Toshiba 50L5200U - Manuals

10 Con t en t s Connecting DVD player with Color S tream ® & satellite receiver ............................................26 Connecting an HDMI® or DVI device to the HDMI® input .................................................................29 HDMI® CEC connection ..............................

11 Con t en t s Tuning channels using the Channel Browser ..........65 Favorites browser .............................................66Elements of the Channel Browser .....................67Adding and clearing channels and inputs in the History List ....................................................

12 Con t en t s S electing stereo/ S AP broadcasts ......................85 Adjusting the audio quality................................86Audyssey Premium Television™ .......................87Audyssey ABX™ ...............................................87Using Dynamic Volume (Audyssey Dynamic Volume®...

13 Con t en t s No S ignal Power Down .........................................110 Using HDMI® CEC................................................111 HDMI® CEC playback device (DVD player, etc.) control ......................................................111 Other HDMI® CEC functions ................

15 Chap t e r 1 Introduction Safe t y icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk...

16 In tr oduc t ion Features Fea t u r es The following are just a few of the many exciting features of your new Toshiba wide screen, integrated HD, LED TV: ❖ Integrated digital tuning (8VSB ATSC and QAM) — Eliminates the need for a separate digital converter set-top box (in most cases). ❖ 1366 x 76...

17 In tr oduc t ion Overview of installation, setup, and use Ove r view of ins t alla t ion, se t up, and use Follow these steps to set up your TV and begin using its many exciting features. 1 Carefully read the important safety, installation, care, and service information. Keep this manual for futu...

18 In tr oduc t ion TV front and side panel controls and connections 10 Program channels into the TV’s channel memory, see “Auto Tuning” on page 52 . 11 For details on using the TV’s features, see chapters 6 and 7. 12 For help, refer to “Troubleshooting” on page 122 . 13 For technical specifications...

19 In tr oduc t ion TV back panel connections 3 POWER —Turns the TV On/Off . If the TV stops responding to the buttons on the remote control or TV control panel and you cannot turn off the TV, press and hold the POWER button on the TV control panel for a few seconds to reset the TV. 4 ARROWS / / / —...

20 In tr oduc t ion TV back panel connections device. HDMI ® connection is necessary to receive 1080p signals. 3 PC/HDMI-1 (Audio) IN —PC audio input terminal is shared with an HDMI-1 analog audio input terminal, and its use can be configured in the Audio Setup menu, see “Setting the PC Audio” on pa...

21 In tr oduc t ion TV back panel connections 2 Digital AUDIO OUT —Optical audio output in Dolby® Digital or PCM (pulse-code modulation) format for connecting an external Dolby Digital decoder, amplifier, or home theater system with optical audio input. 3 ANALOG AUDIO OUT —Analog audio outputs for c...

22 Chap t e r 2 Connecting Your TV Ove r view of cable t ypes Before purchasing cables, know the connector types your devices require. You can purchase cables from most stores that sell audio/video devices. Coaxial (F- t ype) cable (Sample Illustration) Coaxial cable Coaxial (F-type) cable connects ...

23 Connec t ing You r TV Overview of cable types S t anda r d A/V cables ( r ed/whi t e/yellow) (Sample Illustration) Standard AV cables Standard A/V cables (composite video) usually come in sets of three, and connects to video devices with analog audio and composite video output. These cables (and ...

24 Connec t ing You r TV Overview of cable types HDMI ® cables provide the best audio and picture quality. Op t ical audio cable (Sample Illustration) Optical audio cable Optical audio cable connects receivers with Dolby ® Digital or PCM (pulse-code modulation) optical audio input to the TV’s Digita...

25 Connec t ing You r TV Connecting a VCR, antenna, cable TV, or camcorder Connec t ing a VCR, an t enna, cable TV, o r camco r de r (Sample Illustration) L4200U Series—Connecting to a VCR, antenna, or cable TV or camcorder (Sample Illustration) L5200U Series—Connecting to a VCR, antenna, or cable T...

26 Connec t ing You r TV Connecting DVD player with ColorStream ® & satellite receiver When you use a cable box, you may not be able to use the remote control to program or access certain features on the TV. When you use ColorStream ® HD or Video, switch AV input mode appropriately. To view the ...

