Page 2 - SAFETY PRECAUTIONS; Before Using
Before Using 3 2 SAFETY PRECAUTIONS Before Using The lightning flash with arrowhead symbol, within an equilateral triangle, is intendedto alert the user to the presence of uninsulated "dangerous voltage" within the product'senclosure that may be of sufficient magnitude to constitute a risk o...
Page 3 - IMPORTANT SAFETY INSTRUCTIONS; CAUTION: P L E A S E R E A D A N D O B S E R V E A L L WA R N I N G S A N D
Before Using 5 4 5. Heat The product should be situatedaway from heat sources such asradiators, heat registers, stoves, orother products (includingamplifiers) that produce heat. 6. Water and Moisture Do not use this product near water.- for example, near a bath tub,wash bowl, kitchen sink, or laundr...
Page 4 - Damage Requiring Service; Object and Liquid Entry
Before Using 7 6 IMPORTANT SAFETY INSTRUCTIONS (Continued) 15. Accessories Do not place this product on anunstable cart, stand, tripod,bracket, or table. The product mayfall, causing serious injury to achild or adult, and serious damageto the product. A product and cartcombination should be moved wi...
Page 5 - IMPORTANT PRECAUTIONS; Save Original Packing Materials; POWER SUPPLY CORD SELECTION; Replacement Parts; IMPORTANT SAFETY INSTRUCTIONS (Continued); Do not use the product in
Before Using 8 9 If your line voltage is 220 to 240V, use one of the following types of cable. Plugconfiguration Plug type Australian240V10A North American240V15A Switzerland240V6A Line voltage EURO UK 220 – 240V 220 – 240V 200 – 240V 200 – 240V 200 – 240V Plugconfiguration Plug type Line voltage Us...
Page 6 - EXEMPTION CLAUSES; REMOTE CONTROL BATTERIES
Before Using 10 11 Avoid Volatile Liquid Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber orplastic products touching the unit for a long time. They will leave marks on the finish.If cleaning with a chemically saturated cloth, be sure to follow the product's p...
Page 7 - CONTENTS
Before Using 13 12 CONTENTS Before Using SAFETY PRECAUTIONS .................................................................................. 2 IMPORTANT SAFETY INSTRUCTIONS ........................................................... 4 POWER SUPPLY CORD SELECTION ......................................
Page 8 - Installing Acrobat; Viewing the manual; Checking the package contents; Preparations; Names of each part on the main unit
15 14 Preparations ◆ The Supplied CD-ROM The supplied CD-ROM contains an owner’s manual, including information not available forthe printed Owner’s manual (Getting started) and Acrobat ® Reader™ to view the manual. ■ Installing Acrobat ® Reader™ (Not necessary if Acrobat ® Reader™ has already been i...
Page 9 - Names of each part on the control panel and remote control; Remote control
17 16 Preparations Names of each part on the control panel and remote control Control panel Remote Control Name : Main Function Control panel (1) ENTER button : Accepts the selected mode. (2) MENU button : Displays menus. p.34 (3) KEYSTONE button : Adjusts keystone distortion. p.27 (4) ON/STANDBY bu...
Page 10 - Remove the battery cover.; The remote control; Preparing and using the remote control
19 18 Preparations ■ Operating the remotecontrol Point toward the projector’sinfrared remote sensor, and press abutton on the remote control. • Operating the projector from the front Approx. 15 ° Approx. 5m ■ Loading dry-cell batteriesinto the remote control q Remove the battery cover. w Insert the ...
Page 11 - Before connection; Connection; Placement Styles; Placement; WARNING; Projection Distance and Size
21 20 Preparations p.53 Video recorder, DVD player, etc. To audio outputWhite (L)/Red (R) S-video cable(not supplied) To S-video output Before connection • Read the owner’s manual of the device you are connecting to the projector.• Some types of computer cannot be used or connected to this projector...
Page 12 - Turning the power on and off; Operations; Connecting the power cord; CAUTION; Notes
23 Operations 22 Turning the power on and off Operations ■ Connecting the power cord 1 Insert the power cord connector intothe AC IN socket of the projector. 2 Insert the power cord plug into awall or other power outlet. The ON/STANDBY indicator willchange to orange, indicating standbymode. ■ Removi...
