Toshiba HVS32-240-X - Manual

viii NOTES ON CLEANING Use a soft dry cloth for cleaning. For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as thinner and benzene, as they may damage the surface of the DVR. If using a chemical s...

ix WARNING TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE CO...

x RACK MOUNT INSTRUCTIONS Elevated Operating Ambient – If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible w...

xi CE NOTICE This product is in conformity with the following European Directives: ELECTROMAGNETIC COMPATIBILITY DIRECTIVE , 89/336/EEC (as amended by 92/31/EECand by Article 5 of 93/68/EEC) per the provisions of: EN 55022:1994 EN 55022:1994 EN 55022:1994 EN 61000-3-2:1995 EN 61000-3-2:1995 EN 61000...

xiii Table of Contents PREFACE .................................................................................................................................................................... 19   ABOUT THIS GUIDE .....................................................................................

19 PREFACE ABOUT THIS GUIDE This manual is a setup and maintenance guide that can be used for reference when setting up the DVR and for troubleshooting when a problem occurs. Only authorized personnel should attempt to repair this unit. Toshiba reserves the right to make changes to the DVRs represen...

21 INTRODUCTION PRODUCT DESCRIPTION A Surveillix XVS / DVS / HVS is a DVR, a server that performs as a High Definition Digital Recorder. By utilizing the many features of a computer, including processing power, storage capacity, graphics compression, and security features, the DVR is more powerful t...

22 FEATURES Toshiba’s Surveillix DVRs include the following new features: • Optimized and Designed for Microsoft® Windows XP Embedded® • Up to 32 Camera Inputs • Supports up to 16 Relay Outputs on Alarm Activation • Supports up to 16 Sensor Inputs for Alarm Control • Remote System Operation & Co...

23 CONTROLS AND CONNECTIONS This chapter includes the following information: • Input / Output Connector Locations • Front Panel Controls and LEDs • Rear Panel Connectors

24 FRONT PANEL CONTROLS The front panel of the DVR contains the devices that will be commonly used for data removal, retrieval, and backup replacement. The most common components and buttons are shown below: XVS DVD±RW Drive USB Ports Cooling Fan Intakes Power Switch Hard Drive Activity LED Power LE...

26 REAR PANEL CONNECTORS The rear panel of the DVR contains the connectors used to attach cameras, sensors, and relays to the DVR. Below are diagrams that outline the location and description of each connector: XVS 4 Channel BNC Connectors for Video Input Cooling Fan Audio/Spot Monitor Output AC Pow...

30 PCI Card Configurations 240 PPS 8/16 Channel PCI Configuration 240 PPS 32 Channel PCI Configuration 480 PPS 16 Channel PCI Configuration RCA Video Out SVGA Monitor Output Audio Input Cable Adapter RS-485 Interface DVI Output RCA Video Out Audio Inputs RS-485 Interface RCA Video Out Audio Inputs R...

31 480 PPS 32 Channel PCI Configuration H.264 240 PPS 8 Channel H.264 480 PPS 16 Channel RCA Video Out Audio Input Cable Adapter RS-485 Interface Audio Input Cable Adapter RCA Video Out RS-485 Interface RCA Video Out Audio Inputs RS-485 Interface SVGA Monitor Output DVI Output

33 GETTING STARTED This chapter includes the following information: • Included Components • Setting up the DVR Hardware • Optional Components

34 IDENTIFYING INCLUDED COMPONENTS Surveillix™ DVRs come with a mouse, keyboard and selected software and cables. Identify the following components to make sure everything has been properly included with the new DVR. If any of the following items are missing, contact the dealer to arrange a replacem...

35 OPTIONAL COMPONENTS To fully utilize the DVR’s potential; several optional Surveillix components are listed below. Contact the dealer for more information. Extra Video Storage Hard Drive Each DVR has a virtually unlimited storage potential. Add additional Video Data Hard Drives to extend the amou...

