Page 2 - Introduction; SAFETY PRECAUTIONS; FCC NOTICE; CAUTION
2 Introduction SAFETY PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, do not expose this appliance to rain or moisture. CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO P...
Page 3 - All operating and use instructions should be followed.; WATER AND MOISTURE; combination to overturn.; GROUNDING OR POLARIZATION; where they exit from the appliance.; IMPORTANT SAFEGUARDS
3 Introduction 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions ...
Page 4 - OBJECT AND LIQUID ENTRY; EXAMPLE OF ANTENNA GROUNDING AS PER THE
4 Introduction IMPORTANT SAFEGUARDS 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to theunit due to lightning and power l...
Page 5 - TO USE AC POWER SOURCE; • Never connect the AC line cord plug to other than the specified; Power source; WARNING
5 Introduction 19. REPLACEMENT PARTS When replacement parts are required, be sure the service technician uses replacement parts specified bythe manufacturer or those that have the same characteristics as the original part.Unauthorized substitutions may result in fire, electric shock or other hazards...
Page 6 - Notes on handling; Precautions
6 Introduction Notes on handling When shipping the DVD/VCR, the original shippingcarton and packing materials come in handy. Formaximum protection, repack the unit as it wasoriginally packed at the factory.Do not use volatile liquids, such as insect spray, nearthe DVD/VCR. Do not leave rubber or pla...
Page 7 - Notes on discs; On handling discs; On cleaning discs; Structure of disc contents; Notes on copyright
7 Introduction Notes on discs On handling discs Do not touch the playback side of the disc. Do not attach paper or tape to discs. On cleaning discs Fingerprints and dust on the disc cause picture andsound deterioration. Wipe the disc from the centeroutwards with a soft cloth. Always keep the disccle...
Page 8 - About this owner’s manual; On Video CDs; • Video CD not equipped with PBC function; Playable discs; is a trademark of DVD Format/Logo Licensing
8 Introduction D I G I T A L V I D E O About this owner’s manual This owner’s manual explains the basic instructions ofthis DVD/VCR. Some DVD video discs are produced ina manner that allows specific or limited operation duringplayback. As such, the DVD/VCR may not respond to alloperating commands. T...
Page 9 - and Audio CD; Others; Contents; Connections
9 Introduction SAFETY PRECAUTIONS ................................ 2IMPORTANT SAFEGUARDS .......................... 3Power source ................................................... 5Precautions ...................................................... 6Notes on discs .....................................
Page 10 - Identification of controls; Front panel
10 Introduction Identification of controls See the page in for details. Front panel Rear panel ON/STANDBY button AUDIO (L/R)/VIDEO IN(LINE IN 2) jacks 22 40 EJECTbutton 29 Disc tray 42 Display window 11 REC button 34 CHANNEL / buttons 34 OPEN/CLOSE button 42 Remote sensor 13 VCR mode indicator DVD m...
Page 11 - VCR operation status; Disc operation status; Press; Display window
11 Introduction VCR operation status CH 125 8 : 47 AM MON 00 : 00 : 00 SP STEREO SAP While watching TV DAY OF THE WEEK CHANNEL TAPE SPEED REAL TIME COUNTER CLOCK STEREO AND SECOND AUDIO PROGRAM (SAP) 8 : 30 AM MON 00 : 15 : 12 SP HI-FI STEREO While operating a tape OPERATINGMODE TAPE IN AUTO REPEAT ...
Page 12 - Remote control; DVD MENU button
12 Introduction Remote control DVD MENU button Use the DVD MENU button to display the menuincluded on many DVD video discs. To operate a menu,follow the instructions in “DVD Menu.” 49 Identification of controls (Continued) The instructions in this manual describe the functions on the remote control....
Page 13 - Operation; Remote control basics
13 Introduction Operation • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within 30 ° angle on either side of the remote sensor, up to a distance of approx. 7 meters. Replace the compartmentcover. Install two “AAA” batteries(supplied),...
Page 14 - Combination VHF/UHF Antenna with 75 ohm Coaxial Cable; Antenna connections; Antenna to DVD/VCR connection
14 Connections Notes: • A clear picture will not be obtained by the DVD/VCR unless the antenna signal is good. Connect the antenna tothe DVD/VCR properly. • For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use of an outdoor typeantenna is required. • If...
