Toshiba PT321U - Manual

6 5.375 x 8.375 ver 2.3 In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does...

7 5.375 x 8.375 ver 2.3 3 The standard connecting arrangement (telephone jack type) for this equipment is jack type(s): USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequenc...

8 5.375 x 8.375 ver 2.3 Wireless LAN and Your Health Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for example...

10 5.375 x 8.375 ver 2.3 EU Declaration of Conformity TOSHIBA declares that this product conforms to the following Standards: This product is carrying the CE-Mark in accordance with the related European Directives. The party responsible for CE-Marking is TOSHIBA Europe GmbH, Hammfelddamm 8, 41460 Ne...

11 5.375 x 8.375 ver 2.3 VCCI Class B Information Modem Warning Notice This information is only applicable if your computer has a modem. Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan-European single terminal connection to the Public Switched Telephone ...

12 5.375 x 8.375 ver 2.3 Using this Equipment in Japan In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for second generation low-power data communication systems such as this equipment overlaps that of mobile object identification systems (premises radio station and specified low-power...

13 5.375 x 8.375 ver 2.3 The indication shown below appears on this equipment. 1 2.4: This equipment uses a frequency of 2.4 GHz. 2 FH: This equipment uses FH-SS modulation. 3 The interference range of this equipment is less than 10m. 4 This equipment uses a frequency bandwidth from 2,400 MHz to 2,4...

14 5.375 x 8.375 ver 2.3 Radio Approvals for Wireless Devices The following information is dependent on what type of wireless device is in your computer. Not all devices are available on all models. Approved Countries/Regions for the Intel ® Wireless Wi-Fi ® Link 5100/5300 Series This equipment is a...

16 5.375 x 8.375 ver 2.3 Approved Countries/Regions for the Atheros ® Wireless Wi-Fi ® Link AR5B95 Series This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Argent...

19 5.375 x 8.375 ver 2.3 Approved Countries/Regions for the Realtek ® RTL8192E This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Argentina Australia Austria Azerb...

23 5.375 x 8.375 ver 2.3 Bluetooth ® Wireless Technology Interoperability Bluetooth ® Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖ Bluetooth S...

24 5.375 x 8.375 ver 2.3 Approved Countries/Regions for use ( Bluetooth ® wireless technology) Bluetooth ® Card from Toshiba equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. ...

25 5.375 x 8.375 ver 2.3 Bluetooth ® Wireless Technology and Your Health The products with Bluetooth ® wireless technology, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by devices with Bluetooth wireless technology however is much less than the e...

26 5.375 x 8.375 ver 2.3 Regulatory statements This product complies with any mandatory product specification in any country/region where the product is sold. In addition, the product complies with the following: European Union (EU) and EFTA This equipment complies with the R&TTE directive 1999/...

27 5.375 x 8.375 ver 2.3 Optical Disc Drive Safety Instructions This appliance contains a laser system and is classified as a CLASS 1 LASER PRODUCT. To use this model properly, read the User’s Guide carefully and keep it for your future reference. Never attempt to disassemble, adjust or repair an op...

30 5.375 x 8.375 ver 2.3 Contents Introduction................................................................................ 37 This guide ...............................................................39Safety icons ............................................................40 Other icons used ....

31 Contents 5.375 x 8.375 ver 2.3 Turning on the power .......................................50Setting up your software ...................................50 Registering your computer with Toshiba ................51Adding optional external devices.............................51Adding memory (option...

32 Contents 5.375 x 8.375 ver 2.3 Connecting a printer ...............................................88 Setting up a printer ...........................................89 Turning off the computer ........................................89 Options for turning off the computer ................90Using...

35 Contents 5.375 x 8.375 ver 2.3 TOSHIBA eco Utility™ ...........................................166TOSHIBA wireless LAN indicator ..........................167TOSHIBA Service Station ......................................168TOSHIBA PC Health Monitor .................................168 Chapter 6: ...

37 5.375 x 8.375 ver 2.3 Introduction Welcome to the world of powerful, portable, multimedia computing. With your Toshiba computer, your work and entertainment can accompany you wherever you go. Your computer model may be ENERGY STAR ® qualified. If the model you purchased is qualified, it is labele...

39 Introduction This guide 5.375 x 8.375 ver 2.3 The product specifications and configuration information are designed for a product Series. Your particular model may not have all the features and specifications listed or illustrated. For more detailed information about the features and specificatio...

