Page 3 - Digital Switchover; IFOEPFTTXJUDIPWFSIBQQFO; EJHJUBM; How the switchover affects your TV equipment:
- 2 - Digital Switchover 8IFOEPFTTXJUDIPWFSIBQQFO 5IFFYBDUEBUFZPVTXJUDIEFQFOETPOUIFUSBOTNJUUFSZPVBSFTFS WFECZ5PDIFDLXIFOZPVTXJUDIHPUP%JHJUBM6,µTQPTUDPEFDIFDLFSPOXXXEJHJUBMVLDPVL $IFDLZPVS*57OFXTTFSWJDFPSMPPLBU5FMFUFYUQBHFUPTFFXIBU57SFHJPOZPVµSFJO $PQFMBOETXJUDIFTPO0DUPCFS ,FFQUIJTJNQPSUBOUJOGPSNBUJP...
Page 7 - Contents
- 6 - Contents Digital Switchover ................................................... 2Re-tuning: TOSHIBA Freeview Products ................ 3Manual Re-tuning ................................................... 4Safety Precautions ................................................. 8 Air Circulation ....
Page 8 - Con
- 7 - Conditional Access ........................................... 32Language .......................................................... 32Parental ............................................................ 32Timers ............................................................... 32Date/Time Sett...
Page 9 - Safety Precautions; tted; Note
- 8 - Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equip-ment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general n...
Page 10 - Installation and Important Information; Where to install; Please take note; be available. Reception of future additional or modi; EXCLUSION CLAUSE; A Toshiba wall bracket or stand, where available, must be used.
- 9 - Installation and Important Information Where to install Sturdy tie (as short as possible) P Clip P Clip “P” Clip position on TV is dependent on model. “P” Clip position on TV is dependent on model. * Button and stand style is dependent on model. Locate the television away from direct sunlight ...
Page 11 - Important safety information; Information for the DVB-T function; cations, the compatibility to future digital DVB-T; Possible Adverse Effects on LCD Screen; If a; IMPORTANT INFORMATION; TV Installation; If a television is not positioned in a suf
- 10 - Important safety information USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.Headphone Warning Loud music can damage y...
Page 12 - Important safety information (continued)
- 11 - • This set should only be connected to an 220-240V AC 50Hz mains power supply. Do not attempt to connect it to any other type of supply.• The socket outlet must be installed near the equipment and is easily accessible.• Do not open this unit. An attempt to repair the unit by a non-expert coul...
Page 13 - To display your LCD TV using a wall bracket; Removing the pedestal stand; (1) Carefully lay the front of the TV face down on a
- 12 - To display your LCD TV using a wall bracket Removing the pedestal stand (1) Carefully lay the front of the TV face down on a fl at, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface. Note: Extreme care should always be taken when removing th...
Page 14 - The Remote Control; Inserting Batteries and Effective Range of the Remote Control; TOSHIBA
- 13 - The Remote Control Simple at-a-glance reference of your remote control. Inserting Batteries and Effective Range of the Remote Control Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for this remote ar...
Page 15 - Connecting External Equipment
- 14 - Connecting External Equipment Before connecting any external equipment, remove the mains plug from the wall socket. Aerial cable:........................................................... Connect the aerial to the ANT. socket on the rear of the television. SCART lead: ..........................
Page 16 - Connecting an HDMI® or DVI Device to the HDMI Input; To Connect an HDMI Device; HDMI device; To Connect a DVI Device
- 15 - Connecting an HDMI® or DVI Device to the HDMI Input The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High...
Page 17 - To Connect a Computer; To Connect a USB Disk; CAUTION; USB Memory Connection; Connecting a Computer
- 16 - To Connect a Computer With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the television’s speakers.When connecting a PC to the VGA input on television, use an analogue RGB (15-pin) computer cable and use the AUDIO INPUT...