27 Connec t ing You r TV Connecting DVD player with ColorStream ® & satellite receiver ColorStream ® and composite video cables cannot be connected simultaneously. (Sample Illustration) L5200U Series—Satellite receiver with component video or DVD player with component video Items needed: ❖ Coaxi...

28 Connec t ing You r TV Connecting DVD player with ColorStream ® & satellite receiver ❖ If your DVD player or satellite receiver does not have component video, connect a standard A/V cable to the AUDIO/VIDEO terminal. If your DVD player has HDMI ® video, see “Connecting an HDMI® or DVI device t...

29 Connec t ing You r TV Connecting an HDMI® or DVI device to the HDMI® input Connec t ing an HDMI ® o r DVI device t o t he HDMI ® inpu t The HDMI ® input on your TV receives digital audio and uncompressed digital video from an HDMI ® source device, or uncompressed digital video from a DVI (Digital...

30 Connec t ing You r TV Connecting an HDMI® or DVI device to the HDMI® input (Sample Illustration) L5200U Series—HDMI ® connections To view the HDMI ® device video: Select HDMI 1 , HDMI 2 , or HDMI 3 (for L5200U Series) video input source on the TV. (Press the INPUT button on the remote control. Fo...

31 Connec t ing You r TV Connecting an HDMI® or DVI device to the HDMI® input For more information, see “Setting the HDMI® audio mode” on page 56 (Sample Illustration) L4200U Series—DVI connections (Sample Illustration) L5200U Series—DVI connections TV back panel Playback device TV back panel Playba...

32 Connec t ing You r TV HDMI® CEC connection To ensure that the HDMI ® or DVI device is reset properly: ❖ When turning on your electronic components, turn on the TV first, and then the HDMI ® or DVI device. ❖ When turning off your electronic components, turn off the HDMI ® or DVI device first, and ...

33 Connec t ing You r TV HDMI® CEC connection (Sample Illustration) L5200U Series—HDMI® CEC compatible audio receiver and playback device connections To connect an HDMI ® device, you will need one HDMI ® cable (type A connector) per HDMI ® device (see “Overview of cable types” on page 22 ). ❖ If sev...

34 Connec t ing You r TV Connecting a digital audio system Connec t ing a digi t al audio sys t em The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby ® Digital or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby Digital decoder or other external audio system wi...

35 Connec t ing You r TV Connecting a digital audio system 4 Press the ( / arrow) buttons to select Digital Output Format . 5 Press the ( / arrow) buttons to select either Dolby Digital or PCM , depending on your device, see “Audyssey Premium Television™” on page 87 . (Sample Image) Audio Setup scre...

36 Connec t ing You r TV Connecting an analog audio system Connec t ing an analog audio sys t em This connection allows you to use external speaker with an external analog audio amplifier to adjust the level. You will need standard audio cables. (Sample Illustration) L4200/L5200U Series—Connecting a...

37 Connec t ing You r TV Connecting a computer (Sample Illustration) L4200U Series Computer connections (Sample Illustration) L5200U Series Computer connections Computer PC audio output PC audio cable TV back panel Conversion adaptor (if necessary) TV back panel PC audio cable PC audio output Comput...

38 Connec t ing You r TV Connecting a computer To use a computer, set the monitor output resolution on the computer before connecting it to the TV. The supported signal formats are VGA, SVGA, XGA, WXGA and SXGA. For detailed signal specifications, see “Acceptable signal formats for PC IN, HDMI®” on ...

39 Connec t ing You r TV Connecting a computer (Sample Illustration) L4200U Series Connections to HDMI ® terminal (Sample Illustration) L5200U Series Connections to HDMI ® terminal TV back panel PC audio cable PC audio output HDMI ® to DVI adapter cable Computer TV back panel PC audio cable PC audio...

40 Connec t ing You r TV Connecting a computer The supported signal formats are VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz). For signal specifications, see “Acceptable signal formats for PC IN, HDMI®” on page 132 . ❖ The edges of the picture...

41 Chap t e r 3 Using the Remote Control Ins t alling ba tt e r ies To install batteries: 1 Remove the battery cover from the back of the remote control. (Sample Illustration) Removing the remote back cover 2 Insert two AAA batteries, corresponding to the (+) and (-) markings on the battery compartm...