37 MONITOR SETUP The DVR has the following connections available to attach a monitor. SVGA Output To VGA Monitor. DVI-D Output To TV / Digital Monitor Attach the monitor or monitors to the rear of the DVR using the cable supplied by the monitor manufacturer. Refer to the monitor manual for detailed ...

38 MAKING CONNECTIONS ON AN XVS Connecting a Video Source There are different types of Video Sources that can be plugged into the XVS including DVD players, VHS players, and CCTV Cameras. The back of the XVS contains up to 16 video inputs depending on the model. The connectors use the BNC standard. ...

39 Connecting Sensors to the XVS Each XVS may have up to 16 Sensor inputs. These inputs can be used with devices such as infrared devices, motion device, glass breakage alarms, door and window trips, and many more. The Sensors can be set to Normally Open or Normally Closed inside the software. There...

40 Connecting Control Outputs to the XVS Each XVS may have up to 4 Control Outputs. These outputs can be used to trigger devices such as Sirens, Phone Dialers, Lights, and any other relay activated device. There is no power supplied to the ports. Use an external power supply if necessary. 16 Channel...

41 Looping Outputs The 16 Channel XVS may have up to 16 Looping outputs. Depending on the destination of the outputs, each output may have to be terminated. The outputs are located on the BNC Connector Cable. Attach the cable to the input for the BNC Connector Cable highlighted below. The video inpu...

42 Connecting a PTZ Camera Setting up a PTZ Camera is simple. The DVR comes preassembled with an internal PTZ adapter. The cabling may be run up to 4,000 ft using 22 Gauge Twisted Pair. It is important to understand how the PTZ connects to the DVR. The DVR outputs an RS-232 signal and converts in to...

43 MAKING CONNECTIONS ON DVS / HVS Connecting a Video Source There are different types of Video Sources that can be plugged into the DVR including DVD players, VHS players, and CCTV Cameras. The back of the DVR contains up to 32 video inputs depending on the DVR model. The connectors use the BNC sta...

46 Connecting a PTZ Camera Setting up a PTZ Camera is simple. The DVR comes preassembled with an internal PTZ adapter. The cabling may be run up to 4,000 ft using 22 Gauge Twisted Pair. It is important to understand how the PTZ connects to the DVR. The DVR outputs an RS-232 signal and converts in to...

47 HARD DRIVE ARRAY (DVS / HVS ONLY) Swapping a Hard Drive 1. Press the Hard Drive Power Button to turn off power to the hard drive being removed. 2. Turn the Button Lock to the open position and push the Handle Release Button 3. Pull the Release Handle outward while removing the hard drive. Reverse...

48 TURNING ON THE DVR Once the cables and adapters have been properly connected it is time to turn on the power. To turn on the power follow these steps: 1. Turn on the monitor and any external peripherals (ex. Printers, External Storage Devices, etc.) connected to the DVR. 2. Turn on the Secondary ...

49 DVR BASICS This chapter includes the following information: • Turning the DVR on and off • Becoming familiar with the Display screen • Defining Screen Divisions

50 SETTING THE TIME AND DATE 1. Exit to Windows by clicking the Exit button from the Display screen and selecting Restart in Windows Mode. (See the Display screen section later in this chapter) 2. Open Windows Explorer. Do this by right-clicking the My Computer Icon (located on the top left hand cor...

51 Importing DVR Settings 1. Exit to Windows by clicking the Exit button on the Display screen and selecting Restart in Windows Mode. (See the Display screen section later in this chapter) 2. Click Start > Programs > Surveillix > VFormat. 3. Click the Import button in the System Settings To...

52 DISPLAY SCREEN Each time the DVR starts, the program defaults to the Display screen. The following diagram outlines the buttons and features used on the Display screen. You should become familiar with these options as this is the screen that will be displayed the majority of the time. Live Camera...

