Page 2 - SAFETY PRECAUTIONS
2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THISAPPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENTINSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TOQUALIFIED PERSONNEL ONLY. CAUTION: This Digital Video Disc Player employs a Laser System.To en...
Page 3 - SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT; be careful with glass panels or doors on equipment
3 SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet international safetystandards but, like any electrical equipment, care must be taken if you are to obtain thebest results and safety is to be assured. ************** DO read the operating ins...
Page 4 - Precautions
4 Notes on handling When shipping the unit, the original shipping cartonand packing materials come in handy. For maximumprotection, repack the unit as it was originally packedat the factory.Do not use volatile liquids, such as insect spray, nearthe unit. Do not leave rubber or plastic products incon...
Page 5 - On handling discs; On cleaning discs; Structure of disc contents; Notes on copyright; Notes on discs
5 On handling discs Do not touch the playback side of the disc. Do not attach paper or tape to discs. On cleaning discs Fingerprints and dust on the disc cause picture andsound deterioration. Wipe the disc from the centreoutwards with a soft cloth. Always keep the discclean. If you cannot wipe off t...
Page 6 - About this owner’s manual; On VIDEO CDs; Playable discs
6 D I G I T A L V I D E O About this owner’s manual This owner’s manual explains the basic instructionsof this DVD video player. Some DVD video discs areproduced in a manner that allows specific or limitedoperation during playback. As such, the DVD videoplayer may not respond to all operating comman...
Page 7 - Table of contents
7 Playback procedure ............................... 25 Basic playback ................................................ 25Special playback ............................................. 26Locating a chapter or track ............................. 26Picture zoom ...........................................
Page 8 - Identification of controls
8 Front panel Rear panel Identification of controls See the page in for details. OPEN/CLOSE button 25 STOP button 25 Disc tray 25 ON/STANDBY ( ) button 25 SKIP buttons 26 Display window 9 Remote sensor PLAY button Volume knob DVD/FM/AM button 25 25 25 12 SCART OUTPUT socket 14 SUBWOOFER socket 14 AU...
Page 9 - Display window; Video CD
9 Display window The display may vary depending on the types of discs you play. DVD video disc Audio CD Some discs may not display elapsedtime. • During playback: Example • During playback: Example Playing track 7 Video CD • During playback: Example Playing track 1 Some discs may not display tracknu...
Page 10 - Remote control
10 Remote control Identification of controls (continued) The instructions in this manual describe the functions on the remote control. See the page in for details. SETUP button 18 *TV ON/STANDBY button 10 SURROUND button 16 DISPLAY button 31 RDS button 37 SLEEP button 38 PLAYMODE button 28 PROGRESSI...
Page 11 - Operating with the remote control
11 Slide the battery compartment cover in thedirection of the arrow. Install two “R03” batteries (supplied), payingattention to the polarity diagram in the batterycompartment. Replace the compartment cover. Notes on batteries Improper use of batteries may cause battery leakage andcorrosion. To opera...
Page 12 - Connections; Connecting to a TV
12 ■ SCART connection Connect the SCART OUTPUT socket on the unit tothe SCART INPUT socket on the TV using suppliedscart lead. Note: If your TV is RGB compatible, slide the VIDEOOUTPUT selector to left side for better picturequality. ■ Video connection Connect the AUDIO (L/R) and VIDEO OUTPUTsockets...
Page 13 - Connecting to optional equipment
13 You can also enjoy high quality dynamic sounds of an optional equipment by connecting with this unit. • The OPTICAL IN and COAXIAL IN sockets are belong to LINE IN 1 input. If you connect the DVD player using a Optical lead or Coaxial lead, the Video lead must be connected to LINEIN1 VIDEO INPUT ...
Page 14 - Speaker system connection; Speaker position
14 Speaker system connection Remove mains plug first and set the volume knob to low initially before connecting. Connect the speakers usingthe supplied speaker leads by matching the colours of the terminals and those of the leads. To obtain the bestpossible surround sound, adjust the speaker paramet...
Page 15 - Audio setup; Tone control
15 Audio setup Tone control Bass boost setting You can set bass boost effect on or off. You can change the sound quality by adjusting thebass and treble. 1 2 Press TONE in DVD mode. The “Tone” screen appears. Press C or D to select “Bass” or “Treble”, then press B or A to adjust the sound level. Bas...
Page 16 - Selecting surround mode
16 Selecting surround mode Press SURROUND or RETURN to close the “Surround” screen. Press SURROUND in DVD mode. The “Surround” screen appears. Press A or ENTER , and press C or D to select “Auto”, “PLII” or “2 Channel”, thenpress ENTER . You can also select surround mode in FM/AM orexternal input mo...
Page 17 - Speaker setup
17 You may adjust speaker volume balance and delay time according to your listening position. Speaker setup D F D C D R D R D F It is hopeful that the interval from the listener to each speakers is same to get the best sound quality. If not, you can adjust the delay time so that the sounds from spea...
Page 18 - DVD setup; Setting OSD language; Setting Menu language
18 DVD setup When each setup function (page 18 ~ 24) has been completed, the unit can always be operated under the sameconditions (especially with DVD discs).Each setup command will be retained in the memory even if you turn the power off. Setting OSD language If the unit does not operate properly: ...
Page 21 - Setting JPEG Interval; Setting Select Files
21 Setting JPEG Interval Press SETUP in the stop mode. Press b b b b b or a a a a a to select “Picture”, then press 5 5 5 5 5 or ENTER . 1 2 Press 4 4 4 4 4 or 5 5 5 5 5 to select “JPEG Interval”. 3 Press a a a a a or ENTER , then press 4 4 4 4 4 or 5 5 5 5 5 to select your desired time. Tv ScreenDi...