40 Introduction Safety icons 5.375 x 8.375 ver 2.3 Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the ser...

41 Introduction Other documentation 5.375 x 8.375 ver 2.3 Your computer’s features and specifications Certain computer chassis are designed to accommodate all possible configurations for an entire product Series. Your select model may not have all the features and specifications corresponding to all...

42 Chapter 1 Getting Started This chapter provides tips for using your computer effectively, summarizes how to connect components, and explains what to do the first time you use your computer. The “Instruction Manual for Safety and Comfort,” that is shipped with your computer, contains important saf...

43 Getting Started Selecting a place to work To keep your computer in prime operating condition, protect your work area from: ❖ Dust, moisture, and direct sunlight. ❖ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the compu...

45 Getting Started Setting up your computer Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. Always make sure your computer and AC adaptor have adequate ventilation and are protected from overhe...

46 Getting Started Connecting to a power source Please handle your computer carefully to avoid scratching or damaging the surface. Connecting to a power source Your computer requires power to operate. Use the power cord/cable and AC adaptor to connect the computer to a live electrical outlet, or to ...

48 Getting Started Charging the main battery ❖ Flashes amber when the main battery charge is low and it is time to recharge the main battery or plug in the AC adaptor If the AC power light flashes amber during charging, either the main battery is malfunctioning, or it is not receiving correct input ...

49 Getting Started Using the computer for the first time Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel 1 Facing the front of the computer, locate the center of the display panel. 2 Gently raise the panel. 3 Adjust ...

50 Getting Started Using the computer for the first time Turning on the power To turn on the computer: 1 Make sure any external devices (such as the AC adaptor, if you plan to use AC power rather than battery power) are properly connected and ready. 2 Check to ensure that all drives and slots are em...

51 Getting Started Registering your computer with Toshiba Registering your computer with Toshiba Product registration is strongly recommended, and allows Toshiba to send you periodic updates, announcements, and special offers applicable to your product. Product registration can be completed by eithe...

52 Getting Started Adding memory (optional) Adding memory (optional) HINT: To purchase additional memory modules, see the accessories information packaged with your system or visit accessories.toshiba.com . Your computer comes with enough memory to run most of today’s popular applications. You may w...

59 Getting Started Adding memory (optional) 18 Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. You can now continue setting up the computer. When the operating system has loaded, you can verify that the computer has recognized the ad...

62 Getting Started Recovering the Internal Storage Drive TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. Checking total memory When you add or remove a memory module, you can check that the computer has recognized the change. To do this: ❖ Click Start , C...

66 Getting Started Recovering the Internal Storage Drive 7 The Recovery of Factory Default Software screen appears. Select Recover to out-of-box state . (Sample Image) Recovery of Factory Default Software screen 8 Click Next . A confirmation message displays reminding you that all data will be lost ...

72 Getting Started Recovering the Internal Storage Drive 9 Click Next to begin the recovery. When the recovery process is complete, a message displays, indicating that the C: drive has been recovered. 10 Click Finish to restart the computer. Recovering to a custom size partition Recovering to a cust...

74 Getting Started Recovering the Internal Storage Drive 7 The Recovery of Factory Default Software screen appears. Select Recover to a custom size partition . (Sample Image) Recovery of Factory Default Software screen 8 Use the on-screen arrow buttons in The size of drive C: field to set the partit...

76 Getting Started Recovering the Internal Storage Drive 4 Do one of the following: ❖ If you are copying files to DVD, insert a blank DVD into the optical disc drive. ❖ If you are copying files to a USB flash drive, connect a USB flash drive of the required minimum capacity (as specified in the TOSH...

78 Getting Started Erasing the Internal Storage Drive 7 Select one of the following options: ❖ Recover to out-of-box state (recommended recovery method)—If you want to recover the original factory image ❖ Recovery of factory default software with user’s data —If you want to the recovery the factory ...

80 Getting Started Checking the internal storage drive operating status 4 Click Next . A confirmation message displays reminding you that all data on the internal storage drive will be lost. Be sure you have saved your work to external media (see “Backing up your work” on page 112 ) and created reco...

81 Getting Started Using the touch pad Using the touch pad Some of the touch pad operations described in this section are only supported in certain applications. You can use the touch pad (the small, touch-sensitive area in front of the keyboard) and the adjacent control buttons to: ❖ Move the point...