53 CAMERA VIEW Recording Status Indicator The camera status for each camera is displayed in the upper right corner on the Video Display Area. The following are the different states for each camera: Recording Displayed when the camera is currently being recorded to the DVR. Motion Detection Displayed...

54 SCREEN DIVISION BUTTONS The Screen Division menu allows you to view cameras in groups such as two by two, three by three and four by four. The button options are shown below. Note When viewing live video from Network Cameras, only 4CH will display at one time. 1st Four Cameras View – Displays cam...

55 Custom Live View Divisions Customize your Live View screen by changing the order of the cameras. Each screen division can be individually customized but a camera can only be displayed once (once in 4 camera view, once in 9 camera view, etc). Both analog and IP video cameras can be moved. Create c...

57 SETUP OPTIONS This chapter includes the following information: • Setup Overview • Camera Setup • Motion • Frame Setup • Schedule • Sensor • Network • Information • Administrative

58 SETUP OVERVIEW The Setup options allow you to optimize your DVR by adjusting things like camera names, reboot schedules, recording schedules and more. It is extremely important that you setup your DVR correctly for several reasons. • Recording Schedules – By optimizing the recording schedule you ...

59 CAMERA SETUP Set Up New Camera 1. Attach camera to the rear of the DVR chassis. 2. Click Setup on the Display screen. 3. Click Camera Setup to open the Camera Setup display. 4. Select the channel that corresponds with the new camera from the Select Camera list. 5. Enter a name for the camera in t...

60 NETWORK VIDEO Supported IP Camera Manufacturers ACTi Arecont Vision Axis Brans D-Link IQeye Lumenera Mobotix Panasonic Pixord Samsung Securgen Sony Stardot Toshiba VivoTek Connecting a Network Device Connecting Manually 1. From the Display screen, click Setup . 2. Click Network Video. 3. Click th...

62 Assigning Audio Channels to a Network Device 1. From the Live View screen, click Setup . 2. Click Network Video. 3. Click the Audio Setup tab. 4. Click an available audio channel on the Channel List . 5. Select a network device added previously. 6. To record the network audio select the Record Ne...

63 Camera Configuration The Camera Configuration tab displays information on all cameras (analog and network) connected to the Surveillix DVR Displaying More Columns The Camera Configuration tab can be customized to display the information you use most. Click Select Column to add or remove specific ...

64 HVR Upgrade and Registration Have the following information available before registering the HVR upgrade. HVR Product Serial Number: That product Serial Number is the unique number that Toshiba provided with the purchase software. System ID: The System ID is a number that is generated by the Surv...

65 5. Verify the information. 6. Click Next if the information provided is correct. 7. Once validated, you will be provided with the Unlock Code. 8. Print the page and save for later reference. Unlocking the Upgrade 1. Return to Setup > Network Video > License. 2. Enter the Unlock Code generat...

66 MOTION SETUP The DVR allows the user to adjust several different Motion Settings and create motion detection areas. Create a Motion Area 1. Click Motion in Setup. 2. Select a camera from the Select Camera list. 3. Select the Detect Detail Motion Area check box. 4. Click Clear . 5. Click Advanced ...

67 Activating an Alarm on a Motion Event 1. In the Motion Setup window, select a camera to edit from the Camera list. 2. Create a motion area. 3. Select the Alarm Output check box. 4. Select a Control NO (Output) to activate for the selected camera. 5. Select an alarm Duration time (seconds) when a ...

68 GENERAL SETUP Function Beep on Login Fail Enables the DVR to beep continuously in response to a failed login attempt. Only an authorized login will stop the beeping. Sequence Setting Allows the video out picture to automatically cycle through channels at a set speed. Example: .Cycle through chann...

69 Intensive Recording Overview The Intensive Recording Option allows you to increase the Pictures Per Second of any camera, using sensor or motion activation. See Frame Setup for information on configuring intensive options. This guarantees that the Pictures Per Second and Resolution will be set co...