42 Using t he Remo t e Con tr ol Remote control effective range ❖ Be sure to use AAA size batteries. ❖ Dispose of batteries in a designated disposal area. ❖ Always consider the environment when disposing of batteries. Always follow applicable laws and regulations. ❖ If the remote does not operate co...

43 Using t he Remo t e Con tr ol Learning about the remote control Lea r ning abou t t he r emo t e con tr ol The buttons used for operating the TV are described below. For the HDMI® CEC remote control functions, see “HDMI® CEC playback device (DVD player, etc.) control” on page 111 . (Sample Illust...

45 Using t he Remo t e Con tr ol Learning about the remote control 18 The Arrow buttons ( / / / ) select or adjust programming menus when a menu is on-screen. 19 The Arrow buttons ( / ) open the Channel Browser and tune to the previous/next channel in the channel history when TV programming is on-sc...

46 Chap t e r 4 Menu Layout and Navigation Main menu layou t The tables below and on the next pages provide a quick overview of your TV’s menu system. To open the Installation menus (illustrated below), press MENU on the remote control or TV control panel. Icon Item Option Picture Mode Dynamic/Stand...

47 Menu Layou t and Naviga t ion Main menu layout Preferences CC Selector Launches the temporary CC Selector Base CC Mode Off/CC1/CC2/CC3/CC4/T1/T2/T3/T4 Digital CC Settings Opens the Digital CC Setup menu Input Labeling Opens the Input Labeling menu AV Input Selects ColorStream HD/Video input Menu ...

48 Menu Layou t and Naviga t ion Setup/Installation menu layout Se t up/Ins t alla t ion menu layou t The Installation menu contains the Terrestrial and System Status menus. To open the Installation menu, press the MENU button on the remote control or TV control panel, open the Setup menu, select In...

49 Menu Layou t and Naviga t ion Navigating the menu system 3 Press the ENTER button to save your menu settings or select a highlighted item. A highlighted menu item appears in a different color in the menu. 4 All menus close automatically if you do not make a selection within approximately 60 secon...

50 Chap t e r 5 S etting up your TV Ini t ial Se t up When you first turn on or reset the TV, the Initial Setup window will appear. 1 In the Menu Language field, press the ( / arrow) buttons to select your preferred language. 2 Press the ( / arrow) buttons to select Time Zone Setup . Then set your d...

51 Se tt ing up you r TV Initial Setup Menu language You can choose from three different menu language settings (English, Français, and Español) for the on-screen display of menus and messages. To select the menu language: 1 Press the MENU button and open the Preferences menu, and highlight Menu Lan...

52 Se tt ing up you r TV Storing channels in memory (optional) 3 Open the Terrestrial menu, highlight Input Configuration , and then press the ENTER button. (Sample Image) Terrestrial menu - Input Configuration selection 4 Highlight ANT/CABLE In and press the ( / arrow) buttons to select the input s...

53 Se tt ing up you r TV Storing channels in memory (optional) ❖ You must set up the ANT/CABLE input source before programming channels. See “ANT/CABLE IN” on page 51 . ❖ The automatic channel programming process will erase channels that were previously programmed into the TV’s memory. ❖ To tune the...

54 Se tt ing up you r TV Storing channels in memory (optional) A new set of Installation menu icons appears. 4 Open the Terrestrial menu, highlight Channel Program to open the Start Scan window, and then press the ENTER button to begin channel programming. (Sample Image) Terrestrial menu - Channel P...

55 Se tt ing up you r TV Setting channel skip Se tt ing channel skip To prevent a channel from being viewed, you can set it to be skipped. 1 From the Setup menu, highlight Installation , and then press the ENTER button. 2 Press the ( / arrow) buttons to select Channel Options , and then press the EN...

56 Se tt ing up you r TV Setting the AV input mode Skipped channels cannot be selected with the CH arrow buttons; however, they can be accessed using the number keys on the remote control. If an encrypted channel is accidentally added to the channel list while programming channels, you can remove th...

57 Se tt ing up you r TV Viewing the digital signal meter mode.) See “Connecting an HDMI® or DVI device to the HDMI® input” on page 29 . (Sample Image) HDMI ® Audio mode selection 4 To save the setting, highlight Done , and then press the ENTER button. Because the PC and HDMI 1 inputs share the same...

