Page 2 - Safety Precautions; CAUTION
2 Safety Precautions This lightning flash with arrowhead symbol within anequilateral triangle is intended to alert the user tothe presence of uninsulated dangerous voltagewithin the product’s enclosure that may be of sufficient magnitude to constitute a risk of electricshock to persons. The exclamat...
Page 3 - INTRODUCTION; IMPORTANT SAFETY INSTRUCTIONS
INTRODUCTION 3 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. - All these safety and oper- ating instructions should be read before the product isoperated. 2. Keep these instructions. - The safety, operating and use instructions should be retained for future refer-ence. 3. Heed all warnin...
Page 4 - Table of Contents; Introduction; Checking the contents of; Reference; Setting Cable Box/DSS; About the symbols for instructions; Note
4 Table of Contents Introduction Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 ...
Page 5 - Before Use; Playable Discs; This unit only support SVCD stream 1 audio.; Notes on DVDs and Video CDs; Scene; Types of video CDs; Caution; Remote Control Operation Range; ALL
INTRODUCTION 5 Before Use Playable Discs DVD (8 cm/12 cm disc) Video CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm/12 cm disc) In addition, this unit can plays DVD -R, DVD +R, DVD -RW, DVD +RW, SVCD, and CD-R / CD-RW that con-tains audio titles, MP3, WMA, and/or JPEG files. This indicates a product fe...
Page 6 - Precautions; When shipping the unit; Notes on Discs; ” may appear on the TV screen during operation.
6 Before Use (Continued) Precautions Handling the unit When shipping the unit The original shipping carton and packing materialscome in handy. For maximum protection, re-pack theunit as it was originally packed at the factory. When setting the unit The picture and sound of a nearby TV or radio may b...
Page 7 - Front Panel; LINE IN 2
7 INTRODUCTION Front Panel OPEN/CLOSE Opens or closes the disc tray. Remote Sensor Point the DVD+VCR remote control here. Display window Shows the current status of the DVD+VCR. Disc Tray (DVD deck) Insert a disc here. ON/STANDBY Switches the DVD+VCR ON and OFF. LINE IN 2 (VIDEO IN/AUDIO IN (Left/Ri...
Page 8 - Display Window; DVD; A cassette is in the VCR deck.
8 Display Window DVD VCRREC PM TV [P] DVD+VCR is in timer recording or a timerrecording is programmed.(VCR part only) A cassette is in the VCR deck. The VCR deck is selected. DVD+VCR is Recording. (VCR part only) Indicates PM time. (AM is not displayed.) Lights when TV mode is active (See page 22.) ...
Page 9 - Rear Panel; Connect to a TV with video and audio inputs.; AC Power Cord; Plug into the power; HDMI OUT
9 INTRODUCTION Rear Panel Do not touch the inner pins of the jacks on the rearpanel. Electrostatic discharge may cause permanentdamage to the unit. VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right)) Connect the audio/video output of an external source (Audio system,TV/Monitor, Another VCR). ANT.IN (ANTE...
Page 10 - Remote Control; COUNTER; Forward slow playback of tape.
10 Remote Control POWER Switches DVD+VCR ON and OFF. INPUT SELECT To select the VCR deck’s source (Tuner, LINE 1, or LINE 2). CLK/CNT, DISPLAY Accesses On-Screen display. Switches among the clock, tape counter and tape remaining modes on the display. DVD/VCR To control DVD+VCR operating. TV To contr...
Page 11 - Connections; an; Without Cable Box; PREP
Connections TiP : Depending on your TV and other equipment you wish toconnect, there are various ways you could connect theDVD+VCR. Use connections described on pages 11-13.Please refer to the manuals of your TV, VCR, StereoSystem or other devices as necessary to make the bestconnections.For better ...
Page 12 - Basic TV Connections; RF coaxial connection; Component Video (Color Stream; the
12 Connections (Continued) Basic TV Connections Make one of the following connections, depending onthe capabilities of your existing equipment. RF coaxial connection Connect the RF.OUT jack on the DVD+VCR to theantenna in jack on the TV using the 75-ohm CoaxialCable supplied (R) . Note: If you use t...
Page 13 - HDMI connection; “hdmi” will appear on the display window.; About HDMI
Connections (Continued) Optional, Preferred TV Connections If you have a HDMI TV or monitor, you can connect it tothis DVD+VCR using a HDMI cable. HDMI connection 11 Connect the HDMI OUT jack on the DVD+VCR tothe HDMI jack on a HDMI compatible TV or mon-itor (H). 22 Set the TV’s source to HDMI (refe...