71 Control Multiplexer Mode Display 1. Click TV Out on the Display screen. 2. Click Multiplexer . 3. To change the camera that is displayed on the monitor, click the desired camera number in the row that the monitor is connected to. Tip Port 1 is the top port on the TV Out card. Note Only Ports 1 an...

72 Volume The volume control allows fine tuning of the volume settings on the DVR. Volume Options: • Slider Controls – Used to adjust the literal volume for the respective devices listed. • Mute Check Box – Select the mute check box to mute volume on any of the device columns or select the Mute All ...

73 Auto Sequence Setting Auto Sequencing is available either in the Display screen when Auto Sequencing has been enabled or when a Spot-Monitor out signal is used to display on a spot monitor. Auto Sequencing conveniently displays video channels at specified intervals and sequences through each sele...

74 FRAME SETUP OVERVIEW The Frame Setup menu allows configuration of the PPS, resolution, quality, and sensitivity of camera channels. When configuring the PPS sliders the BLUE slider represents the PPS the DVR will record during intensive recording and have available for transmitting to remotely co...

75 Standard Models Note The RED PPS record slider cannot exceed the BLUE PPS capture slider. Note The Software will not allow the maximum available Frames to be exceeded. Note Using H.264 software compression significantly increases the processing load on the Surveillix 120/240/480 platforms. If max...

78 SCHEDULE SETUP Recording Schedule The Recording Schedule window allows the user to create different recording schedules based on the day, time, and type of recording desired. In addition, this window contains the System Restart options that allow the user to perform basic system maintenance by au...

79 Sensor Schedule The Sensors will supersede all other types of recording modes (Motion and Continuous). Regardless of the recording schedule of a particular camera, if a sensor event occurs the associated cameras will begin recording as a Sensor Event. Sensor Recordings will be flagged and searcha...

80 Create a Recording Schedule 1. Select a day to begin creating the schedule for -or- click Single Day Selection , enabling Multi Day Selection , to create the same schedule for multiple days. 2. Highlight the Time-Blocks within the Recording Schedule window for the camera(s) selected to schedule. ...

81 Special Day Schedule The user can create days that have a unique recording schedule. If necessary create these on days that are ‘not typical’ such as Holidays, Special Events, etc. Creating/Editing a ‘Special Day’ Schedule 1. Click Normal Day Mode to enable the Special Day Mode . 2. Select a day ...

82 System Restart Setup System Restart Setup allows the user to define a schedule wherein the DVR automatically restarts according to specified parameters. Create System Restart Schedule 1. Click Schedule on the Setup screen. 2. Click Restart Setup . 3. Select the day(s) of the week to schedule an a...

83 SENSOR SETUP The Sensor setup window allows you to enable, disable and configure Sensors and Relays (Control Outputs). Configure Sensor Response 1. Click Setup on the Display screen. 2. Click Sensor . 3. Click the NO or NC check box to select Normally Open or Normally Closed for the desired senso...

84 Activate PTZ Preset on Sensor 1. Create a PTZ Preset Position. See instructions in the PTZ Setup chapter. 2. Click Setup on the Display screen. 3. Click Sensor. 4. Click Sensor Preset . 5. Select the desired camera from the Channel list. 6. Select the appropriate Sensor from the list. 7. Select t...

85 NETWORK SETUP Network Setup allows the user to adjust settings such as Ports, setup emergency PPP information for use with the Emergency Agent and enable Remote Access. Time Out Value When attempting to connect to the DVR, if the connection does not succeed during the timeout period (seconds), th...

86 ADMINISTRATIVE SETUP Disk Management The Disk Management window is a native Windows function. This window displays the partition scheme and health status of the Hard Disk Drives in the DVR. This window is often used to troubleshoot a DVR, or verify the amount of Hard Drive storage installed. For ...

87 Setting Up DDNS Dynamic Domain Name System (DDNS) is a service that provides a static address to simplify remote connection to the DVR. This service is most useful for installations where the WAN (public) IP address is dynamic (changes from time to time). Most public IP addresses are dynamic unle...