84 Getting Started Using the touch pad Adjusting touch pad settings While you are typing, the on-screen pointer may seem to move or jump around “by itself” to random locations on the screen. The on-screen pointer may also seem to automatically select text, click buttons, and activate other user inte...

85 Getting Started Using external display devices Using external display devices Your computer comes with a built-in display, but you can also connect the following types of external display devices to the video ports described below: ❖ An HDMI™-compatible television or external display device via t...

86 Getting Started Using external display devices Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen. To do this: 1 Read the directions that came with the monitor to see if you first need to install new soft...

87 Getting Started Using an external keyboard ❖ Built-in display and TV (or other external video device) ❖ TV (or other external video device) ❖ External monitor and TV ❖ Built-in display and external monitor (extended mode) ❖ Built-in display and TV (extended mode) ❖ External monitor and TV (extend...

88 Getting Started Connecting a printer Connecting a printer Your printer documentation may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not functio...

89 Getting Started Turning off the computer Setting up a printer Some printers require a specific installation process. Refer to your printer installation guide for instructions before completing the following procedure. If your printer does not support Plug and Play, follow these steps to set it up...

90 Getting Started Turning off the computer Options for turning off the computer Depending on the operating system installed, you have more than one option available for turning off the computer: Shut down, Hibernate, and Sleep. Each option has its advantages. ❖ Use the Shut down or Hibernate comman...

91 Getting Started Turning off the computer ❖ When starting up again, the computer returns to the state in which you left it, including all open programs and files you were using. For information on how to use and configure Hibernation mode see “Using and configuring Hibernation mode” on page 94 . S...

92 Getting Started Turning off the computer Using the Shut down command The Shut down command completely shuts down the computer without saving your work or the current state of the computer. This command closes all open programs, shuts down the operating system, and then turns off your computer. To...

94 Getting Started Turning off the computer These options can be set separately for how they operate while the computer is running on battery power or while connected to AC power. ❖ Lid close action Set this option to Shut down if you want the computer to shut down when you close the display panel. ...

95 Getting Started Turning off the computer 2 Click Hibernate in the pop-up menu. The computer saves the state of all open programs and files, turns off the display, and then turns off. Configuring Hibernation mode options You can place the computer into Hibernation mode by either pressing the power...

97 Getting Started Turning off the computer Starting again from Hibernation mode To start up the computer from Hibernation mode, press the power button until the ON/OFF light glows white. The computer returns to the screen(s) you were using. If you put the computer in Hibernation mode by closing the...

100 Getting Started Customizing your computer’s settings Starting again from Sleep mode To start up the computer from Sleep mode, press the power button until the ON/OFF light glows white. The computer returns to the screen(s) you were using. If you place the computer in Sleep mode by closing the di...

101 Getting Started Caring for your computer Moving the computer Before moving your computer, even across the room, make sure all drive activity has ended (the internal storage drive and optical disc drive indicator lights stop glowing) and all external peripheral cables are disconnected. Do not pic...

102 Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the internal storage drive. If the network you are usi...

103 Learning the Basics Using the keyboard ❖ Use Error-checking and Disk Defragmenter regularly to check and optimize disk space and improve performance. ❖ Scan all new files for viruses. This precaution is especially important for files you receive via external media, email, or download from the In...

104 Learning the Basics Using the keyboard L750, L770 series keyboards To capture a print screen of the entire screen, press the Fn + PRTSC key. To capture only the active window displayed, press Fn + ALT while simultaneously pressing the PRTSC key. (Sample Illustration) PRTSC key on the keyboard Ch...

105 Learning the Basics Using the keyboard Ctrl, Fn, and Alt keys (Sample Illustration) Ctrl, Fn, and Alt keys The Ctrl , Fn , and Alt keys do different things depending on the program you are using. For more information, see your program documentation. Function keys The function keys (not to be con...

106 Learning the Basics Using the keyboard Overlay keys This section applies to the L730/L740 series. The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay. This overlay lets you enter numeric data or control the cursor as you would using the 10-key keypad o...

107 Learning the Basics Starting a program Using the overlay for cursor control This section applies to the L730/L740 series. The keys with the gray arrows and symbols on their left front are the cursor control overlay keys. To turn the cursor control overlay on, press Fn and F10 simultaneously. The...