Page 14 - not; Digital Multi-channel sound; VCR IN LINE 1
Connections (Continued) Optional, Preferred TV Connections Note: You can ONLY listen to DVD playback using COAXIAL (X) , OPTICAL (O) and AUDIO OUT (A2) connections. The tuner and VCR will still be heard through theRF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See page 12.) Connecting to an amplifier e...
Page 15 - Before Operation - VCR Part; Easy Information; Setting the On-Screen Display; Menu Selection
Before Operation - VCR Part On-Screen Display (OSD) Select VCR as the viewing source by pressingDVD/VCR SELECT until the VCR indicator appears inthe display window. Some of these functions will be displayed every timethe VCR is operated. ❶ ❷ ❸ ❹ ❺ ❻ ❼ ❶ TAPE SPEED DISPLAY Shows the current tape spee...
Page 16 - AUTO CHANNEL PROGRAMMING
16 Before Operation - VCR Part (Continued) Setting the VCR Setup Menu 11 Press VCR MENU and the MAIN menu willappear. 22 Press v / V to select the SETUP menu, then press ENTER. The SETUP menu will appear. 33 Press v / V to choose a desired option on the SETUP menu. Then press b / B to choose a desir...
Page 17 - Setting the Clock; Auto Clock Set; Manual Clock Set; Things to know before starting
PREP ARA TION 17 Setting the Clock The DVD+VCR gives you two ways to set the time anddate: the Auto Clock Feature or manually. The Auto ClockFeature enables the DVD+VCR to set up the clock whenthe DVD+VCR is turned off. Auto Clock Set The Auto Clock Set feature is set to ON at the factory. In theON ...
Page 18 - Before Operation - DVD Part; DVD On-Screen Display; Press DISPLAY during playback.; Items
18 Before Operation - DVD Part DVD On-Screen Display Select DVD as the viewing source by pressingDVD/VCR SELECT until the DVD indicator appears inthe display window. You can display the general playback status on the TVscreen. Some items can be changed using the menu.To use the on-screen display: 11...
Page 19 - Initial Settings; General Operation; Menu Language
Before Operation - DVD Part (Continued) Initial Settings By using the Setup menu, you can make various adjust-ments to items such as picture and sound. You can alsoset a language for the subtitles and the Setup menu,among other things. For details on each Setup menuitem, see pages 19 to 22. To displ...
Page 20 - DISPLAY; LetterBox; AUDIO
20 Before Operation - DVD Part (Continued) DISPLAY TV Aspect 4:3 : Select when a standard 4:3 TV is connected. 16:9 Wide: Select when a 16:9 wide TV is connected. Display Mode Display Mode setting works only when the TV Aspectmode is set to “4:3”. LetterBox : Displays a wide picture with bands on th...
Page 21 - PBC; On; Auto Play
PREP ARA TION 21 Before Operation - DVD Part (Continued) OTHERS The PBC, Auto Play, B.L.E., Pluge and DNR settingscan be changed. PBC Set Playback Control (PBC) to On or Off. On : Video CDs with PBC are played according to the PBC. Off : Video CDs with PBC are played the same way as Audio CDs. Auto ...
Page 22 - Rating; Unlock; If you forget your Security Code; Country Code
22 Before Operation - DVD Part (Continued) LOCK (Parental Control) Rating Some movies contain scenes that may not be suitablefor children to view. Many of these discs containparental control information that applies to the completedisc or to certain scenes on the disc. Movies andscenes are rated fro...
Page 23 - Operation with tape; Insert a prerecorded video cassette.; PLAY appears on the TV screen .; Press STOP to stop playback.; STOP appears on the TV screen.; Tracking Control; Auto Tracking; Special Effect Playbacks; Special effects playback notes; Search
OPERA TION 23 Operation with tape Normal Playback Preparation: Turn on the TV.Tune the TV to the DVD+VCR output channel (CH 3 or 4) orset the TV’s source selector to VIDEO.If a direct VIDEO/AUDIO connection is made between theDVD+VCR and the TV, set the TV’s source selector toVIDEO.Set the Output So...
Page 24 - VISS Scan; Normal playback of that program will begin.; VISS Search; Normal Recording; To pause the recording; Using the TV, select the channel to be viewed.
24 Operation with tape (Continued) VISS (VHS Index Search System) The VHS INDEX SEARCH SYSTEM enables you tolocate the beginning of any recording made on this VCR.Whenever a recording begins, an invisible INDEX mark isrecorded on the tape. VISS Scan VISS SCAN lets you search out each VISS mark on th...
Page 25 - Timer Recording; The PROGRAM menu will appear.
