when the power is switched on.; Input level controls; Adjust the input level of each channel.; When a bridge connection is made; • When Channels 1 and 2 are bridge-connected
- Page 7 – Connect speaker cables to these terminals.; • 4-channel input mode; Set both BRIDGE 1 and 2 switches to ON.; Note; Caution when using an XLR type plug
- Page 8 – This terminal is not for protective ground.
- Page 9 – SETTINGS AND CONNECTIONS
- Page 10 – Switch Settings and Speaker Connections
- Page 12 – Connector connections; Loosen the terminal screw, then insert the cable.; Tip; REMOVABLE TERMINAL PLUG CONNECTION; Cautions; • Use cables of AWG 12 – 24.; Cable end treatment
- Page 13 – When a bridge connection is made; Replace the detached top cover.
- Page 14 – CLEANING THE FILTER; Remove the ventilation panel as shown in the figure.; DIMENSIONAL DIAGRAM
- Page 16 – HOW TO USE THE CONTROL/MONITOR TERMINALS; Control voltages are as follows.
- Page 17 – Connection Cable and Maximum Cable Length
- Page 19 – • Accessories
- Page 20 – Rated Output
OPERATING INSTRUCTIONS
MULTICHANNEL POWER AMPLIFIERS
DA-550F CU
DA-500F-HL CU
Thank you for purchasing TOA's Multichannel Power Amplifier.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
1. IMPORTANT SAFETY INSTRUCTIONS
... 2
2. SAFETY PRECAUTIONS
........................... 3
3. GENERAL DESCRIPTION
......................... 4
4. FEATURES
................................................. 4
5. HANDLING PRECAUTIONS
...................... 5
6. INSTALLATION PRECAUTIONS
.............. 5
7. NOMENCLATURE AND FUNCTIONS
Front ............................................................ 6
Rear ............................................................ 7
8. SETTINGS AND CONNECTIONS
............... 9
8.1. Switch Settings and Speaker Connections ... 10
9. REMOVABLE TERMINAL PLUG
CONNECTION
........................................... 12
10. INPUT SENSITIVITY SETTING
................. 13
11. PROTECTION OPERATION LIST
............ 13
12. TAMPER-PROOF CAP ATTACHMENT
... 14
13. CLEANING THE FILTER
.......................... 14
14. DIMENSIONAL DIAGRAM
........................ 14
15. BLOCK DIAGRAMS
15.1. DA-550F ............................................ 15
15.2. DA-500F-HL ...................................... 15
16. HOW TO USE THE CONTROL/MONITOR TERMINALS
16.1. Control Terminal (Input) .................... 16
16.2. Monitor Terminal (Output) ................. 16
16.3. About Pin 7 of the Control/Monitor
Terminals .......................................... 17
16.4. Terminal Pin Arrangement ................ 17
16.5. Connection Cable and
Maximum Cable Length .................... 17
16.6. RJ45 Connector's Pin Arrangement
and Cable Color Codes ..................... 18
17. SPECIFICATIONS
17.1. DA-550F CU ..................................... 19
17.2. DA-500F-HL CU ................................ 20
TABLE OF CONTENTS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 1. IMPORTANT SAFETY INSTRUCTIONS • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer's instruc...
3 When Installing the Unit • Do not expose the unit to rain or an environment where it may be splashed by water or other liquids,as doing so may result in fire or electric shock. • Use the unit only with the voltage specified on the unit. Using a voltage higher than that which isspecified may result...
4 • The unit is designed exclusively to be mounted in a n e q u i p m e n t r a c k . B e s u r e t o f o l l o w t h einstructions below when rack-mounting the unit.Failure to do so may cause a fire or personal injury.· Install the equipment rack on a stable, hard floor. Fix it with anchor bolts or...