88 User Management The User Management Console allows the administrator to create, edit, and delete user accounts. Each user account can be assigned different privileges to limit the usage of the DVR system. Users can be given administrator privileges by enabling all rights, however only the true ad...

89 User Rank The User Ranking structure allows the option to assign a privilege system (1-10 where one has the most rights) to users of the DVR Software. For example. Since only one user is allowed to use the PTZ controls at any one time, an administrator with a higher rank can kick another user out...

90 Status Check / Email General 1. Click Setup on the Display screen. 2. Click Administrative. 3. Click Status Check/Email. 4. Select the Enable Email Alarm check box. 5. Enter a From Name and e-mail Address . Note This name and address will appear in the From line of the email alert message. 6. Ent...

92 SMART Information The SMART Information tab displays Hard Drive information. SMART Alert 1. Setup the General and Users tabs first. (see above) 2. Select the Enable SMART Alarm. 3. Define the number hours between SMART checks. 4. Select the type of SMART event to trigger an action. 5. Define the ...

93 INFORMATION The Information display allows users to define the site code necessary for connecting to remote software, save comments relative to the DVR and store tech support and contact number information. Site Code A user-specified unique identification name used by other DVR software to identi...

94 INSTANT RECORDING The Instant Recording feature allows users to manually initiate recording on a specific camera, overriding the current schedule. When Instant Recording is activated the DVR flags the clip as an event so Instant Recording instances can be found using the Index Search Instant Reco...

95 SEARCH This chapter includes the following information: • Setup Overview • Daylight Saving Time • Index Search • Preview Search • Graphic Search • Motion Search

96 SEARCH OVERVIEW The DVR has several options that allow the user to easily search through, and find, a particular section of video. From Motion/Sensor indexing to calendar views highlighting days with recorded video; the DVR is equipped to help the user quickly find a specific video or event. The ...

99 SAVE TO JPG OR AVI The DVR can export single images in a JPG Image file format and save video clips in an AVI format. Both JPG and AVI file formats are the most commonly used graphical formats today. Virtually every computer offers some type of support for these file formats which make them the m...

100 Bookmarks Use bookmarks to mark a video clip during a search. Export bookmarked data using the Clip Backup feature. 1. Perform a search for the desired video. 2. Stop playback at the beginning of the desired clip. 3. Right-click the video and select Start Bookmark . 4. Click the play button to c...

101 Single Clip Backup Along with the Save option, a single camera backup option is also included with the Surveillix software. The single Camera or Clip Backup allows the user to backup a single camera without having to backup multiple cameras at a given time. The Clip Backup option gives the users...

102 INDEX SEARCH Using the Index Search can greatly decrease the amount of time spent searching through saved video. The Index Search allows a user to perform a search based on criteria such as Sensor, Motion and Instant Record events Performing an Index Search 1. Click the Calendar button on the Se...

103 PREVIEW SEARCH Preview Search can be used in a number of circumstances to quickly find an exact moment where an event, such as a theft, occurred. The Preview Search gives a 24 Hour visual overview of a single camera by separating a 24 hour period (1 day) into 24 images, one image for each hour o...

104 Performing a Preview Search 1. Select a single camera by either turning off all cameras but one or double-clicking a displayed image. 2. Click Preview Search . 24 images display. If there is no recorded video during a portion of the day, “No Image” will be displayed where the image should be. 3....

105 OBJECT SEARCH Object Search is a powerful search utility that is used to search a region on the video for any motion changes. Results are neatly displayed and can be viewed quickly. Performing an Object Search 1. Perform a Basic Search. See the instructions on Performing a Basic Search. 2. Selec...

106 MOTION SEARCH The Motion Search provides a dynamic display of the levels of motion in recorded video. Adjust the level of motion to only play clips of video at or above that level. Tip To enable motion data to be saved for Motion search, ensure that you select the following settings: On the Moti...