Page 18 - Environmental Information; Repair Information; Power Save Mode
- 17 - Environmental Information This television is designed to consume less energy to save environment. • You not only help to save the environment but also you can save money by reducing electricity bills thanks • to the energy ef fi ciency feature of this TV. To reduce energy consumption, you sho...
Page 19 - Controlling the TV; Switching on; Using the Remote Control; Using the Controls and Connections on the TV; Standby LED
- 18 - Controlling the TV A wide variety of external equipment can be connected via the sockets located on the side and back of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the left side of the television may b...
Page 20 - Initial Installation; rst time installation.
- 19 - Initial Installation Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your television. To set up the television use the buttons on the remote control as detailed on page 13 . IMPORTANT: Ensure that th...
Page 21 - Searches and stores aerial DVB stations.; Auto Tuning
- 20 - Auto Tuning As new services are broadcast, it will be necessary to retune the television in order to view them. Auto Tuning will completely retune the television • and can be used to update the channel list. It is recommended that Auto Tuning is run periodically to ensure that all new service...
Page 22 - Manual Tuning, Analogue Fine Tuning
- 21 - Digital Manual Search The feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known. Select • Manual Search from the Installation menu and press OK. After selecting search type as • Digital , you can enter the multiplex or frequency n...
Page 23 - SUBTTL; Volume; General Operation
- 22 - Stereo and Bilingual Transmissions If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time posi-tions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear. Stereo… Press LANG to s...
Page 24 - Viewing Channel List; Moving a Channel; Renaming a Channel; GREEN; Channel List, Sorting Programmes, Programme Locking
- 23 - Viewing Channel List The channel order may be changed to suit your personal preference. Select • Channel List from the main menu and press OK . The following menu will be displayed: Select • Edit Channel List to manage all stored channels. Use Up or Down and OK buttons to select Edit Channel ...
Page 25 - Viewing Info Banner, Electronic Programme Guide
- 24 - Viewing Info Banner Press • INFO button the information screen will appear giving details of the channel and programme currently being viewed. Whenever you change channel, the TV displays the • broadcast picture along with an information banner at the bottom of the screen. This will remain on...
Page 26 - Language Settings; Preferred; Language Selection
- 25 - Language Settings Using this menu you can adjust the preferred language settings. Select • Language from Setup menu and press OK to view this menu. Press the BACK button on the remote control to exit. Preferred These settings will be used if available. Otherwise the current settings will be u...
Page 29 - • Setting; Picture Zoom; continued
- 28 - Advanced Settings Select Advanced Settings and press OK button to view or edit advanced picture settings: Colour Temp Colour Temperature increases the ‘warmth’ or ‘coolness’ of the picture by increasing the red or blue tint. In the • PICTURE menu, press Up or Down to select Colour Temp . Pres...
Page 30 - Changing Picture Format; SCREEN; button and select; repeatedly to select between; Auto; is selected the format being displayed; Subtitle
- 29 - Changing Picture Format Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Press SCREEN button and select Picture Zoom . Press OK repeatedly to select between Auto, 16:9, Subtitle, 14:9, 14:9 Zoom, 4:3, Panoramic or Cinema. When Auto is sele...
Page 33 - Settings Menu Operation, Conditional Access
- 32 - Con fi guring Your TV’s Settings Detailed settings can be configured to suit your personal preferences. Viewing Settings Menu Press MENU button and select Settings icon by using Left or Right button. Press OK button to view Settings menu. Operating Settings Menu Items Press • Up or Down butto...
Page 34 - Timers; This feature will set the television to go to a speci; You can con
- 33 - T h e C A M s h o u l d b e c o r r e c t l y i n s e r t e d , i t i s • impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted. Connect the TV to the mains supply, switch on and then wait for few moments until the card is activate...
Page 35 - Source Settings, Other Controls
- 34 - Con fi guring Source Settings You can enables or disable selected source options. The TV will not switch to the disabled source options when SOURCE button is pressed. Select • Sources in the Settings menu and press OK button. Press • Up or Down buttons to select a source. Use • Left or Right ...