108 Learning the Basics Starting a program 2 Click the program group, in this example, Accessories . The Accessories menu is displayed. 3 Click the program, in this example, WordPad . WordPad opens. To close the program, click the Close button in the upper-right corner of the program’s window. Start...

109 Learning the Basics Saving your work Starting a program using the Search programs and files field This example uses the Start menu’s Search programs and files field to start WordPad: 1 Click Start to display the Start menu. The Search programs and files field appears at the bottom of the Start m...

110 Learning the Basics Saving your work Saving files 1 Click on the arrow in the upper-left corner of your Windows ® -based application to display the drop-down menu, and then click Save . If you are working with a document that already has a file name, this is all you need to do. If you created a ...

111 Learning the Basics Printing your work Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format. For example, Microsoft ® Word saves files with a .doc/.docx extension. Any file name with an extensi...

112 Learning the Basics Backing up your work 3 Specify the print parameters. For example, the range of pages and number of copies to print. 4 Click Print . Backing up your work Back up all the files you create in case something happens to your computer. You can back up your files to different types ...

113 Learning the Basics Using the optical disc drive TECHNICAL NOTE: When restoring files, the backup program prompts you if you try to overwrite a file that already exists on the internal storage drive. Make sure the backup version is the one you want before overwriting the existing file. Using the...

115 Learning the Basics Using the optical disc drive Optical disc drive components The optical disc drive is located on the side of the computer. Your optical disc drive may look like this: (Sample Illustration) Optical disc drive Drive in-use indicator light —Indicates when the drive is in use. Eje...

117 Learning the Basics Using the optical disc drive If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. 9 Push the disc tray in by pressing gently on the center of the tray until it clicks into place. You are ready to use the disc. Play...

118 Learning the Basics Using the optical disc drive For more information regarding supported optical media formats please refer to your computer’s detailed specifications at pcsupport.toshiba.com . Due to manufacturing and quality variations in third party optical media (e.g., CD or DVD) or optical...

119 Learning the Basics Toshiba’s online resources Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it. 2 Pull the tray out until it is fully open, remove the disc, and place it in its protective cover. 3 Gently press the tray in to close ...

120 Chapter 3 Mobile Computing This chapter covers all aspects of using your computer while traveling. Toshiba’s energy-saver design Your computer enters a low-power suspension mode when it is not being used, thereby conserving energy and saving money in the process. It has a number of other feature...

121 Mobile Computing Running the computer on battery power Battery Notice Battery life rating is for comparison purposes only, and does not indicate the battery life that will be obtained by any individual user. Actual battery life may vary considerably from specifications depending on product model...

122 Mobile Computing Charging batteries TECHNICAL NOTE: Depending on your system, the RTC battery may only charge while the computer is turned on. Power management Your computer ships with the power management options preset to a configuration that will provide the most stable operating environment ...

123 Mobile Computing Charging batteries Charging the main battery To charge the main battery while it is in your computer, plug the computer into a live electrical outlet. The battery charges whether the computer is on or off. TECHNICAL NOTE: The recharging of the battery cannot occur when your comp...

124 Mobile Computing Monitoring main battery power To recharge the RTC battery, plug the computer into a live electrical outlet and leave the computer powered on for 24 hours. It is seldom necessary to charge the RTC battery because it charges while the computer is on. If the RTC battery is low, the...

125 Mobile Computing Monitoring main battery power HINT: Be careful not to confuse the battery light ( ) with the ON/OFF light ( ). When the ON/OFF light flashes amber, it indicates that the system is suspended (using the Windows ® operating system Sleep command). (Sample Illustration) Power and bat...

126 Mobile Computing Monitoring main battery power TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The computer calculates the remaining battery charge based on your cur...

127 Mobile Computing Monitoring main battery power 3 Click Change advanced power settings . The Advanced settings tab of the Power Options window appears. 4 Double-click Battery to display the battery options. (Sample Image) Advanced settings tab of Power Options screen 5 Configure the alarm setting...

128 Mobile Computing Monitoring main battery power Microsoft ® has combined these options into preset Power Plans. Using one of these power plans lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs. The fo...

129 Mobile Computing Monitoring main battery power 5 Click Change advanced power settings to access settings for battery notification levels, internal storage drive power save time, etc. You can click on the plus signs to expand each item and to see what settings are available for each item. 6 Click...

