Toshiba KD-1025 - Manual

Toshiba KD-1025

Toshiba KD-1025 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
47 Page 47
48 Page 48
49 Page 49
50 Page 50
Page: / 50

Table of Contents:

  • Page 2 – Trademarks; © 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
  • Page 4 – because the ICs on it may be damaged due to static electricity.
  • Page 5 – CONTENTS
  • Page 7 – Item
  • Page 9 – Front Sectional View; Symbol
  • Page 10 – Layout of Electrical Parts; PWB
  • Page 11 – Electrical Parts; Electromagnetic clutch
  • Page 13 – Driving System and Feeding Operation; • Feeding/Transport system
  • Page 14 – Description of Operations; drive the PFP transport roller.
  • Page 15 – Error Detection; within a specified period of time.
  • Page 16 – Flow Chart
  • Page 19 – DISASSEMBLY AND REPLACEMENT; Installation and Removal of Drawers and Covers; (1) Pull out the drawer fully and remove 1 screw
  • Page 20 – (2) Remove 2 screws and take off the front side
  • Page 21 – (2) Remove 2 screws and take off the feeding
  • Page 22 – front side of the side cover inward.
  • Page 24 – Upper/Lower Transport Rollers; (1) Open the side cover and remove 1 screw on
  • Page 26 – (4) Remove 2 screws and take off the bracket of
  • Page 27 – (7) Take off the side cover and the feeding side
  • Page 28 – Motor; (2) Disconnect 1 connector and take off the
  • Page 31 – motor from the bracket.
  • Page 32 – (4) Remove 1 connector and take off the PFP
  • Page 34 – (2) Raise the pickup arm and release the pickup
  • Page 35 – rings to take off the pickup roller.
  • Page 36 – Switches and Sensors; (2) Remove 1 screw and take off the front side
  • Page 38 – (4) Disconnect the connectors connected to the
  • Page 39 – Harness Diagram
  • Page 40 – Circuit Diagram
  • Page 43 – PC Board
  • Page 45 – PERIODIC MAINTENANCE; Symbols used in the checklist
  • Page 47 – REVISION RECORD; Page
Loading the manual

SERVICE MANUAL

Paper Feed Pedestal

KD-1025

Model: KD-1025
Publish Date: April 2009
File No. SME090003B0
R090121H2600-TTEC
Ver02_2011-12

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Trademarks; © 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved

Trademarks • FLOIL is a registrated trademark of Kanto Kasei Ltd. CORPORATION• Mylar is a registered trademark of DuPont Teijin Films U.S. Limited Partnership.• Molykote is a registered trademark of Dow Corning Corporation.• Other company names and product names in this manual are the trademarks of ...

Page 4 - because the ICs on it may be damaged due to static electricity.

16.During servicing or maintenance work, be sure to check the nameplate and other cautionary labels (if any) to see if they are clean and firmly stuck. If not, take appropriate actions. 17.The PC board must be stored in an anti-electrostatic bag and handled carefully using a wristband, because the I...

Page 5 - CONTENTS

© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved KD-1025 CONTENTS 1 CONTENTS KD-1025 1. SPECIFICATIONS......................................................................................................... 1-12. OVERVIEW .......................................................................

Other Toshiba Models