Page 22 - Line1 Select
22 DRC (Dynamic Range Control) enables you to controlthe dynamic range so as to achieve a suitable sound foryour equipment. Dynamic Range Control (DRC) Line1 Select If you connect an another unit (DVD, VCR or etc.) tothe LINE IN1 sockets, you must select the type ofaudio input. Press SETUP in the st...
Page 24 - Language code list
24 Language Name Code Language Name Code Language Name Code Language Name Code Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919 Afar 1111 Finnish 1619 Lithuanian 2230 Slovak 2921 Afrikaans 1116 French 1628 Macedonian 2321 Slovenian 2922 Albanian 2927 Frisian 1635 Malagasy 2317 Somali 2925 Amhar...
Page 25 - Playback procedure; Basic playback
25 Playback procedure Basic playback Place a disc onto the disc tray.Hold the disc, position it with the printed labelside up, align it with the guides, and place it inits proper position. Preparation: • Turn ON the TV and select to the corresponding video input. 1 Press ( ON/STANDBY ). (If the unit...
Page 26 - Special playback; Review playback; Picture zoom; Frame advance
26 Special playback Note: There may be a slight delay between you pressing the button and the function activating. Press SEARCH + during normal playback. Each press of SEARCH + will increase the speed of the search , , , . Review playback Press SEARCH – during normal playback. Each press of SEARCH –...
Page 27 - Marking the scenes; To cancel the mark; Locating desired scene
27 Press MARKER during playback. Select the blank Marker using / . Then press ENTER at the desired scene. Press MARKER to remove this display. Marker 2 Marker 1 Marker 3 /Enter/Cancel/Marker 27 00 54 The unit stores the points that you want to watch again upto 3 points. You can resume playback from ...
Page 28 - Off; DVD
28 A-B Repeat playback A-B repeat playback allows you to repeat materialbetween two selected points. Notes: • In A-B Repeat mode, subtitles near the A or B locations may not be displayed. • You can not set the A-B Repeat for the scenes that in- clude multiple angles. • You may not be able to set A-B...
Page 29 - Programme playback
29 Press / to select “Play Mode”, then press / or ENTER to select “Program”. • To programme others, repeat step 3.• If you input a wrong number, press CANCEL . Press / or / to select “Program Playback” and press ENTER . The programmes in the order you selected willstart playback.• In case of JPEG fi...
Page 30 - Changing soundtrack language; Subtitles
30 Two or more titles may be recorded on some discs. If atitle menu is recorded on the disc, you can select thedesired title. Title selection Press TOP MENU during playback. Title menu appears on the screen. Press / or / to select the desired title. 1 2 3 Press ENTER or PLAY . The playback of the se...
Page 31 - Disc Status
31 With each press of DISPLAY , the status of the disc will appear on the screen and change as follows. To make status display disappear, press DISPLAY again. When you playback the CD disc, the status displaywill appear on the screen and continue displaying. DVD AUDIO CD VIDEO CD 00:34:56 01:12:33 0...
Page 32 - Limitations on display
32 MP3/WMA/JPEG CD information Limitations on MP3/WMA/JPEG CD playback • MP3/WMA/JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digits extension letters, “mp3”, “wma”, “jpg”. • MP3/WMA/JPEG CD must be correspond to the ISO standardized files.• This unit can read 20...
Page 34 - JPEG CD playback
34 The slide show enables you to view pictures (files) oneafter another automatically. Preparation: • Set “JPEG Interval” setting to “5 Seconds”, “10 Sec- onds” or “15 Seconds” (see page 21). Place a disc on which JPEG files have beenrecorded onto the tray. 1 A file menu screen will appear on the sc...
Page 35 - Selecting progressive scan; Progressive scan
35 Selecting progressive scan 1 The progressive scan capability provides the highest resolution pictures with less flicker and line structure.If you are using the Component video sockets, but are connecting the unit to a standard (analog) television, setPROGRESSIVE to Off.If you are using the Compon...
Page 36 - Radio operation; Presetting the radio stations
36 Manual presetting 1. Tune the station to be preset as described in “Au- tomatic/Manual tuning”. 2. Press SETUP . “M. PRESET” appears on the win- dow display, then the preset position number blinks. 3. Press PRESET + or – to select the position num- ber to be preset. 4. Press ENTER . The preset po...
Page 37 - Listening to the radio
37 Press PRESET + or – to select the desired position number. You can also select the desired position num-ber using the number buttons (0–9) , then press ENTER . • For example, to select the preset position number 7, press 0 and 7 , then press ENTER . To select the preset position number 25, press ...
Page 38 - Other functions
38 Other functions Press MUTE to mute your unit. You can mute your unit in order, for example, toanswer the telephone, “MUTE” indicator appearson the display window. Connect a stereo headphone plug (ø 3.5mm) intothe HEADPHONE socket on the rear panel.The speakers are automatically disconnectedwhen y...
Page 39 - Before calling service personnel; Contact for technical assistance
39 Check the following guide for the possible cause of a problem before contacting service. Before calling service personnel Symptom No power. No picture. No sound. The playback picture hasoccasional distortion. The DVD video player doesnot start playback. Playback does not follow thecourse of the d...
Page 40 - Specifications
40 *J2D20401A* Specifications 230 V~AC 50 HzOperation: 20 W, Stand by: 4 W3.5 kgWidth: 430 mm, Height: 61.5 mm, Depth: 290 mmFM (STEREO), AM (MONO)FM 87.5~108.0 MHz, AM 522~1611 KHzPAL, NTSCDVD (12 cm, 8 cm), CD (12 cm, 8 cm)DVD: 4 Hz-22 kHz, CD: 4 Hz-20 kHzMore then 90dBLess than 0.3%Less than 0.01...
