Page 2 - Important Safety Information
Introduction 2 Important Safety Information Thank you for choosing this Toshiba Digital TV recorder. Before using the Digital TV recorder, please take a minute to read the following important safety information. • Although this appliance has been carefully manufactured and rigorously checked prior t...
Page 3 - Do noT set up near radiators.
Introduction 3 Important Safety Information • The unit becomes warm under normal operation. Do noT place any covers or blankets on the unit in order to prevent overheating. The ventilation holes are not to be blocked. Do noT set up near radiators. Do noT place in direct sunshine. • Do noT allow the ...
Page 4 - General Information; • Failure to edit contents as intended by the consumer.; About HDD; unnecessary titles in advance.; notes on Copyright; About Copyright; engineering or disassembly is prohibited.
Introduction 4 General Information Toshiba is not liable for any damage or loss caused directly or indirectly by the malfunction of this unit, including, without limitation, any one of the following:• Failure to record contents intended to be recorded by the consumer. • Failure to edit contents as i...
Page 5 - Copyright protection system; of the connected AV device.; Environmental Information; Following information is only for EU-member states:; In conformity with the WEEE Regulations.
Introduction 5 notes on Copyright Copyright protection system To play back high definition video images via an HDMI connection, it is necessary that both the player and the display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protectio...
Page 6 - End User Licence; contact the manufacturer.; Trademark Acknowledgements; are registered trademarks of Dolby Laboratories.
Introduction 6 End User Licence This product includes software code developed by third parties, including software code subject to the GNU General Public License (‘GPL’) or GNU Lesser General Public License (‘LGPL’). As applicable, the terms of the GPL and LGPL, and information on obtaining access t...
Page 7 - Table of Contents
Table of Contents Introduction Important Safety Information ................................................................................................2 General Information ..............................................................................................................4 Notes on C...
Page 8 - Package Contents; Digital TV recorder
Package Contents HDR5010KB QUICK START MANUAL © 2010 Toshiba Corporation q Digital TV recorder w Remote control e Batteries (2x R3/AAA) r AC mains adapter* t Owner’s manual y Quick start guide u Help leaflet * For use exclusively with this Digital TV recorder. Never use this AC mains adapter with an...
Page 9 - overview of the Digital TV Recorder; Front Panel; w e r
overview of the Digital TV Recorder Front Panel Rear Panel q Aerial input socket w Aerial (loop through) output socket e LAN socket r HDMI output socket t HDMI input sockets 1/2 y USB socket u SPDIF optical output (Standard TOS link connector) i Power socket o SCART output socket Standby / ON switch...
Page 10 - overview of the Remote Control
overview of the Remote Control 3$ 3! 2(2* 3# 2& 3@ 3) 2^ 2$ 2% q r t u y 1) 1# 1% o 1* e 1& i w 1@ 1$ 1! 1^ 2# 2@ 1( 2) 2! Getting Started 10 HDR5010 User Guide.indb 10 22/07/2010 10:38
Page 12 - Inserting the Batteries into the Remote Control; they are inserted correctly.
Inserting the Batteries into the Remote Control 1. Lift open the battery compartment cover (as shown). 2. Install 2 “R3/AAA” batteries (included); the correct polarity is shown inside the battery compartment. Always check the positive/negative symbols on the batteries to ensure they are inserted cor...
Page 13 - Connecting your Digital TV Recorder; Plug your aerial lead into the RF In socket of the recorder.; system. Refer to page 37 for more details. Cable not supplied.; reader in to the USB socket. Refer to page 31 for more details.; TV aerial
Connecting your Digital TV Recorder q Plug your aerial lead into the RF In socket of the recorder. w If required, plug an Ethernet cable between the LAn socket and an Ethernet system. Refer to page 37 for more details. Cable not supplied. e If required, plug a SCART cable between the SCART oUTPUT so...
Page 14 - Switching your Digital TV Recorder on; To Turn on Power to the Unit:; LED will change to Blue.; To Turn off Power to the Unit:; The Power Ring changes to Red.; turn Off the power to the unit.; Standby; Front Panel Display; or listened to. It also displays symbols such
Switching your Digital TV Recorder on To Turn on Power to the Unit: 1. Switch On power at the wall socket, if required. 2. Within a few seconds the front panel will display “Starting” and the Power ring LED will light. 3. After start up is complete, an image is displayed on your TV screen and the Po...
Page 15 - Automatic Tuning; automatic tuning process.; Congratulations the Digital TV recorder is now ready to use.
Automatic Tuning 1. Ensure the aerial is plugged into this unit. 2. Once the unit has powered up for the first time, the following menu is displayed. Press the [oK] button to continue. note:• On initial startup there is also an option available to access advanced setup by pressing the [RED] button b...
