Toyota P0325- User Manual
Toyota P0325– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
A09120
K1
Knock Sensor
ECM
J1
J/C
(Shielded)
KNK1
27
E5
W
1
EB1
W
A
A
BR
ED
1
–
DIAGNOSTICS
ENGINE
DI–71
2000 CELICA (RM744U)
DTC
P0325
Knock Sensor 1 Circuit Malfunction
CIRCUIT DESCRIPTION
The knock sensor is fitted to the cylinder block to detect engine knocking. This sensor contains a piezoelec-
tric element which generates a voltage when it becomes deformed, which occurs when the cylinder block
vibrates due to knocking. If engine knocking occurs, ignition timing is retarded to suppress it.
DTC No.
DTC Detecting Condition
Trouble Area
P0325
No knock sensor 1 signal to ECM with engine speed, 2,000
rpm or more
S
Open or short in knock sensor 1 circuit
S
Knock sensor 1 (looseness)
S
ECM
HINT:
If the ECM detects above diagnosis conditions, it operates the fail safe function in which the corrective retard
angle value is set to the maximum value.
WIRING DIAGRAM
INSPECTION PROCEDURE
HINT:
Read freeze frame data using TOYOTA hand–held tester or OBD II scan tool. Because freeze frame records
the engine conditions when the malfunction is detected, when troubleshooting it is useful for determining
whether the vehicle was running or stopped, the engine warmed up or not, the air–fuel ratio lean or rich, etc.
at the time of the malfunction.
DI38A–03
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