Page 15 - DVD/VCR to TV connection
15 Connections U H F V H F U H F V H F V H F / U H F I N Note: If a VHF or UHF antenna is used, set the TV/CABLE menu option to the “TV” mode. Note: If a VHF or UHF antenna is used, set the TV/CABLE menu option to the “TV” mode. Note: If a VHF or UHF antenna is used, set the TV/CABLE menu option to ...
Page 16 - Cable TV connections; Many cable companies
16 Connections Cable TV connections V H F / U H F I N ( A N T ) V H F / U H F I N ( A N T ) V H F / U H F I N ( A N T ) Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This DVD/VCR has an extended tuning range and can be tuned to mos...
Page 18 - Connecting to a TV; Basic connection
18 Connections Connecting to a TV Connect the DVD/VCR to your TV. To VIDEO OUT To ANALOG AUDIO OUT (red) (white) (yellow) Signal flow To wall outlet To video input (yellow) (red) Audio/video cable (supplied) To audio inputs (white) Notes: • Refer to the owner’s manual of the connected TV as well.• W...
Page 19 - Component video outputs
19 Connections Notes: • Refer to the owner’s manual of the connected equipment as well.• When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. • If you place the DVD/VCR near a tuner or radio...
Page 20 - Connecting to optional audio equipment; Connecting to an amplifier equipped with a Dolby Digital decoder; Connecting to an amplifier equipped with a DTS decoder
20 Connections Connecting to optional audio equipment You can enjoy high quality dynamic sounds of DVD video discs oraudio CDs by connecting the DVD/VCR to optional audioequipment. Connection for video signal to your TV, see 18 19 . : Front speaker: Rear speaker: Sub woofer : Center speaker: Signal ...
Page 21 - Connecting to an amplifier equipped with an MPEG2 audio decoder; Connecting to an amplifier equipped with a digital audio input
21 Connections 75 Ω coaxial cable (not supplied) 75 Ω coaxial cable (not supplied) Warning When playing DTS-encoded discs (DVD video disc and audio CDs), excessive noise may be output from the analog stereojacks. To avoid possible damage to the audio system, you should take proper precautions when t...
Page 22 - Setting the video channel; Press VCR DVD selector to select the VCR mode.; For a push-button TV tuner
22 Basic setup (VCR) Setting the video channel When a TV is connected with the 75 ohm coaxial cable only. To view playback of a recorded tape or DVD disc, or to watch aprogram selected by the VCR's channel selector, the TV must be set tochannel 3 or 4 (video channel). Setting the video channel Press...
Page 23 - Setting the language; VCR DVD; VCR MENU
23 Basic setup (VCR) Press SET + or – to select “LANGUAGE”, thenpress ENTER. Press VCR MENU. The VCR menu screen will appear.Press SET + or – to select “SYSTEM SETUP”, then press ENTER . If you use the unit for the first time,press VCR MENU , instead of the “SYSTEM SETUP” menu screen ofthe main menu...
Page 24 - Connect the Antenna or Cable system.; Clock setting; AUTO CLOCK setting; Plug the AC power cord to the AC outlet.; Wait at least three minutes and press POWER.; AUTO CLOCK adjustment; Press ENTER to select “OFF”.; POWER
24 Basic setup (VCR) Connect the Antenna or Cable system. • If you use a cable box, turn it on. Clock setting The AUTO CLOCK function will automatically set the built-in clock(Month, Day, Year and Time) when the DVD/VCR is connected to anAntenna or Cable system and it is turned off. The DVD/VCR sear...
Page 26 - Manual clock setting; To make corrections any time during the process; CANCEL; ENTER
26 Basic setup (VCR) CANCEL Press VCR MENU. EXAMPLE: Setting the clock to “8:30 AM” March, 25(SAT), 2006. 1 8 : 30 AM SAT Manual clock setting After setting the clock, date and time startsfunctioning automatically. 6 Note: After a power failure or disconnection of the power, the timersettings will b...
Page 27 - Tuner setting; Setting channels automatically
27 Basic setup (VCR) Tuner setting This DVD/VCR is equipped with a channel memory feature which allowschannels to skip up or down to the next channel set into memory,skipping over unwanted channels. Before selecting channels, they mustbe programmed into the DVD/VCR’s memory. In addition to normalVHF...