Page 16 - Everyday Use; and previous channel watched
Everyday Use Changing channels Type in the channel number using the [0]-[9] buttons. Alternatively, press the [Ch+] and [Ch-] buttons to select the next/previous channel. Channel hopping Press the [ ] button to return to the previous channel watched. Hop between the current and previous channel watc...
Page 17 - Using Standby; Common Symbols
Everyday Use Using Standby When you’re not watching TV, you should set the Digital TV recorder to Standby. Press the [ ] button to switch between On (Blue Power ring LED on the front panel) and Standby (Red power LED on the front panel). This unit has a low power feature which means that when left i...
Page 19 - The Channel List; The Channel List displays all the available channels.; To; Display the previous nine channels in the
The Channel List The Channel List displays all the available channels. To Press Access the Channel List... [oK] button while watching TV. Select channels... [ / ] buttons. Display the previous nine channels in the list... [RED] button. Display the next nine channels in the list... [GREEn] button.Swi...
Page 20 - The Info Display
The Info Display When watching TV, the Info display gives brief information on the current and future programmes (when the programme information is transmitted by broadcasters). You can also set programmes to be recorded from the Info display. When watching a recording, the Info display gives a brie...
Page 21 - main picture is always played.; Change the channel displayed in the PIP
Picture In Picture (PIP) Picture In Picture allows you to watch two channels at the same time. The sound from the main picture is always played. To Press Switch on Picture In Picture... [PIP] button. Move the PIP screen... [ / / / ] buttons. Select/highlight the PIP screen... [PIP] button. Change th...
Page 22 - Recording Programmes; Recording TV Programmes; Recording from the Info display
Recording Programmes This Digital TV recorder has twin tuners, making it possible to record two programmes at the same time. When recording two programmes at the same time you can also: - watch either of the programmes you are recording. - start to playback one of the recordings, even though it’s st...
Page 23 - Recording options; recording. The number of options available may vary.
Recording Programmes Recording options Below is the bottom part of an on screen menu that may appear when you make a recording. The number of options available may vary. If you do not wish to use any of these options press the [oK] button or simply wait until the menu disappears. There are 3 options...
Page 24 - Recording Conflicts
Recording Programmes Recording Conflicts Your Digital TV recorder can record up to two programmes at the same time. If you attempt to record three or more programmes that overlap, the unit will try to resolve the conflict automatically by recording the programme at a different time or on a different...
Page 25 - Timeshifting; Pausing Live TV; Fast Forwarding Timeshifted TV; Watching in Slow Motion
Timeshifting Timeshifting allows you to Pause live TV, it lets you pause a broadcast programme and continue watching it later. The maximum length of time you can pause a programme for is 4 hours. Pausing Live TV • Press to pause live TV. Press to resume. note: • When live TV is paused, the timeshift...
Page 26 - The Timers Screen; View additional pages of timer events
The Timers Screen The Timers screen displays all the programmes that are currently set to record. You can also set a manual timer and modify or cancel an existing timer from the Timers screen. To Press Access the Timers menu... [TIMER] button. Select a timer event... [ / ] buttons. View additional p...
Page 27 - Modifying Timers; Modifying a Timer; The following settings are available:; details). Only the Change/Delete or Playback settings can be; BBC ONE) will be displayed. All of the settings can then be changed.
Modifying Timers Modifying a Timer You can edit a current timer to change the Type, Channel, Start and End time/date. 1. With the required timer highlighted, press the [GREEn] button. If the timer is protected, use the [0]-[9] buttons to enter the PIN (default = 0000)*. 2. Press [ ] or [ ] to highli...
Page 28 - Manually Setting a Timer
‘Manual’ This is displayed if you manually set a timer (see next page). The Channel, Start time, End time, Change/Delete & Playback can all be changed. Change/Delete:‘Allowed’ The timer can be changed or deleted. ‘Disallowed’ The PIN (default = 0000)* must be entered correctly before the timer c...
Page 29 - The Library Screen; View additional pages of recordings
The Library Screen The Library menu displays all the recordings currently stored on the hard disk. You can also browse and manage your recordings from the Library menu. The Library menu will take longer to load if you have several recordings stored on the hard disk. To Press Access the Library menu....
Page 30 - Playing a Recording from a Specific Position; within the recording.; Setting Protection and Playback options; inappropriate recordings.; Using the Playlist; ’ is added by
The Library Screen Playing a Recording from a Specific Position You can play a recording from the start, the end, the last played position or from any point within the recording. 1. With the required recording highlighted, press the [oK] button. 2. Press [ / / / ] to highlight the required option. (...