Page 13 - Select the language and the lamp power (When using the; Basic operations; Turning the power off
25 Operations 24 1 Turn on the power. Turn on the power by following the instructions in “ Turning the power on ” p.23 . 2 Select the language and the lamp power (When using the first time). When the projector is used for the first time after purchase, the start menu for lan-guage (to display the me...
Page 14 - Using handy features
27 Operations 26 ■ Using auto setting (Only for input from computer) This function sets up the projector to the optimum state such assampling phase, frequency, screen position, and clamp for eachtype of the input signal by using simple operations. Press the remote control’s AUTO SET button. For comp...
Page 15 - Cutting off the picture and sound temporarily (Mute)
29 Operations 28 Notes • The icon appears while resizing. • Operating a function other than Mute will release resizing.• As zooming is processed digitally, the image quality is degraded in larger zoom ratio. • During resizing or moving the zooming area, the image may be distorted. ■ Cutting off the ...
Page 16 - Setting the password
31 Operations 30 ■ Setting the password How to change password The default password is 0000 . 1 Select [Password] in the Default setting 2 menu and press the or button. 2 Select [Password registration] in the password registration, settingmenu, and press the button. The password entry screen is disp...
Page 18 - The image adjustment menu; How to use the menus; Using the menus; Press the MENU button.
35 Operations 34 ■ The image adjustment menu Use this menu to set or adjust image-related items. Items that can be set or adjusted aremarked with “Yes”, and those that cannot are marked with “No”. (When an item is masked,it indicates that you cannot select for the current input.) Item Description Co...
Page 19 - The display setting menu; Detailed description
37 Operations 36 ■ The display setting menu Use this menu to set screen display-related items.(The items in gray color cannot be set with the current input selection.) Language Up/down shift Background Icon Blackboard mode Start-up screen User logo (Full): Display with 1024 × 768 dot resolution (Thr...
Page 21 - The default setting menu; Default setting 1 menu; Default setting 2 menu
41 Operations 40 ■ The default setting menu This menu shows placement status and other settings. Default setting 1 menu Description Item Set the time to wait for the power to be turned off after the last operation is made with no input signal. Set whether the input with signals is only selected or n...
Page 22 - Immediately replace the lamp when a sign appears on the screen.; About lamp; Maintenance
42 43 Maintenance The product’s light source is a mercury lamp that lights at increased internal pressure. Be sureto fully understand the following characteristics of the lamp and handle it with extreme care. • The lamp may burst with a loud noise due to impact or deterioration, or fail to light at ...
Page 23 - Replace the lamp cover.; Notes and Precautions; Wait until lamp is sufficiently cooled.; Lamp replacement; About lamp replacement messages
45 Maintenance 44 5 Mount the new lamp. Align the orientation, press down the new lampuntil the bottom is reached, and lock in place usingthe three lamp locking screws. 6 Replace the lamp cover. Align the cover, and press it in, then tighten thescrews loosened in step 3 until the lamp cover is no lo...
Page 24 - Lens and main unit cleaning
47 Maintenance 46 WARNING • Request cleaning and maintenance of a ceiling-mounted unit from your projector dealership. Attempting to clean/replace the lamp at a high site by yourself may cause you to falldown, thus resulting in injury. ■ Lens cleaning • Clean the lens with a commercially available b...
Page 25 - Before calling service personnel; Trouble indications; Others
49 Others 48 If you think something is wrong, check the followings before contacting customer service.Please see “ Trouble indications ” p.48 as well. If This Happens Check No power Power goes outduring use No picture No audio Picture notdisplayedcorrectly Picture blurredPart of pictureout of focus ...
Page 26 - Specifications; List of general specifications
51 Others 50 ■ List of supported signals (RGB signals) This projector supports the following RGB signals. Note, however, that depending on thecomputer model, the screen may show flicker or streaking. Please adjust the projector ifthis happens. Resolution 720 x 400640 x 480 800 x 600 832 x 624 1024 x...
Page 27 - CONTROL terminal; Pin assignment; Separately sold product
53 Others 52 Specifications (Continued) ■ CONTROL terminal ● Pin assignment 7 6 8 5 4 3 2 1 Signal Name RXD CTS DSR GND RTS N.C TXD GND Pin No. 12345678 Description Receiving dataConsent to sendData set readySignal groundRequest to sendNo connectionSending dataSignal ground Mini DIN 8 pin connector ...