107 SEARCH IN LIVE The Search in Live feature allows users to review events immediately while monitoring live video. Pause, rewind, and resume live video within seconds of an alarm event or suspicious activity. 1. Move the mouse cursor over the desired live video display on the Live Display screen. ...

110 PAN / TILT / ZOOM OVERVIEW The PTZ controls within the DVR allow for powerful control over the cameras. This can be extremely beneficial by increasing the usefulness of the recorded video. Using the PTZ controls you can create custom preset configurations that can continuously sweep across large...

111 Supported PTZ Protocols Protocols are added frequently. The supported list may contain new protocols that are not listed here. The current supported protocols are: ADEMCO RAPID DOME AMERICAN DYNAMICS BOSCH AUTODOME CBC (GANZ) C-BEL CHIPER CPT (V9KR SERIES) CNB-AN102 CNB-PTZ100 COMPUTAR COVI EVQ-...

112 ADVANCED PTZ SETUP Note Preset and Tour options may vary depending on the camera Creating and Viewing Preset Positions A Preset Position is a user-defined location where the camera can be pointed, zoomed in, and focused. Preset positions can be defined and labeled if the camera supports this. Cr...

113 PTZ Address Settings Some protocols support software address settings. The RX Addresses and ID settings are compatible with a particular line of receivers that support 2 ID addresses. The PT Driver Address is associated with the PTZ ID address set on the camera. The addresses must match for the ...

114 CONTROLLING A PTZ CAMERA The Surveillix DVRs provide control for a PAN/TILT/ZOOM camera in two different ways. The first method is to use the Graphical PTZ Controller that appears when the PTZ button is clicked on the Display screen. The second method is to use the mouse to control the camera di...

115 Using the On-Screen Compass 1. Click Setup on the Display screen. 2. Click PTZ . 3. Select the On Screen Compass check box to enable the feature. 4. Click Apply . 5. Click Exit to return to the Display screen. 6. Click PTZ . 7. Control the PTZ by dragging the mouse on the screen in the desired d...

116 PTZ Tour Schedule Create PTZ Tour Schedule 1. Click Setup on the Display screen. 2. Click PTZ . 3. Click Tour Schedule to open the PTZ Tour Schedule window. 4. In Single Select Mode select one day of the week to create a schedule for or toggle to Multi Select Mode to select multiple days with th...

117 BACKING UP VIDEO DATA This chapter includes the following information: • Overview • Saving Video to a DVD • Saving Video from a Single Camera • Scheduling Regular Video Backup

118 BACKUP OVERVIEW The Backup Center allows you to back up recorded video data from multiple dates and times to one or more locations including the DVD-RW drive, Network Storage Locations, and External Hard Drives. The DVR can easily backup important video data to an internal or external media loca...

119 General Screen Overview The General Backup Screen is used for performing bulk backup of video recorded by all cameras for a selected period, or periods, to a specified storage location. Hour / Minutes Recording data displays in hourly (24 horizontal columns) and 10-minute (6 vertical cells) segm...

120 Clip Screen Overview The Clip Screen is used for backing up video recorded by individual cameras for a selected period of time to a specified storage location Performing a Clip Backup 1. Click Backup on the Display screen. 2. Click the Clip tab at the top of the Backup Center window. 3. Set the ...

121 Scheduled Screen Overview The Scheduled Backup Screen is used for performing bulk backup of video recorded by all cameras for a selected period, on a regular scheduled basis (1-24 hours). The Scheduled Backup Screen is similar to the General Backup Screen. Performing a Scheduled Backup 1. Click ...

124 LAN OVERVIEW The DVR can be easily connected to a Local Area Network (LAN) and uses Microsoft’s® powerful and secure Windows® XP Embedded operating system. This allows for easy and well-documented instructions on setting up LAN connections no matter what type of LAN you want to use. A LAN is a g...