58 Se tt ing up you r TV Setting the time zone 2 Highlight Installation , and then press the ENTER button. A new set of Installation menu icons appears. 3 Open the Terrestrial menu, highlight Signal Meter , and then press the ENTER button. 4 Press the ( / / / arrow) buttons to select the antenna inp...

59 Se tt ing up you r TV Viewing the system status 3 Open the System Status menu, highlight System Information , and then press the ENTER button. 4 Press the ( / arrow) buttons to scroll through the menu bar to select Factory Defaults or Support Information . The related information appears. To clos...

60 Chap t e r 6 Using the TV’s features Selec t ing t he video inpu t sou r ce To select the video input source to view: 1 Press the INPUT button on the remote control or TV control panel. 2 Do one of the following: ❖ Press 0-4 (L4200U Series) or 0-5 (L5200U Series). ❖ Repeatedly press the ( / arrow...

61 Using t he TV’s fea t u r es Selecting the video input source ❖ Repeatedly press the INPUT button on the remote control or TV control panel to change the input setting. The current signal source displays in the top right corner of the Input Selection screen. (Sample Image) L4200U Series Input Sel...

62 Using t he TV’s fea t u r es Labeling the video input sources If a HDMI® CEC device with HDMI ® switching capability (e.g. Audio Receiver) is connected to the HDMI ® input, press the INPUT button on the remote control or TV control panel repeatedly to highlight HDMI 1 or HDMI 2 . If the connected...

63 Using t he TV’s fea t u r es Labeling the video input sources ❖ Video Recorder ❖ Hide (to hide an unused input in the Input Selection screen and in the Channel Browser Inputs list) If you select PC in the Input Selection screen, you can choose only “– –”, “Game Console”, or “Hide” as the label. T...

65 Using t he TV’s fea t u r es Tuning channels using the Channel Browser Tuning channels using t he Channel B r owse r The Channel Browser provides an easy navigation interface for all your channels and inputs. This feature allows you to: ❖ Navigate and select entries. ❖ Keep a list of your favorit...

66 Using t he TV’s fea t u r es Tuning channels using the Channel Browser Favo r i t es b r owse r The Favorites Browser allows you to quickly set up a favorite channels/inputs list that is integrated into the Channel Browser. To add a favorite channel/input: 1 Tune to the channel or input. 2 Press ...

67 Using t he TV’s fea t u r es Tuning channels using the Channel Browser 5 Press the ( arrow) button to highlight Inputs List , and then press the ( / arrow) buttons to select On or Off . 6 Press the ( arrow) button to highlight Favorites List , and then press the ( / arrow) buttons to select On or...

69 Using t he TV’s fea t u r es Tuning channels using the Channel Browser Adding and clea r ing channels and inpu t s in t he His t o r y Lis t As a channel or input is tuned, the Channel Browser adds it to the History List and displays it on the right side of the Channel Browser. Previously tuned c...

70 Using t he TV’s fea t u r es Tuning channels using the Channel Browser Tuning t o a specific channel (p r og r ammed o r unp r og r ammed) To tune analog channels: Press the Channel Number (0–9) on the remote control. For example, to select channel 125, press 1, 2, 5, and then press the ENTER but...

71 Using t he TV’s fea t u r es Selecting the picture size 2 Press and hold the CH RTN button for a few seconds until the message “Memorized” appears on the screen. The channel has been programmed to the CH RTN button. 3 You can then change channels repeatedly, and when you press the CH RTN button, ...

72 Using t he TV’s fea t u r es Selecting the picture size To select the picture size using the menus: 1 Select Picture Size in the Theater Settings menu. 2 Press the ( / arrow) buttons to select the desired picture size setting. 3 Highlight Done , and then press the ENTER button. Some of the pictur...

73 Using t he TV’s fea t u r es Selecting the picture size The Full setting is for viewing in 1080i, 1080p, and 720p program source. (Sample Illustration) Picture size - Full The edges of the picture may be hidden. Thea t e r Wide 1 This setting is for viewing in 4:3 format programs. (Sample Illustr...

74 Using t he TV’s fea t u r es Selecting the picture size Thea t e r Wide 3 This setting is for viewing letter box programs with subtitles. (Sample Illustration) Picture size - TheaterWide 3, letter box with subtitles The picture’s top and bottom edges are hidden*. * To view the hidden areas (such ...