Page 36 - Other Controls
- 35 - Blue Background Press MENU button and select settings by using Left or Right button. Press OK to continue. Use Up or Down to select others settings and then press OK . Select Blue Background using Up or Down buttons and use Left or Right to set. If the signal is weak or absent, the TV will au...
Page 37 - HDMI True Black; button and select settings by using Left; to continue. Use Up or
- 36 - HDMI True Black While watching from HDMI source, this feature will be visible in the Picture Settings menu.Press MENU button and select settings by using Left or Right button. Press OK to continue. Use Up or Down to select others settings and then press OK . Select HDMI True Black using Up or...
Page 38 - Playing MP3 Files; To play mp3; USB Media Browser
- 37 - Manual Start To display Media Browser window, you can press • MENU button on the remote control and then select Media Browser by pressing Left or Right button. Press • OK button to continue. Media Browser menu contents (depending on the contents of your USB drive) will be displayed. Auto Star...
Page 39 - Viewing JPG Files; Photos; Slideshow Feature
- 38 - Viewing JPG Files To view photo fi les from a USB disk, you can use this menu screen. When you select Photos from Media Browser, available image fi les will be fi ltered and listed on this screen. If you select a subtitle fi le and press OK button, you can select or deselect that subtitle fi ...
Page 40 - Video Playback; Videos; Media Browser Settings
- 39 - Video Playback When you select Videos from Media Browser, available video fi les will be fi ltered and listed on this screen. You can use Up or Down button to select a video fi le and press OK button to play a video. If you select a subtitle fi le and press OK button, you can select or desele...
Page 41 - Analogue Text Services
- 40 - Analogue Text Services Before using the text services, the required language region must be chosen. Select • Language from the SETTINGS menu. Press the • Left or Right button to choose the required language region. After the teletext language is selected, press • MENU button to exit. Using Te...
Page 42 - Appendix A: PC Input Typical Display Modes; Index
- 41 - Appendix A: PC Input Typical Display Modes The following table is an illustration of some of the typical video display modes. Some, due to the display native resolution, are scaled automatically to enable correct image to be displayed.Your TV may not support different resolutions. Supported r...
Page 43 - Appendix B: AV and HDMI Signal Compatibility (Input Signal Types)
- 42 - Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) Source Supported Signals EXT (SCART SOCKETS) PAL 50/60 NTSC 60 RGB 50 RGB 60 SIDE AV PAL 50/60 NTSC 60 YPbPr 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50Hz 720p 60Hz 1080i 50Hz 1080i 60Hz 1080p 50Hz 1080p 60Hz HDMI1 HDMI2HDM...
Page 44 - Appendix C: Supported File Formats for USB Mode; Appendix D: PIN Information
- 43 - Appendix C: Supported File Formats for USB Mode fi le extension containers Video Decoder Audio codec .mpg .mpeg .mpe PS MPEG 1 MPEG PCM MP3 MPEG2 .avi AVI MPEG 1 MPEG PCM MP3 MPEG2 XviD Media File Extension Format Remarks Video Audio (Maximum resolution/Bit rate etc.) Music .mp3 - MPEG 1/2 La...
Page 46 - License Information; nition video signals.; In conformity with the EEE Regulation.
- 45 - License Information HDMI, the HDMI logo, and High-De fi nition Multimedia Interface are trademarks or registered trademarks • of HDMI Licensing, LLC.DVB is a registered trademark of the DVB Project. • [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high...
Page 47 - Questions and Answers; Questions; and; Answers
- 46 - Questions and Answers Below are the answers to some of the most common queries. For more information, go to www.toshiba.co.uk Q Why is there no sound or picture? Q Why don't the controls of the television work? A Check the television is not in standby mode.Check the mains plug and all mains c...