Page 28 - To ADD/DELETE channels; Noise elimination
28 Basic setup (VCR) Repeat the step 1 on page 27 . Then press SET + or – to select the “ADD/DELETE” and press ENTER. 1 To ADD/DELETE channels Press VCR MENU until the menu screen iscleared. 3 To Add or Delete channels 2 CH SETUP TV ADD/DELETE CABLE +/Ð/ENTER/MENU AUTO CH MEMORY 1) Press Direct chan...
Page 29 - Loading and unloading a cassette tape; Loading; To record again; Automatic tape eject; Unloading; To prevent accidental erasure; EJECT
29 Basic setup (VCR) Loading and unloading a cassette tape Use only video cassette tapes marked . Loading Remove the erase prevention tab with a screwdriver. Cover the hole with a piece of adhesive tape. To record again Screwdriver Automatic tape eject This DVD/VCR will automatically rewind the tape...
Page 30 - Cassette tape playback; Playback; PLAY
30 Playback (VCR) Cassette tape playback To play a prerecorded tape. Load a prerecorded tape (When loading a cassette tape without the eraseprevention tab, playback will start automatically). Preparation: • Turn ON the TV and select the corresponding video input.• Press VCR DVD selector to select th...
Page 31 - Special playback; REV; CM SKIP
31 Playback (VCR) Special playback Picture search Reverse picture search function Press REV once or twice during playback. Forward picture search function Press FWD once or twice during playback. To return to playback, press PLAY . Press PAUSE/STEP during playback. To resume normal playback, press P...
Page 32 - Convenience function; To cancel repeat mode; Repeat playback
32 Playback (VCR) Convenience function To cancel repeat mode : Follow the above step 1 , then press ENTER to select “OFF” position. Press VCR MENU to return to the TV. Press VCR MENU. Press SET + or – to select “AUTO REPEAT”. 1 Press ENTER to select “ON” or “OFF”. If “ON” is selected, the playbackwi...
Page 33 - Video index search system; STOP
33 Playback (VCR) This function enables you to locate the beginning of any recordingmade on the VCR. Recording an INDEX mark The Index Search function auto-matically records an INDEX markon the tape whenever a recordingis initiated. Index search Press INDEX + or – during stop or play mode. For Succe...
Page 34 - Recording a TV program; TV mode direct channel selection:
34 Recording (VCR) Recording a TV program Recording and viewing the same TV program. Recording a TV program Load a cassette tape with the erase preventiontab intact. The DVD/VCR will automatically turn on. 1 00 : 00 : 00 SP +0 CH 110 INDEX Press SP/SLP to select the desired tape speedSP or SLP. The ...
Page 35 - Press STOP to stop recording.; To stop recording temporarily
35 Recording (VCR) Press STOP to stop recording. “ ” will appear on screen for about 4 seconds. Press PAUSE/STEP to avoid recording unwantedmaterial. Press again to continue the recording. “ ” will appear on screen for about 4 seconds. Notes: • The pause function will be released after 5 minutes to ...
Page 36 - To cancel OTR
36 Recording (VCR) One-touch Timer Recording (OTR) The One-touch Timer Recording feature provides a simple andconvenient way to make a timed recording. One-touch Timer Recording (OTR) Press once twice 3 times 4 times 5 times NORMAL REC 0:30 1:00 1:30 2:00 3:00 4:00 5:00 6:00 NORMAL REC Recording tim...
Page 37 - Timer recording
37 Recording (VCR) Timer recording Timer recording can be programmed on-screen with the remote control.The built-in timer allows automatic unattended recording of up to 8programs within 1 month. Timer recording Notes: • Press CANCEL to move cursor backward for correction. • To record from external s...
Page 38 - To confirm Timer program:; If the programs overlap another; To cancel Timer program:; To confirm or cancel a program
38 Recording (VCR) Setting procedure To set daily/weekly timer To confirm Timer program: At step 1 on page 37 select “TIMER REC SET” and press ENTER . The timer program list will appear on the screen. 2 The current day (Friday) SU-SA (Sunday to Saturday) MO-SA (Monday to Saturday) MO-FR (Monday to F...
Page 39 - Stereo recording and playback
39 Other functions (VCR) Stereo recording and playback /Second Audio Program (SAP) When a MTS STEREO broad-cast is received, “STEREO” willappear on the screen for about 4seconds and the program canbe viewed or recorded in stereo.The Hi-Fi stereo recording pro-cedure is the same as for normalrecordin...
Page 40 - Duplicating a video tape; Connection with second VCR; Press PLAY on the playback VCR or Camcorder.