75 Using t he TV’s fea t u r es Selecting the picture size 4:3 (Sample Illustration) Picture size - 4:3 Some program formats will display with sidebars and/or bars at the top and bottom. No r mal This setting is for viewing VGA, SVGA, XGA, WXGA, and SXGA sources. (Sample Illustration) Picture size -...

76 Using t he TV’s fea t u r es Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only) Sc r olling t he Thea t e r Wide ® pic t u r e (Thea t e r Wide 2 and 3 only) You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 modes for each input. To set the scroll settings: 1...

77 Using t he TV’s fea t u r es Using the Auto Aspect feature Using t he Au t o Aspec t fea t u r e When this feature is set to On, the TV will automatically select the picture size when one of the following input sources is received: ❖ A 480i, 480p, 720p, 1080i digital signal from the ANT/CABLE inp...

78 Using t he TV’s fea t u r es Selecting the cinema mode Selec t ing t he cinema mode When you view a DVD (3:2 pulldown processed) from a DVD player connected to the VIDEO , ColorStream ® HD (component video), or HDMI ® inputs on the TV, smoother motion can be obtained by setting the Cinema Mode to...

79 Using t he TV’s fea t u r es Adjusting the picture Adjus t ing t he pic t u r e Selec t ing t he pic t u r e mode You can select your desired picture settings from the modes described below. PC mode is available for HDMI ® and PC inputs only (grayed out for other input sources). To select the pic...

80 Using t he TV’s fea t u r es Adjusting the picture 3 Press the ( / arrow) buttons to select the picture mode you prefer, and then press the ENTER button. (Sample Image) Mode selections screen Adjus t ing t he pic t u r e quali t y You can adjust the picture quality (Contrast, Backlight, DynaLight...

81 Using t he TV’s fea t u r es Using closed captions 3 Press the ( / arrow) buttons to select the picture quality you wish to adjust (Contrast, Backlight, DynaLight, Brightness, Color, Tint, or Sharpness), and then press the ( / arrow) buttons to adjust the setting. 4 To save the new settings, high...

82 Using t he TV’s fea t u r es Using closed captions If the program or video you selected is not closed captioned, no captions will display onscreen. To view text, highlight T1 , T2 , T3 , or T4 . (Sample Illustration) Captions - text If text is not available in your area, a black rectangle may app...

83 Using t he TV’s fea t u r es Using closed captions 3 Press the ( / arrow) buttons to highlight the characteristic you wish to change, and then press the ( / arrow) buttons to select the format for that characteristic. 4 To save the new settings, highlight Done , and then press the ENTER button. T...

84 Using t he TV’s fea t u r es Adjusting the audio 4 To save the new settings, highlight Done , and then press the ENTER button. 5 Press the EXIT button. Adjus t ing t he audio Mu t ing t he sound Press the MUTE button to partially reduce (1/2 Mute) or turn off (Mute) the sound. Each time you press...

85 Using t he TV’s fea t u r es Adjusting the audio 2 Highlight Digital Audio Selector , and then press the ENTER button. (Sample Image) Sound menu - Digital Audio Selector selection 3 Press the ( / arrow) buttons to select Audio , and then press the ( / arrow) buttons to select the desired service....

87 Using t he TV’s fea t u r es Adjusting the audio Audyssey P r emium Television™ These televisions use a suite of technologies for better sound including: ❖ Audyssey EQ ® —provides clear, accurate and natural sound right out of the box. This technology ensures you enjoy your audio experience as mu...

88 Using t he TV’s fea t u r es Adjusting the audio When you use ColorStream ® HD or Video, switch the AV input mode appropriately. Selec t ing t he op t ical audio ou t pu t fo r ma t You can select the optical audio output format when you connect a Dolby ® Digital decoder or other digital audio sy...

89 Using t he TV’s fea t u r es Using the Locks menu Using t he Locks menu The Locks menu includes the Enable Rating Blocking, Edit Rating Limits, Input Lock, Panel Lock, GameTimer and New PIN Code features. You can use these features after entering the correct PIN code. En t e r ing t he PIN code 1...

90 Using t he TV’s fea t u r es Using parental controls (for USA region) ❖ Use the Number buttons to enter your four-digit code, and then press the ENTER button. If the wrong PIN code is entered, the message “Incorrect PIN code, please try again!” appears. ❖ Highlight Retry , and then press the ENTE...