130 Mobile Computing Changing the main battery Changing the main battery When your main battery has run out of power, you have two options: plug in the AC adaptor or install a charged main battery. Never short circuit the battery pack by either accidentally or intentionally bringing the battery term...

132 Mobile Computing Changing the main battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations. Put insulating tape, such as cellophane tap...

133 Mobile Computing Taking care of your battery 3 Slide the battery release lock to the locked position. (Sample Illustration) Locking the battery release lock 4 Turn the computer right side up. 5 Reconnect any cables that were removed in step 3 of “Removing the battery from the computer” on page 1...

134 Mobile Computing Taking care of your battery ❖ Do not incinerate a spent battery, as this could cause it to explode and release caustic liquid. ❖ If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use ...

135 Mobile Computing Disposing of used batteries ❖ If you will not be using the system for an extended period, more than one month, remove the battery pack. ❖ If you are not going to use the computer for more than eight hours, disconnect the AC adaptor. ❖ Store spare battery packs in a cool dry plac...

136 Mobile Computing Traveling tips Toshiba is dedicated to preserving the environment by sponsoring Call2Recycle™ , a program of the Rechargeable Battery Recycling Corporation. For more information and for drop-off locations, visit www.rbrc.org or call 1-800-822-8837. Notice regarding CR coin cell ...

137 Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your computer. Exploring the desktop The desktop is the launching pad for everything you can do in the Windows ® operating system. You can use its features to start programs, find docum...

138 Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, notification area, and background pattern. (Sample Image) Windows ® operating system desktop Icons An icon repres...

140 Exploring Your Computer’s Features Setting up for communications Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly swit...

141 Exploring Your Computer’s Features Setting up for communications For information on how to set up a wireless connection, refer to your wireless networking device documentation or your network administrator. To enable or disable wireless communication, use the Hot Key Fn + F8 . For more informati...

142 Exploring Your Computer’s Features Exploring audio features Exploring audio features You can use your computer to record sounds using the computer’s internal microphone (available on certain models) or an optional external microphone. You can listen to sound files or audio CDs using the built-in...

143 Exploring Your Computer’s Features Using the Web Camera TECHNICAL NOTE: When using amplified speakers, use speakers that require an external power source. Other types of speakers will be inadequate to produce sound from the computer. To play back sound files through external speakers or headphon...

144 Exploring Your Computer’s Features Using the Memory card reader Using the Memory card reader (Available on certain models.) The Memory card reader supports the use of Memory Stick ® , Memory Stick PRO™, Memory Stick PRO Duo™, Secure Digital™ (SD™), or MMC ® (MultiMediaCard ® ) media. These media...

145 Exploring Your Computer’s Features Using the Memory card reader When inserting memory media, do not touch the metal contacts. You could expose the storage area to static electricity, which can destroy data. Removing memory media 1 Prepare the card for removal by clicking on the Show hidden icons...

146 Chapter 5 Utilities Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to ascertain certain system details, set additional options, or change default options. These utilities are described in this...

147 Utilities TOSHIBA Assist ❖ TOSHIBA eco Utility™ ❖ TOSHIBA wireless LAN indicator ❖ TOSHIBA Service Station ❖ TOSHIBA PC Health Monitor TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist,...

148 Utilities TOSHIBA Assist Connect The feature available in this category is: ❖ Bluetooth ® Settings (Sample Image) TOSHIBA Assist window – Connect tab

149 Utilities TOSHIBA Assist Secure The features available in this category are: ❖ Supervisor password ❖ User password (Sample Image) TOSHIBA Assist window – Secure tab

151 Utilities TOSHIBA Assist Optimize The features available in this category are: ❖ Mouse Utility ❖ TOSHIBA Hardware Setup (Hardware Settings) ❖ TOSHIBA Accessibility ❖ TOSHIBA Face Recognition Utility ❖ TOSHIBA Sleep Utility ❖ TOSHIBA eco Utility™ (Sample Image) TOSHIBA Assist window – Optimize ta...

152 Utilities TOSHIBA Application Installer TOSHIBA Application Installer The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications: 1 Click Start , All Programs , My Toshiba , and the...