OPERA TION 25 Operation with tape (Continued) Timer Recording This DVD+VCR can be programmed to record up to 8programs within a period of 1 year. For unattendedrecording, the timer needs to know the channels to berecorded and the starting and ending times. Preparation: Turn on the power of both the ...
Page 26 - Program Priority; Insert a video cassette with the safety tab intact.; Checking the Recording Time
26 Operation with tape (Continued) Checking (Erasing) the Timer Program Programming can be checked whenever the DVD+VCRis turned on. 1 Press VCR MENU and the MAIN menu will appear. 2 Use v / V to choose the PROGRAM menu. Press ENTER and the PROGRAM menu will appear. 3 Use b / B to select a program y...
Page 27 - Copying from DVD to VCR; Insert Disc; Insert a blank VHS video tape into the VCR deck.; Press PLAY on the DVD deck.; The DVD will go into play mode; Press REC on the VCR deck.
OPERA TION 27 Operation with tape (Continued) Dubbing and Editing If you wish to edit or dub your camcorder (or anotherVCR) recordings to this DVD+VCR, the rear (or Front)panel mounted Audio and Video (A/V) input jacksmake the connections quick and easy. These directA/V jacks will also provide bette...
Page 28 - Playback with Hi-Fi Stereo Audio Sound; Adjust volume at your stereo system.; TV screen
28 Operation with tape (Continued) VHS Hi-Fi Stereo System/MTS Broadcast This DVD+VCR is equipped with the VHS Hi-Fi audiosound system for recording and playback. The informa-tion below gives a brief description of Hi-Fi audio andhow to record and play a tape in the Hi-Fi audio mode. Playback with H...
Page 29 - Tape Counter Memory Feature; to select the real-time counter; Counter Memory Function; Begin recording or playing a tape.; Tape Remaining; until the REM indicator displays on the; Additional Information; Auto Play System
OPERA TION 29 Operation with tape (Continued) Tape Counter Memory Feature Real-Time Counter Shows length of tape run in hours, minutes, and sec-onds. Press CLK/CNT to select the real-time counter display.Every press of CLK/CNT changes the TV screen as illustrated below. Counter changes to “0:00:00” ...
Page 30 - Playback Setup; b B v V; General Features; Moving to another TITLE; Press; followed by; Moving to another CHAPTER/TRACK
30 Operation with DVD and Video CD Playing a DVD and Video CD Playback Setup Turn on the TV and select the video input source connected to the DVD+VCR. Audio system: Turn on the audio system and selectthe input source connected to the DVD+VCR. Set the output source to DVD as shown in Selectingthe Vi...
Page 31 - Operation with DVD and Video CD (Continued); Slow Motion; SLOW; Random; RANDOM; Repeat; Time Search; D Surround
OPERA TION 31 Operation with DVD and Video CD (Continued) General Features (continued) Slow Motion 1 Press SLOW T during playback or still mode. The player will enter SLOW mode. 2 Press SLOW T repeatedly to select the required speed : T 1/16, T 1/8, T 1/4 or T 1/2 (forward). 3 To exit slow motion mo...
Page 32 - Special DVD Features; the angle icon appears briefly on the TV
32 Operation with DVD and Video CD (Continued) General Features (continued) Zoom Use zoom to enlarge the video image. 1 Press ZOOM during playback or still playback to acti-vate the Zoom function. The square frame appearsbriefly in the right bottom of the picture. 2 Each press of the ZOOM button cha...
Page 33 - Operation with Audio CD and MP3/WMA Disc; Audio CD
OPERA TION 33 Operation with Audio CD and MP3/WMA Disc Playing an Audio CD or MP3/WMA Disc The DVD+VCR can play MP3/WMA formatted record-ings on CD-ROM, CD-R, or CD-RW discs. Audio CD Once you insert an audio CD a menu appears on theTV screen. Press v / V to select a track then press PLAY ( N ) or E...
Page 34 - from
34 Operation with Audio CD and MP3/WMA Disc (Continued) Pause 1 Press PAUSE/STEP X X/ /C C during playback. 2 To return to playback, press PLAY N or press PAUSE/STEP X X/ /C C again. Moving to another Track Press SKIP > or . briefly during playback to go to the next track or to return to thebegin...
Page 35 - Operation with JPEG Disc; v V b B
OPERA TION 35 Operation with JPEG Disc Viewing a JPEG Disc Using this DVD+VCR you can view JPEG files. 1. Insert a disc and close the tray. The PHOTO menu appears on the TV screen. 2. Press v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in a filelist and...