91 Using t he TV’s fea t u r es Using parental controls (for USA region) 1 Press the MENU button and highlight the Locks menu icon. 2 Press the ( arrow) button to display the PIN code entering screen. 3 Enter your four-digit PIN code, and then press the ENTER button. 4 Press the ( arrow) button to h...

93 Using t he TV’s fea t u r es Using parental controls (for USA region) To download the additional rating system, if available: 1 Press the MENU button and highlight the Locks menu icon. 2 Press the ( arrow) button to display the PIN code entering screen. 3 Enter your four-digit PIN code, and then ...

94 Using t he TV’s fea t u r es Using parental controls (for USA region) ❖ The additional rating system can only be downloaded one time. You will not be able to download any updates to the rating system should such updates become available. ❖ The additional rating system is not designed, transmitted...

95 Using t he TV’s fea t u r es Using parental controls (for USA region) Independent rating system for movies: Indication other than rating system: If you place an “X” in the box next to “None” Rated, programs rated “None” or “Not Rated” will be blocked; Programs that do not provide any rating infor...

97 Using t he TV’s fea t u r es Using the input lock feature Unlocking p r og r ams t empo r a r ily If you try to tune to a program that exceeds the rating limits you have set, the TV will enter program lock mode and a warning message appears on the screen. (Sample Illustration) Warning - exceeded ...

98 Using t he TV’s fea t u r es Locking channels Locking channels With the Lock feature, you can lock specific channels. Locked channels can only be accessed by entering the PIN code, see “Entering the PIN code” on page 89 . To lock channels: 1 From the Setup menu, highlight Installation , and then ...

99 Using t he TV’s fea t u r es Locking channels Using t he GameTime r ® You can use the GameTimer ® to set a time limit for playing a video game (30–120 minutes). When the GameTimer ® expires, the TV enters Input Lock mode and locks out the input source for the video game device. To set the GameTim...

100 Using t he TV’s fea t u r es Using the PC settings feature 5 Press the ( arrow) button to select On . When the control panel is locked and any button on the control panel (except POWER) is pressed, the message “NOT AVAILABLE” appears. (Sample Illustration) Locks menu - Panel Lock selection To un...

101 Using t he TV’s fea t u r es Using the PC settings feature If a computer is not connected or there is no PC input signal, this feature will be grayed out in the Setup menu. 4 Press the ( / arrow) buttons to select an item. 5 Press the ( / arrow) buttons to make the appropriate adjustments. (Samp...

102 Using t he TV’s fea t u r es Using the Media Player 2 Highlight Audio Setup , and then press the ENTER button. 3 Press the ( / arrow) buttons to select PC Audio , and then press the ( / arrow) buttons to select No or Yes . ❖ Yes: When viewing the PC input, the audio from the PC Audio input can b...

103 Using t he TV’s fea t u r es Using the Media Player ❖ Gently insert the USB device into the port and do not remove while viewing Media Player. ❖ USB device: USB Mass Storage Class device (MSC) ❖ Connectivity is not guaranteed for all devices. ❖ Connect the USB device to the TV directly. ❖ Do not...

104 Using t he TV’s fea t u r es Using the Media Player If you repeatedly insert and remove the USB connector, the prompt may not appear. 2 Press the ( / arrow) buttons to select Yes , and then press the ENTER button. The Media Player menu appears. (If you select No, nothing happens.) (Sample Image)...

105 Using t he TV’s fea t u r es Using the Media Player Viewing pho t o files There are three types of view modes, multi view, single view, and slide show. Mul t i View This view allows you to search for photos in a grid format. These pictures are displayed using thumbnail data in each image file. (...

106 Using t he TV’s fea t u r es Using the Media Player ❖ Press to rotate the image 90° counterclockwise. Press to rotate the image 90° clockwise. Slide show This view allows you to watch a slide show of the photos. In this mode, only files located in the selected directory will be played. To use sl...

108 Using t he TV’s fea t u r es Using the Media Player 3 Select a music file and press the ENTER button to start playback. 4 Press CH RTN twice to move back to photo view mode. The music is now playing in the background. So rt ing pho t o o r music files From the photos Multi View or from the music...

