TP-Link 1910010977 - Manual

Easy Smart Configuration Utility User Guide Figure 2-6 InstallShield Wizard Complete 7. The installation process creates a TP-LINK subdirectory under the \Program Files directory on your computer, copies the utility program into the \Program Files\TP-LINK\Easy Smart Configuration Utility directory, ...

Easy Smart Configuration Utility User Guide The discovered switches are listed as below. Figure 2-7 Main Page Click Help in the left bottom to access to the TP-LINK support website for more help. Note: The maximum number of the discovered switches is 30. 2.4 Switch Settings You can select a switch a...

Easy Smart Configuration Utility User Guide The setting figure will shown as below: Figure 2-9 Switch Setting You can configure the switch’s Device Description, DHCP Setting, IP Address, Subnet Mask and Default Gateway on this page. The login User Name and Password are required to complete the confi...

Easy Smart Configuration Utility User Guide Click the icon to save the current configurations. Click the icon to return to the discovering page. Note: The switch you log on to should be in the same subnet with your computer. 2.7 Uninstall the Utility If you want to remove the Easy Smart Configuratio...

Easy Smart Configuration Utility User Guide Figure 2-14 Preparing Setup 3. On the continued screen, click Yes to remove the utility from your PC. Figure 2-15 Uninstall the Utility 4. Click Finish to complete. Figure 2-16 Uninstall Complete Return to CONTENTS 12

Easy Smart Configuration Utility User Guide Chapter 3 System The System module is mainly for system configuration of the switch, including seven submenus: System Info , IP Setting , User Account , Backup and Restore , System Reboot , System Reset and Firmware Upgrade . 3.1 System Info On this page y...

Easy Smart Configuration Utility User Guide 3.2 IP Setting Each device in the network possesses a unique IP address. You can log on to the IP Setting page to operate the switch using this IP address. The switch supports the DCHP mode to obtain an IP address. The IP address obtained using a new mode ...

Easy Smart Configuration Utility User Guide Figure 3-3 System User Setting The following entries are displayed on this screen:  System User Setting User Name: Create a name for administrator’s login. Old Password: Type the old password. Password: Type a new password for administrator’s login. Confi...

Easy Smart Configuration Utility User Guide Choose the menu System → System Reset to load the following page. Figure 3-6 System Reset Note: After the system is reset, the switch will be reset to the default and all the settings will be cleared. 3.7 Firmware Upgrade The switch system can be upgraded ...

Easy Smart Configuration Utility User Guide Chapter 4 Switching Switching module is used to configure the basic functions of the switch, including three submenus: Port Setting , IGMP Snooping and Port Trunk . 4.1 Port Setting On this page, you can configure the basic parameters for the ports. When t...

Easy Smart Configuration Utility User Guide Chapter 5 Monitoring Monitoring module monitors the traffic information of the switch, and provides the convenient method to locate and solve the network problem, includes four submenus: Port Statistics, Port Mirror , Cable Test and Loop Prevention . 5.1 P...

Easy Smart Configuration Utility User Guide Test ALL: Click Test All to carry on the cable test on all ports. Note: The test result is just for your reference. 5.4 Loop Prevention With loop prevention feature enabled, the switch can detect loops using loop detection packets. When a loop is detected,...

Easy Smart Configuration Utility User Guide Chapter 6 VLAN The traditional Ethernet is a data network communication technology based on CSMA/CD (Carrier Sense Multiple Access/Collision Detect) via shared communication medium. Through the traditional Ethernet, the overfull hosts in LAN will result in...

Easy Smart Configuration Utility User Guide The VLAN module is mainly for VLAN configuration, including four submenus: MTU VLAN , Port Based VLAN , 802.1Q VLAN and 802.1Q PVID Setting . 6.1 MTU VLAN On this page you can choose to enable MTU VLAN mode and configure VLANs. Choose the menu VLAN → MTU V...

Easy Smart Configuration Utility User Guide Note: A VLAN cannot be the subset or superset of the other VLANs. 6.3 802.1Q VLAN On this page you can configure 802.1Q VLAN feature and view the related settings. Choose the menu VLAN → 802.1Q VLAN to load the following page. Figure 6-5 802.1Q VLAN Config...

Easy Smart Configuration Utility User Guide Figure 6-6 802.1Q VLAN PVID Setting The following entries are displayed on this screen:  802.1Q VLAN PVID Setting Select: Select the desired port for configuration. It is multi-optional. Port: Displays the port number. PVID: Enter a PVID number for the po...

Easy Smart Configuration Utility User Guide Chapter 7 QoS QoS (Quality of Service) functions to provide different quality of service for various network applications and requirements and optimize the bandwidth resource distribution so as to provide a network service experience of a better quality. ...

Easy Smart Configuration Utility User Guide  Port Based Priority Setting Select: Select the desired port for configuration. It is multi-optional. Port: Displays the port number. Priority Queue: Specify the priority queue the packets from the port are mapped to. The priorities are labeled as 1~4 and...

Easy Smart Configuration Utility User Guide 39 Chapter 8 Help This page contains two submenus: Help and About . 8.1 Help Choose the menu Help → Help to load the following page. Figure 8-1 Help Click Online Help to access to the TP-LINK support website and to the online user guide for the Easy Smart ...