126 FEATURES The instructions below are for LDAP Integration with Server Software version 3.6.36 and above. • DVR server does not need to be joined to the Domain. The DVR server will query the LDAP server for accounts and authorization levels. • The DVR server creates groups within Active Directory ...

130 WEB VIEWER OVERVIEW The DVR allows you to access video using Microsoft® Internet Explorer® 7. Highlights: View Live Video from most computers Username and Password protected Easy to use graphical interface Basics: 75 users can access the Web DVR simultaneously. The Web Viewer is an easy, secure ...

134 EMERGENCY AGENT OVERVIEW The Emergency Agent software is a utility that streams video across a Local Area Network to a Client PC when an alarm is detected on the DVR. The video that streams across can be stopped, played forwards and backwards, in slow motion or real speed. The utility is loaded ...

135 Setup Window Network Port Indicates the port which the Emergency Agent uses to listen for incoming events. This number should be changed to the same number as is set in the Emergency Port in Network Settings on the DVR. Save Directory Sets the location that recorded video footage is saved to. No...

136 Add Items to Alarm Confirm List 1. From the Option menu, click Setup . 2. Type the desired text in the box below the Alarm Confirmation List. NOTE: The items in the Alarm Confirmation List will be available on a list under Status Setting in main Emergency Agent screen. 3. Click Add . 4. Click OK...

137 SEARCH ALARM WINDOW Export Quality It may be necessary to reduce the overall size of an AVI file; for example, to email to someone. AVI file sizes can be reduced by reducing the image quality. However, reducing the image quality causes the AVI video to appear more pixilated. When size is not an ...

138 REMOTE SOFTWARE OVERVIEW The DVR was specifically designed to be fully operated and maintained remotely. It connects using the standard TCP/IP protocol thorough connection types such as DSL, Cable Mode, T1, ISDN, 56K Modem, LAN, and more. The Surveillix Remote software allows you to view live vi...

139 Remote Software Setup Installing Remote Software 1. On the client computer, insert the Surveillix Software CD into the CD-ROM. The CD should play automatically. 2. When prompted, select the Install Remote Software option. Follow the installation instructions carefully. 3. When the software finis...

141 DIGITAL VERIFIER OVERVIEW JPG images and AVI video files that are exported from the Digital Video Recorder are automatically embedded with a digital signature. Digital Signatures are a way to verify the authenticity of the images to ensure that they have not been tampered with or edited in any w...

142 BACKUP VIEWER OVERVIEW The Backup Viewer allows you to play back the exported video in its proprietary format. Video saved in this format is extremely difficult to tamper with and therefore is the ideal solution when law enforcement and the legal department are involved. This video cannot be rea...

143 SCS OVERVIEW SCS software is Network DVR Management Software; a powerful utility that allows 100 or more DVRs to be controlled using one computer. This software allows you to view live video, search saved video, edit and configure setup on each DVR, and import maps of buildings and other locatio...

145 APPENDIX: SPECIFICATIONS XVS SPECIFICATIONS 4CH 120PPS 16CH 240VPPS 16CH 240PPS Video Format NTSC/PAL Video Inputs (BNC) 4 16 16 Video Outputs DVI-D x 1, SVGA x 1 (Primary Display), RCA x 1 (Spot Monitor) Looping Outputs (BNC) 0 16 16 Recording Rate 120 PPS 360×240 120 PPS 720×240 60 PPS 720×480...

146 DVS SPECIFICATIONS 240 480 240H 480H 8 16 32 16 32 8 16 Video Format NTSC/PAL Video Inputs (BNC) 8 16 32 16 32 8 16 Video Outputs DVI-D x 1, SVGA x 1 (Primary Display), RCA x 1 (Spot Monitor) RCA x4 (480PPS model only) Looping Outputs (BNC) 8 16 32 16 32 8 16 Recording Rate 240 PPS 360×240 120 P...