Page 36 - Programmed Playback; Repeat Programmed Tracks; v V B; Erasing the Complete Program List
36 Programmed Playback WMA MP3 VCD1.1 VCD2.0 CD Programmed Playback The program function enables you to store yourfavourite tracks from any disc in the player memory. Aprogram can contain 30 tracks. 1. Insert a disc. Audio CD or MP3/WMA Discs: AUDIO CD or MUSIC menu appears. 2. Press PROGRAM. The ma...
Page 37 - Additional Operation; One Touch Replay; Detailed Description of each Video Mode
OPERA TION 37 Additional Operation Playing a DVD VR format Disc This unit will play DVD-R/RW discs recorded using theDVD-Video format that have been finalized using aDVD-recorder. • This unit will play DVD-RW discs recorded using the Video Recording (VR) format. 1. Insert a disc and close the tray. ...
Page 38 - Setting TV Control Codes; Press TV to set the remote control operating; ENTER; Important; Controlling Your TV with the Supplied Remote
The remote control can be compatible with variousbrands of TV/Cable box/DSS satellite receiver by settingtheir control codes. The TOSHIBA code has initiallybeen set to control TOSHIBA TVs. Setting TV Control Codes 1. Press TV to set the remote control operating your TV. 2. While holding down PROGRAM...
Page 39 - REFERENCE; Controlling Your TV with the Supplied Remote (Continued); Table of TV Brand Codes
REFERENCE 39 Controlling Your TV with the Supplied Remote (Continued) Table of TV Brand Codes Brand name of your TV Brand Code Toshiba 01 Bell & Howell 09 Carver 10 Celebrity 03 Citizen 12 Curtis Mathes 09, 12 Dumont 14 Electro band 03 Emerson 09, 11 Fisher 09 GE 02, 07, 11 Gibraiter 14 Goldstar...
Page 41 - Controlling Your Cable Box/DSS
Controlling Your Cable Box/DSS ® Satellite Receiver (Continued) REFERENCE 41 Table of Cable Box Brand Codes Brand name of your Cable box Brand Code Toshiba 36 Anvision 13, 20, 21, 22, 23, 24,25, 26, 58, 62, 84 Archer 1, 20, 21, 29, 42, 44,63, 88, 91 Cablestar 13, 20, 21, 22, 23, 24,25, 26, 58, 62, 8...
Page 42 - Troubleshooting; Symptom
Troubleshooting 42 Symptom No power. The power is on, but theDVD+VCR does notwork. Abnormal or no picture. Distorted or no sound. The playback picture ispoor. The DVD+VCR does notstart playback. Cause The power cord is disconnected. No disc is inserted.No tape is inserted. The TV is not set to recei...
Page 44 - Language Code List
44 Language Code List Code Language 6566 Abkhazian 6565 Afar 6570 Afrikaans 8381 Albanian 6577 Amharic 6582 Arabic 7289 Armenian 6583 Assamese 6588 Aymara 6590 Azerbaijani 6665 Bashkir 6985 Basque 6678 Bengali; Bangla 6890 Bhutani 6672 Bihari 6682 Breton 6671 Bulgarian 7789 Burmese 6669 Byelorussian...
Page 45 - Country/Area Code List; Enter the appropriate code number for the initial setting “
REFERENCE 45 Country/Area Code List Code Country/Area AD Andorra AE United Arab Emirates AF Afghanistan AG Antigua and Barbuda AI Anguilla AL Albania AM Armenia AN Netherlands Antilles AO Angola AQ Antarctica AR Argentina AS American Samoa AT Austria AU Australia AW Aruba AZ Azerbaidjan BA Bosnia-He...
Page 46 - Specifications; General; Outputs; VCR Specifications
46 Specifications General Power requirements AC 120V , 60 Hz Power consumption 23W Dimensions (approx.) 430 X 78.5 X 275 mm (16.9 X 3.1 X 10.8 inches) (w x h x d) Mass (approx.) 8.8 lbs (4.0 kg) Operating temperature 5 ˚ C to 40 ˚ C (41 ˚ F to 104 ˚ F) Operating humidity 5 % to 90 % Signal system NT...
Page 47 - (3) The warranties from TACP are effective only if the
Limited United States WarrantyDVD/VCR COMBINATION - Exchange Warranty Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumersin the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASEROR ANY PERSON RECEIVING THIS DV...
Page 48 - How to Obtain Warranty Services; (2) Include your bill of sale or other proof of purchase
How to Obtain Warranty Services If, after following all of the operating instructions in thismanual and checking the section “Troubleshooting”, youfind that service is needed:(1) For instructions on how to obtain warranty service for exchange program DVD/VCR COMBINATIONs,contact TACP’S toll free Cal...
Page 49 - Printed in Indonesia