109 Using t he TV’s fea t u r es Setting the sleep timer During playback, you can adjust the SOUND menu functions from the Quick Menu. Sorting, Total Time display may not be available in all cases. Se tt ing t he sleep t ime r You can set the sleep timer to turn off the TV after a set length of time...

110 Using t he TV’s fea t u r es Automatic Power Down To display the time remaining until the TV turns off, press the SLEEP button. To cancel the sleep timer, repeatedly press SLEEP until it is set to 0 minutes. Au t oma t ic Powe r Down The TV can be configured to automatically turn itself off afte...

111 Using t he TV’s fea t u r es Using HDMI® CEC 3 Press the ( / arrow) buttons to highlight the item you want to change, and press the ( / arrow) buttons to select On or Off . ❖ Default setting for this feature is On. ❖ A warning message will appear 1 minute before the TV turns off. Using HDMI® CEC...

112 Using t he TV’s fea t u r es Using HDMI® CEC HDMI® CEC Playe r Con tr ol menu func t ions To control the HDMI® CEC player from the menu: 1 Press MENU and open the Preferences menu. 2 Highlight HDMI® CEC Player Control and press the ENTER button. (Sample Image) Preferences menu - HDMI® CEC Player...

113 Using t he TV’s fea t u r es Using HDMI® CEC HDMI® CEC inpu t sou r ce selec t ion If a HDMI® CEC device with HDMI ® switching capability (e.g. Audio Receiver) is connected to the HDMI ® input, you can select another HDMI® CEC device that is connected to the master HDMI ® device using the TV’s I...

114 Using t he TV’s fea t u r es Displaying TV status information When you turn on the Audio Receiver, change its input source or adjust the sound volume, the sound will be output from the audio receiver’s speakers even if TV Speakers has been selected. Turn the TV off and on again to output the sou...

115 Using t he TV’s fea t u r es Understanding the last mode memory feature ❖ Digital signal strength indicator (bar graph in lower right corner of box; for ATSC signals only) ❖ Stereo, Mono, or SAP audio status (when in HDMI ® input mode, Dolby Digital, or PCM) ❖ Video resolution ❖ Aspect ratio of ...

116 Chap t e r 7 Using the TV’s Advanced Features Using t he advanced pic t u r e se tt ings Dynamic Con tr as t Dynamic Contrast detects changes in picture quality that affect the appearance of your contrast settings and then automatically adjusts the video. To select Dynamic Contrast preference: 1...

117 Using t he TV’s Advanced Fea t u r es Using the advanced picture settings 4 Press the ( / arrow) buttons to select High , Middle , Low or Off . S t a t ic Gamma The static gamma feature lets you adjust the levels of black in the picture. To adjust the static gamma settings: 1 Press the MENU butt...

118 Using t he TV’s Advanced Fea t u r es Using the advanced picture settings To select the color temperature: 1 Press the MENU button and open the Picture menu. 2 Highlight Picture Settings , and then press the ENTER button. 3 Highlight Advanced Picture Settings , and then press the ENTER button. 4...

119 Using t he TV’s Advanced Fea t u r es Using the advanced picture settings 3 Highlight Advanced Picture Settings and press the ENTER button. 4 In the ClearFrame field, select On . 5 To save the new settings, highlight Done and press the ENTER button. To revert to the factory defaults, highlight R...

120 Using t he TV’s Advanced Fea t u r es Using the advanced picture settings CableClea r ® digi t al Noise Reduc t ion The CableClear ® digital Noise Reduction feature allows you to reduce visible interference in your TV picture. This may be useful when receiving a broadcast with a weak signal (esp...

121 Using t he TV’s Advanced Fea t u r es Using the advanced picture settings Game Mode You can use the Game Mode feature for shorter frame delays when you need split-second timing between the on-screen display and input from the controller (such as music creation and high-action games). This featur...

122 Chap t e r 8 Troubleshooting Gene r al tr oubleshoo t ing Before calling a service technician, review this chapter or visit the Toshiba technical support Web site at support.toshiba.com for possible causes/solutions for the problem you are experiencing. Before you begin to troubleshoot any probl...

123 T r oubleshoo t ing Picture problems Other problems. If your TV’s problem is not addressed in this Troubleshooting section or the recommended solution has not worked, use the Reset Factory Defaults procedure, see “Resetting Factory Defaults” on page 59 . TV will not turn on. Ensure the power cor...