40 Other functions (VCR) To AUDIO (L) OUT AUDIO/VIDEO cable (supplied) Playback VCR To VIDEO OUT To AUDIO (R) OUT Recording VCR To AUDIO (L) IN To VIDEO IN To AUDIO (R) IN Duplicating a video tape If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. M...
Page 41 - Recording a DVD/CD disc; Duplicating a DVD or CD disc; Press VCR DVD selector to select the DVD mode.
41 Other functions (VCR) Press REC/OTR to start recording. The DVD/VCR will change to theVCR mode automatically and theplayback picture or sound will beduplicated on the video cassettetape. Recording a DVD/CD disc You can record disc material in DVD, Audio CD, etc. onto a Videotape with this DVD/VCR...
Page 42 - Basic playback; Playing a disc; To start playback in the stop mode
42 CAUTION Keep your fingers well clear of the disc tray as it is closing.Neglecting to do so may cause serious personal injury. Basic playback Playing a disc This section shows you the basics on how to play a disc. Basic playback (DVD) Preparations: • When you want to view a disc, turn on the TV an...
Page 44 - FWD
44 Playing a disc (Continued) You can play discs at various speeds. Playing frame by frame Basic playback (DVD) DVDVCD DVDVCD Playing in fast reverse or fast forward directions Press REV or FWD during playback. REV : Fast reverse playback FWD : Fast forward playback Each time you press REV or FWD , ...
Page 45 - Zooming; Zooming/Locating desired scene; Locating desired scene; ZOOM
45 Zooming 1 2 Press ZOOM during playback. The center part of the image will bezoomed in.Each press of ZOOM will change the ZOOM 1 (x 1.3), 2 (x 1.5) and 3 (x 2.0). Zooming/Locating desired scene This unit will allow you to zoom in on the frame image. You can then make selections by switching the po...
Page 46 - Marking desired scenes; MARKER
46 Advanced playback (DVD) Marking the scenes Returning to the scenes 1 Press MARKER during playback or stop mode. 2 1 3 Marking desired scenes The unit stores the points that you want to watch again up to 3 points.You can resume playback from each scene. 2 3 Notes: Some discs may not work with the ...
Page 47 - Off; PLAY MODE
47 Repeat playback 1 Press PLAY MODE during playback or stop mode. Repeat playback/A-B Repeat playback Press PLAY MODE again to clear the screen. 3 A-B Repeat playback 1 Press A-B RPT during playback. The start point is selected. A-B repeat playback allows you to repeat material betweentwo selected ...
Page 48 - Program playback; Program playback/Random playback; Random playback
48 Program playback Press PLAY MODE during stop mode. 1 Press B B B B B / A A A A A to return to the left column, then press C C C C C / D D D D D to select the “Program Playback” and press ENTER. The programs you selected will start to playback inthe order. • To resume normal playback, select Mode ...
Page 49 - ANGLE; Changing angles
49 Press C C C C C / D D D D D / B B B B B / A A A A A to select the desired title. Changing angles/Title selection/DVD menu Press ANGLE during playback. The current angle will appear. When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scen...
Page 50 - Changing soundtrack language; AUDIO; Setting surround sound; QSound Off
50 Changing soundtrack language 1 2 Press AUDIO during playback. The current soundtrack language willappear. Changing soundtrack language/Setting surround sound You can select the language when you play a multilingual disc. Notes: • If the desired language is not heard after pressing the button seve...
Page 51 - Subtitles/To turn off the PBC; SUBTITLE; Subtitles; To turn off the PBC
51 Subtitles/To turn off the PBC SUBTITLE When playing back a disc recorded with subtitles, you canselect the subtitle language or turn the subtitle off. To turn off the subtitle, press SUBTITLE until“Off” appears. • The on screen display will disappear after a few seconds. 1 Notes: • Depending on t...
Page 52 - and Audio CD operation; CD information
52 MP3/WMA/JPEG/DivX ® and Audio CD operation This player can play back the MP3/WMA/JPEG/DivX ® -data which has been recorded on CD-R or CD-RW. To produce the MP3/WMA/JPEG/DivX ® -data, you need a Windows-PC with CD-RW drive and a MP3/WMA/JPEG/DivX ® -encoding Software (not supplied). The Apple-HFS-...
Page 53 - MP3/WMA CD and Audio CD playback; Press STOP to end playback.