153 Utilities Setting passwords Setting passwords Setting a password lets you walk away from your computer while providing additional protection for your files. When you set a password, you must enter the password before you can work on your computer again. TOSHIBA supports several types of password...

154 Utilities Setting passwords Using a supervisor password A supervisor password prevents other users from changing hardware configuration options. Setting a supervisor password If you choose to set a supervisor or user password, TOSHIBA strongly recommends that you save your password in a location...

155 Utilities Setting passwords 6 Click OK . The supervisor password utility dialog box appears. 7 Select Able to run HWSetup or Unable to run HWSetup and then Click OK . 8 Restart the system to complete the process. Deleting a supervisor password To delete a supervisor password: 1 Click Start , All...

156 Utilities Setting passwords To register a password for the power-on password functions: 1 Click Start , All Programs , TOSHIBA , Utilities , and then TOSHIBA Assist . The TOSHIBA Assist window appears. 2 On the left side, click the Secure tab. 3 Click the User Password icon. 4 Click Registered ....

157 Utilities TOSHIBA Face Recognition Utility TOSHIBA Face Recognition Utility Your computer may come with the TOSHIBA Face Recognition utility. This utility provides another way to log on to your computer. For high security purposes, TOSHIBA Face Recognition is not a suitable substitute for Window...

158 Utilities TOSHIBA PC Diagnostic Tool Utility TOSHIBA PC Diagnostic Tool Utility This utility can help diagnose problems with devices in your computer. Refer to the online Help documentation within the application for additional help. The TOSHIBA PC Diagnostic Tool utility may show tests for feat...

159 Utilities Mouse Utility Mouse Utility The Mouse utility allows you to change your pointing device or mouse settings. To access the Mouse utility: 1 Click Start , Control Panel , Hardware and Sound , and then under Devices and Printers , click Mouse , or click the Mouse icon in the Optimize tab o...

160 Utilities TOSHIBA Hardware Setup TOSHIBA Hardware Setup TOSHIBA Hardware Setup is the TOSHIBA configuration management tool available through the Windows ® operating system. To access it: ❖ Click Start , All Programs , TOSHIBA , Utilities , and then HWSetup , or click the TOSHIBA Hardware Settin...

162 Utilities TOSHIBA Sleep Utility TOSHIBA Sleep Utility This utility displays whether the “USB Sleep and Charge function” is enabled or disabled and shows the position of the USB port that supports the “USB Sleep and Charge function.” It also displays the remaining battery capacity. Starting the T...

164 Utilities TOSHIBA Sleep Utility Enabling/Disabling USB Sleep and Charge This utility can be used to enable or disable the USB Sleep and Charge function. To enable this function, select the Enable USB Sleep and Charge check box in the utility. To disable this function, de-select the check box. Yo...

165 Utilities TOSHIBA Accessibility With certain external devices, the USB Sleep and Charge function may not work no matter which charging mode you select. In those cases, disable USB Sleep and Charge in the utility and turn the computer on to charge the device, or use a different charging device. T...

166 Utilities TOSHIBA eco Utility™ TOSHIBA eco Utility™ The TOSHIBA eco Utility™ monitors your power savings from using the eco power plan by tracking real-time power consumption and accumulated savings over time. To access the TOSHIBA eco Utility™, do one of the following: ❖ Click Start , All Progr...

167 Utilities TOSHIBA wireless LAN indicator TOSHIBA wireless LAN indicator (Available on certain models.) The TOSHIBA wireless LAN indicator allows you to view the networks you are currently connected to. To access the list of connected networks, before logging in, click on the TOSHIBA wireless LAN...

168 Utilities TOSHIBA Service Station TOSHIBA Service Station The TOSHIBA Service Station helps you keep your new computer running at its best by notifying you when updated software, firmware, documentation or other information is available for your computer. The TOSHIBA Service Station will alert y...

169 Utilities TOSHIBA PC Health Monitor You may disable the TOSHIBA PC Health Monitor at any time by uninstalling the software via the Windows ® Control Panel. Doing so will automatically delete all collected information from the internal storage drive. The TOSHIBA PC Health Monitor software does no...

170 Chapter 6 If Something Goes Wrong Some problems you may encounter when using your computer are relatively easy to identify and solve. Others may require help from your network administrator or the manufacturer of the software program. This chapter aims to help you solve many problems by yourself...