124 T r oubleshoo t ing Picture problems Video Input Selection problems If the Input Selection window does not appear when you press INPUT on the remote control or TV, press INPUT a second time. This will cause a change to the next video input source and display the Input Selection window. Cannot vi...

125 T r oubleshoo t ing Sound problems Scrolling text problem When slow motion video is present the units will treat any scrolling text as film and may cause a slight jitter of the scrolling text. Turning off the Film Stabilization feature will correct this issue, see “Film Stabilization (L5200U Ser...

126 T r oubleshoo t ing Channel tuning problems Channel t uning p r oblems Ensure that the remote control is set to the correct device mode, see “Learning about the remote control” on page 43 . The Auto Tuning feature may have erased the channel from memory. Add the channel to the channel memory, se...

127 T r oubleshoo t ing No HDMI® CEC operation No HDMI® CEC ope r a t ion The HDMI® CEC feature is available for Toshiba HDMI® CEC compatible devices. Ensure that HDMI ® cables with the ( ) Logo are used. When the connected HDMI® CEC device does not work correctly after you have changed settings of ...

128 Appendix A S pecifications ❖ These models comply with the specifications listed below. ❖ Designs and specifications are subject to change without notice. ❖ These models may not be compatible with features and/or specifications that may be added in the future. Television sys t em Channel cove r a...

129 Specifica t ions Power source Powe r sou r ce 120V AC, 60 Hz Powe r maximum cu rr en t Powe r consump t ion Audio powe r 19L4200U 0.9 A 24L4200U 0.8 A 32L4200U 0.9 A 40L5200U 0.9 A 46L5200U 1.1 A 50L5200U 1.3 A 19L4200U 0.2 W in Standby mode 24L4200U 0.2 W in Standby mode 32L4200U 0.2 W in Stand...

130 Specifica t ions Speaker type Speake r t ype Video/audio t e r minals Video/audio inpu t Colo r S tr eam ® (componen t video) HD inpu t HDMI ® inpu t Digi t al audio ou t pu t Optical type PC inpu t 15-Pin D-sub Analog RGB 19L4200U Two 3.7 x 1.06 x 0.8” 24L4200U Two 3.58 x 0.98 x 0.9” 32L4200U T...

131 Specifica t ions Dimensions Dimensions Mass (weigh t ) Ope r a t ing condi t ions 19L4200U Width 1'-5 1/2” (445.8mm) Height 1'-3/4” (324.5mm) Depth 7” (445.8mm) 24L4200U Width 1'-10 3/8” (567.52mm) Height 1'-2 1/4” (362.54mm) Depth 7” (177.52mm) 32L4200U Width 2'-5 3/8” (745.4mm) Height 1'-7 7/8...

132 Specifica t ions Supplied accessories Supplied accesso r ies ❖ Remote control with two size “AAA” batteries ❖ Warranty ❖ Resource Guide ❖ Quick Start Guide ❖ Pedestal and hardware Accep t able signal fo r ma t s fo r PC IN, HDMI ® PC IN signal fo r ma t s Depending on the connected PC, the follo...

133 Specifica t ions Acceptable signal formats for PC IN, HDMI® ❖ Some illustrations in this User's Guide are for explanation purposes and may differ from the actual unit. ❖ Designs and specifications are subject to change without notice. ❖ These models may not be compatible with features and/or spe...

134 Appendix B License Agreement License Info r ma t ion on t he sof t wa r e used in t he TOSHIBA Digi t al TV The software pre-installed in the TOSHIBA Digital Televisions consists of multiple, independent software components. Each software component is copyrighted by TOSHIBA or a third party. The...

135 License Ag r eemen t implied. "Warranty" here includes, but not limited to, an implied warranty for marketability or fitness for specific uses. All risks associated with the quality or performance of these software components are assumed by the user. TOSHIBA shall not be liable whatsoeve...

136 License Ag r eemen t (3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept NO LIABILITY for damages of any kind. These conditions apply to any software derived from or based on the IJG code, not just t...

138 Index A advanced picture settings CableClear® digital Noise Reduction 120 Color temperature 117 Dynamic Contrast 116 MPEG Noise Reduction 120 Static Gamma 117 using 116 audio adjusting quality 86 Audyssey ABX™ 87 Dolby® Digital Dynamic Range Control 88 muting sound 84 optical audio output format...