Page 31 - The Photo Viewer; operating the Photo Input; Prepare the Photo storage as follows:; Digital Still Camera:; No preparation required.
The Photo Viewer The Photo viewer function, allows you to view photos from devices, such as, Digital Still Camera (DSC), USB Card readers and USB Flash drives. operating the Photo Input 1. Prepare the Photo storage as follows: Digital Still Camera: Set up according to the instructions for “connectin...
Page 33 - The Main Menu; Main Menu Structure
Main Menu Edit Channel List Hide Channels Sort Channels Tuning Automatic Search Guidance Lock Manual Search Parental Control Enter PIN XXXX Enter PIN XXXX Lock Channels Set PIN Settings General Settings Accessibility Settings DTR Settings Dolby Settings Network settings Service Manufacturers Details...
Page 34 - Main Menu options; Edit Channel List Menu
Main Menu options Edit Channel List Menu • Hide Channels Allows you to hide unwanted channels. Press the [oK] button to select a channel to hide. • Sort Channels Allows you to rearrange the channel order. Press the [oK] button to select the channel you wish to move. Press [ ] or [ ] to select the ne...
Page 36 - Auto Delete; Allows you to delete all recorded programmes.; Dolby Settings; The following options are available:
Main Menu options Auto Delete You can set the Digital TV recorder to automatically delete recorded programmes, the options available are Oldest, Oldest Played or Never. Programmes will only be deleted when there is not enough hard disk space available for new recordings. Default setting is Never. Fo...
Page 37 - Audio Delay
Main Menu options 3. Dolby Surround. Select this option if connecting to a TV/Amplifier that supports Dolby Surround Pro Logic, Dolby Pro Logic II, Dolby Pro Logic IIx or Dolby Pro Logic IIz decoding. - All outputs will carry Stereo (with Dolby Surround). 4. Stereo. Select this mode if connecting to...
Page 38 - Parental Control Menu; Lock Channels; Allows you to set and verify your new PIN.; Tuning Menu; Manufacturer’s Details
2. Manual. Allows you to manually change your IP settings (for advanced users only). Use the [ / / / ] buttons to navigate through the table and enter your own numbers using the [0] - [9] buttons. note:• The unit’s fixed MAC address can be found under the Manual option, above. • If you choose invali...
Page 39 - Transfer the file to the root directory of your USB Flash drive.; Select USB Software Upgrade from the Service menu.; (You can check the new version in manufacturer’s details); Reset Digital TV Recorder; Allows you to reset the Digital TV recorder to its default state.
• Signal Strength Allows you to check the DTT signal strength, channel and transmitter name. The quality of your signal is indicated by a colour bar; green is good, yellow is average and red is poor. • over Air Software Upgrade Allows you to search for software updates through your aerial (when avai...
Page 40 - Programming the Remote Control; Follow the procedure below to programme the remote control.; button flashes twice and lights ON.
Programming the Remote Control The Digital TV recorder’s remote control can be programmed to operate certain TVs. Follow the procedure below to programme the remote control. 1. Find the 3 digit code for your brand of TV from the brand codes, starting on page 46. note: • If your brand is not included...
Page 41 - Manual Programming the Remote Control; Finding the Remote Control’s Current Codes; may be useful to know the correct code for your TV.
Manual Programming the Remote Control If your TV brand is not included in the code list, or the brand codes in the list do not operate your TV, it may still be possible to programme the remote control to operate your TV. 1. Press and hold the [ ] button and the [AD] button for 3 seconds, then the [ ...
Page 42 - Troubleshooting; before connecting again to the mains supply.
Troubleshooting Should you experience a problem with your Digital TV recorder which can’t be resolved using the table below, put the unit into Standby mode, then unplug completely from the mains supply. Leave the unit unplugged for at least one minute before connecting again to the mains supply. Pic...
Page 44 - Specifications
Specifications Physical Specification Size (W) 352mm x (H) 56mm x (D) 270.8mm Weight 1.9 kg Power Requirements Input voltage 12V DC 2.5A (with supplied AC mains adapter) DC jack connector 6mm (2.1mm Pin) DC Jack Power consumption (On) Max. 30W Power consumption (STBY) 0.8W Operating temperature +5˚C...
Page 46 - Remote Control Brand Codes; TV Brand List
Remote Control Brand Codes Use the brand codes in the following list when programming the remote control to operate your TV (refer to page 40). TV Brand List Brand Code(s) Brand Code(s) Brand Code(s) Aiwa: 035, 112, 114, 163 JVC: 004, 008, 012, 029, 055, 060, 075, 091, 105, 106, 111 Pye: 011, 056, 0...