171 If Something Goes Wrong Problems when you turn on the computer 2 Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. 3 Select the program you want to close, then click End Task . Closing the failed program should allow y...

172 If Something Goes Wrong Problems when you turn on the computer The computer displays the WARNING RESUME FAILURE/Windows Error Recovery – Windows did not shut down successfully message. To continue, select Start Windows normally . This can happen if the computer was put into Sleep mode and the ba...

173 If Something Goes Wrong The Windows ® operating system is not working If the trickle-charging does not prove effective, visit the Toshiba Web site at pcsupport.toshiba.com and see the Support Bulletin Step-Charging the computer’s battery (click the Ask Iris ® link and search for the support bull...

174 If Something Goes Wrong The Windows ® operating system is not working ❖ The operating system responds differently from the normal routine. ❖ The screen does not look right. Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new...

175 If Something Goes Wrong The Windows ® operating system is not working If your computer is connected to a network, the Startup menu may display different versions of Safe mode. Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the ...

176 If Something Goes Wrong Fixing a problem with Device Manager Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device. Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable. ...

177 If Something Goes Wrong Memory problems Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be hardware or even software related. It is worthwhile checking for these first: 1 Click Start , and then click the Shut down button in the lower-right corner of t...

179 If Something Goes Wrong Keyboard problems Keyboard problems L750/L770 series keyboard To capture a print screen of the entire screen, press the Fn + PRTSC key. To capture only the active window displayed, press Fn + ALT while simultaneously pressing the PRTSC key. If, while typing, strange thing...

180 If Something Goes Wrong Display problems Fn and F5 simultaneously again to return the display priority to its previous setting. HINT: Holding the Fn key and pressing the F5 key several times will advance you through the display options. If you are using an external monitor: ❖ Check that the moni...

181 If Something Goes Wrong Disk or storage drive problems The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work ...

182 If Something Goes Wrong Optical disc drive problems 4 Click the Tools tab. 5 Click the Check now... button. The Check Disk box appears. 6 You can choose one or both options: ❖ Automatically fix file system errors ❖ Scan for and attempt recovery of bad sectors 7 Click Start . Error-checking tests...

183 If Something Goes Wrong Optical disc drive problems You press the disc eject button, but the drive tray does not slide out. Make sure the computer is connected to a power source and turned on. The optical disc drive eject mechanism requires power to operate. Make sure a program is not accessing ...

185 If Something Goes Wrong Sound system problems Sound system problems No sound is coming from the computer’s speakers. Adjust the volume control. Try pressing Fn + Esc to see if volume mute is disabled. Check that the volume control on the computer is turned up. If you are using external headphone...

186 If Something Goes Wrong Wireless networking problems The printer will not print what you see on the screen. Many programs display information on the screen differently from the way they print it. See if your program has a print preview mode. This mode lets you see your work exactly as it will pr...

188 If Something Goes Wrong DVD and Blu-ray Disc™ operating problems DVD and Blu-ray Disc™ operating problems If you experience a problem playing DVDs or Blu-ray™ Discs, you may be able to fix the problem yourself. For general problems playing a DVD or Blu-ray Disc™ title, try the following steps: 1...

189 If Something Goes Wrong Develop good computing habits 3 Select None from the Screen saver drop-down list. 4 Click OK . Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many softwa...

190 If Something Goes Wrong Develop good computing habits Data and system configuration backup in the Windows ® operating system The Windows ® operating system offers some easy-to-use features for backing up your Windows ® settings and your data - documents and other important files. Take advantage ...

191 If Something Goes Wrong Develop good computing habits Then, at a later time, you can re-establish your Windows ® configuration using the saved restore point. To do this: 1 Click Start , All Programs , Accessories , System Tools , and then System Restore . 2 Select Recommended restore or Choose a...

192 If Something Goes Wrong Develop good computing habits Follow these steps to back up your computer or files to optical discs, or a storage drive: You cannot back up the computer while running on battery power. Connect the AC adaptor before continuing. 1 Prepare your backup target by connecting it...

193 If Something Goes Wrong Develop good computing habits ❖ Restart the Windows ® operating system. Always restart the Windows ® operating system after each installation, even if the installation utility does not prompt you to do so. This will ensure that the installation is completed, and will clea...