53 Press / to select file. • In case the current directory includes more than 8 files, press or to scroll in the file list. • To see contents in folder, select the folder and then press ENTER . To return to the upstairs directory, select “ Go Up ...” then press ENTER . • When PLAY is pressed after d...
Page 54 - DivX; and Audio CD
54 The slide show enables you to view pictures (files) one afteranother automatically. Preparation: Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds”or “15 Seconds” 61 . Place a disc on which JPEG files have beenrecorded onto the tray. 1 A file browser screen will appear on thescreen. 2 Press...
Page 55 - Playing DivX
55 TOP MENU DVD MENU ▲ / ▼ ENTER ANGLE PLAYSTOPSKIP / PAUSE/STEP Place a disc on which DivX ® files have been recorded onto the tray. 1 A file browser screen will appear on thescreen. 2 Press C / D to select file. 3 Press ENTER or PLAY. The selected DivX ® movie will be played back on the screen. Pr...
Page 58 - Setting procedure; Customizing the function settings; RETURN
58 Function setup (DVD) Setting procedure Press SETUP during stop mode. The following on-screen displayappears. 1 2 3 To clear SETUP screen, press SETUP orRETURN. 6 Customizing the function settings You can change the default settings to customize performanceto your preference. ENTER C / D / B / A P...
Page 59 - Setting details
59 Function setup (DVD) Section Option MenuSubtitleAudio E.B.L. TV Screen Display Picture Mode JPEG Interval Screen Saver DRC QSound Parental Password Output DivX(R) VOD Details To select the language of “Menu”, “Subtitle” and“Audio” if more than one language are available onthe disc. To select On o...
Page 60 - TV Screen; Customizing the function settings (Continued)
60 Function setup (DVD) Setting details Menu, Subtitle, Audio You can select the language of “Menu”, “Subtitle” and“Audio” if more than one languages are recorded ontothe disc. English, Francais, Espanol: The selected language will be heard or seen. Other: Other language can be selected (see the“Lan...
Page 61 - JPEG Interval; Picture Mode
61 Function setup (DVD) JPEG Interval You can continuously play back all JPEG filesautomatically.After the setting below, start playing the disc on whichJPEG files have been recorded. Off: Plays back one file at a time. 5 Seconds: Plays back images in the form of a slide show at5 second intervals. 1...
Page 64 - Temporary disabling of rating level by DVD disc
64 Temporary disabling of rating level by DVD disc Depending on the DVD disc, the disc may try to temporarily cancel the ratinglevel that you have set.It is up to you to decide whether to cancel the rating level or not. Load a DVD disc and press PLAY or OPEN/CLOSE on the unit " . Note: This temp...
Page 65 - Language code list
65 Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” 60 . Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919 Afar 1111 Finnish 1619 Lithuanian 2230 Slovak 2921 Afrikaans 1116 French 1628 Macedonian 2321 Slovenian 2922 Albanian 2927 Fri...
Page 66 - Troubleshooting
66 Troubleshooting Before calling a service technician, please check the following table for a possible cause of the symptoms and some solutions. Symptoms Solutions • Make sure the power cord is plugged in.• Try another AC outlet.• Unplug unit, then plug it back in.• Select the DVD or VCR mode befor...
Page 67 - Specifications; General
67 Specifications AC 120 V 60 HzOperation: 18 W, Stand by: 2 W7.7 lbs (3.5 kg)Width: 16-15/16 inches (430.6 mm)Height: 3-9/16 inches (89.7 mm)Depth: 9 inches (228.7 mm)181 channel freq. synthesizedVHF 2-13 UHF 14-69 Cable TV 113 ChannelsUHF/VHF In/Out: 75 Ω coaxial Channel 3 or 4, SwitchableNTSC4 Ro...
Page 68 - Limited warranty; THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER; (1) You must retain your bill of sale or provide other
68 Others Limited warranty Limited United States WarrantyDVD/VCR Combinations - Exchange Warranty Toshiba America Consumer Products, L.L.C. ("TACP") makes the following limited warranties to originalconsumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURC...
Page 69 - (1) For instructions on how to obtain warranty service
69 Others How to Obtain Warranty Services If, after following all of the operating instructions in thismanual and checking the section "Troubleshooting,"you fund that service is needed: (1) For instructions on how to obtain warranty service for exchange program DVD/VCR Combinations,contact T...
Page 70 - Memo
70 Others .....................................................................................................................................................................................................................................................................................................