194 If Something Goes Wrong If you need further assistance ❖ The USB Sleep and Charge function may not work with certain external devices even if they are compliant with the USB specification. In those cases, power on the computer to charge the device or use a different charging device. The “USB Wak...

195 If Something Goes Wrong Other Toshiba Internet Web sites Contacting Toshiba If you still need help and suspect that the problem is hardware-related, Toshiba offers a variety of resources to help you. Toshiba’s Technical Support Web site For technical support, or to stay current on the most recen...

196 If Something Goes Wrong Toshiba’s worldwide offices Toshiba’s worldwide offices acclaim.toshiba.com Toshiba USA Self-Service support web site laptopforums.toshiba.com Community discussion forums for Toshiba laptop users Australia Toshiba (Australia) Pty. Limited84-92 Talavera RoadNorth Ryde NSW ...

198 5.375 x 8.375 ver 2.3 Appendix A Hot Keys/TOSHIBA Cards Hot keys and TOSHIBA Cards provide a quick way to modify selected system functions and to launch applications. Hot Key Cards The Hot Key Cards are used to set or modify the following system functions: ❖ Mute ❖ Lock (Instant security) ❖ Powe...

199 Hot Keys/TOSHIBA Cards Hot key functions 5.375 x 8.375 ver 2.3 Using the Hot Key Cards The Hot Key Cards are normally hidden from view. The Cards appear when you press the Fn key. Hot keys are keys that, when pressed in combination with the Fn key, turn system functions on and off. Hot keys have...

200 Hot Keys/TOSHIBA Cards Hot key functions 5.375 x 8.375 ver 2.3 Volume Mute or Fn + This TOSHIBA Card or hot key enables/disables volume mute on your computer. When volume mute is enabled, no sound will come from the speakers or headphones. Selecting this Card or pressing the hot key displays the...

202 Hot Keys/TOSHIBA Cards Hot key functions 5.375 x 8.375 ver 2.3 Power plan or Fn + This TOSHIBA Card or hot key displays the power plans and cycles through the power plans. The properties of each power plan, and the power plans that are displayed by this function, are set in the Power Options win...

204 Hot Keys/TOSHIBA Cards Hot key functions 5.375 x 8.375 ver 2.3 Hibernation mode or Fn + This TOSHIBA Card or hot key places the computer into Hibernation mode. If Hibernation mode is disabled, this hot key will not respond. For more information on Hibernation mode, see “Using and configuring Hib...

206 Hot Keys/TOSHIBA Cards Hot key functions 5.375 x 8.375 ver 2.3 Display brightness Cycle through the display modes, then select the desired mode. Not all functions are supported on all models. Some systems also support an additional Swap Image Display mode. This mode is available only if the curr...

207 Hot Keys/TOSHIBA Cards Hot key functions 5.375 x 8.375 ver 2.3 Disabling or enabling wireless devices or Fn + This TOSHIBA Card or hot key enables/disables the optional wireless devices installed in your computer. The wireless modes are: ❖ Wi-Fi ® enabled—Enables just the Wi-Fi ® module. ❖ Bluet...

210 Hot Keys/TOSHIBA Cards Hot key functions 5.375 x 8.375 ver 2.3 Keyboard hot key functions Fn + This hot key turns the cursor control overlay on and off. Fn + This hot key turns the numeric overlay on and off. Fn + This hot key turns the scroll lock feature on and off. Fn + This hot key takes a s...

211 5.375 x 8.375 ver 2.3 Appendix B Power Cord/Cable Connectors Your computer ships with the correct power supply for the country of purchase. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA UL approved Canada CSA approved United King...

212 Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this User’s Guide. AC Alternating Current BIOS Basic Input/Output System BD-ROM Blu-ray Disc Read-Only Memory bps bits per second CD Compact Disc C...

214 Glossary ROM Read-Only Memory RTC Real-Time Clock SD Secure Digital SDRAM Synchronous Dynamic Random Access Memory SSD Solid State Drive TFT Thin Film Transistor USB Universal Serial Bus URL Uniform Resource Locator WAN Wide Area Network www World Wide Web Terms The following terms may appear in...

227 Index A AC adaptor 46 AC power 122 AC power light 46 accessing network 141 adding memory check total memory 62 memory (optional) 52 optional external devices 51 adequate ventilation cooling fan 45 adjusting touch pad settings 84 audio features 142 B backing up files 102 , 112 battery battery lif...