Page 3 - Software License Agreement
AS/400 Print Solution — Software License Agreement 3 Software License Agreement INSTALLING OR OTHERWISE USING THIS SOFTWARE PRODUCT CONSTITUTES YOUR ACCEPTANCE OF THE FOLLOWING TERMS AND CONDITIONS (UNLESS A SEPARATE LICENSE IS PROVIDED BY THE SUPPLIER OF APPLICABLE SOFTWARE IN WHICH CASE SUCH SEPAR...
Page 5 - Trademarks and Copyright
AS/400 Print Solution — Trademarks and Copyright 5 Trademarks and Copyright Trademarks • Copyright permissions regarding screenshots, pictures and descriptions, included in this document, can be obtained from AXIS Communications AB. • AXIS Communications, AXIS 5570e, AXIS 5570e IPDS SNA and design (...
Page 6 - Disclaimer Notice
6 AS/400 Print Solution — Disclaimer Notice Disclaimer Notice The following notice sets out the exclusions and limitations of liability of TOSHIBA TEC CORPORATION (including its employees, agents and sub-contractors) to any pur-chaser or user (‘User’) of the e-STUDIO520/600/720/850, e-STUDIO281C/351...
Page 7 - Preface; About this guide; Conventions
AS/400 Print Solution — Preface 7 Preface The e-STUDIO520/600/720/850, e-STUDIO281C/351C/451C, e-STUDIO352/452, e-STUDIO202L/232/282, e-STUDIO2500C/3500C/3510C, e-STUDIO165/205, e-STUDIO167/207/237, e-STUDIO523/603/723/853, e-STUDIO353/453, e-STUDIO203L/233/283, e-STUDIO2020C/2330C/2820C/2830C/3520C...
Page 9 - Table of Contents
AS/400 Print Solution — Table of Contents 9 Table of Contents Software License Agreement ......................................................................... 3Trademarks and Copyright ............................................................................. 5Disclaimer Notice..................
Page 11 - AXIS Network Print Server
AS/400 Print Solution — 1. AXIS Network Print Server 11 1. AXIS Network Print Server
Page 12 - Overview; Components
12 AS/400 Print Solution — Overview Overview Components The components of the AS/400 ® Printing Solution are: • AS/400 server • Your equipment • USB cable to connect the AXIS 5570e Print Server and your equipment • AXIS 5570e Print Server • Client PC workstation • Custom Config file (Config_landscap...
Page 13 - Finishing options and logical printers
AS/400 Print Solution — Overview 13 Finishing options and logical printers TOSHIBA offers several finishing options in addition to standard print commands com-ing from the AS/400. For example, stapling and hole punching are finishing options.The finishing options are grouped in several preconfigured...
Page 14 - Installation; Installation procedure; Step 1: Set up the hardware
14 AS/400 Print Solution — Installation Installation Installation procedure Install the AS/400 printing solution in two steps: 1. Set up the hardware 2. Set up the AS/400 printer Step 1: Set up the hardware NOTE: • The controller can be directly connected to the AS/400 network at the same time. Thus...
Page 16 - Click the Configuration Wizard for IBM sessions button.
16 AS/400 Print Solution — Installation NOTE: • To protect the admin pages and the Configuration Wizard from unauthorized use, enter a password (by default set to pass) in the Root Password field under Admin General Settings. • Use the same port number when creating the print device (page 15). Note ...
Page 17 - Configuration; Available AXIS firmware version; Open a Windows command prompt.
AS/400 Print Solution — Configuration 17 Configuration Available AXIS firmware version Use the production release version or service release version given in the following table when using TOSHIBA MFP.All official firmware releases for the AXIS 5570e are available on AXIS website. http://www.axis.co...
Page 19 - Copier model
AS/400 Print Solution — Configuration 19 Copier model When printing portrait data, select an appropriate copier model, e.g. Toshiba eSTUDIO520/600/720/850 or Toshiba eSTUDIO281C/351C/451C.When printing landscape data, select Custom copier driver for Copier model. P.31 "Custom copier driver" ...
Page 20 - Only PCL available
20 AS/400 Print Solution — Configuration Only PCL available In the Configuration Wizard for IBM sessions, select PCL for Printer Driver. PostScript is not available. Edit Session:Only PCL is available for IPDS Printer Driver under Edit Session. PostScript is not available.
Page 21 - Available finisher options
AS/400 Print Solution — Configuration 21 Available finisher options The following options are available for the settings of Logical Printers or Edit Session. Duplex: Edit Session:Long Edge Binding and Short Edge Binding are available for Duplex under Edit Ses-sion.
Page 28 - General settings
28 AS/400 Print Solution — Configuration General settings Select DISABLE for Printer Information and Bidirectional control if extra data, which is specified as "PAGECOUNT", is printed.
Page 29 - IPDS emulator
AS/400 Print Solution — Configuration 29 IPDS emulator IPDS bin under the IPDS Configuration tab is used for setting the paper size. Statement, Ledger, Folio, Hagaki, Letter, Legal, A4 and A3 are available.Executive and Custom are not available. NOTE: • Statement and Hagaki are not supported in e-ST...
Page 31 - Custom copier driver
AS/400 Print Solution — Configuration 31 Custom copier driver When you print landscape data with some finisher options enabled, you may need to use the Custom Copier Driver for correct output. Obtain the information about the Cus-tom copier driver functionality from AXIS COMMUNICATIONS web site. Whe...
Page 32 - Problem Solving; Problems and recommended solutions
32 AS/400 Print Solution — Problem Solving Problem Solving Problems and recommended solutions The following table provides suggestions for resolving printing problems. Customer service For help with AXIS 5570e Print Server questions, go to the AXIS COMMUNICATIONS section of www.axis.com . Problem Re...
Page 33 - WorkStation Customization Object
AS/400 Print Solution — 2. WorkStation Customization Object for TOSHIBA e-STUDIO 33 2. WorkStation Customization Object for TOSHIBA e-STUDIO
Page 35 - Login as a user with QSECOFR authority.
AS/400 Print Solution — Installation 35 Installation Installation procedure Before installing the WorkStation Customization Object for TOSHIBA e-STUDIO, con-figure the system environments as follows: • Set up AS/400 Server under the environment that allows you to use printing func-tions. • Set up a ...
Page 36 - The installation is completed.
36 AS/400 Print Solution — Installation 4. The setting screen for OUTQ appears as the installation is executed. Specify the name of OUTQ (maximum 7 bytes) to be used, its library, the IP address of the printer and default tray type*. Then press the execution key. * default tray type - e-STUDIO5520C/...
Page 37 - The setup is completed.
AS/400 Print Solution — Installation 37 Step 2: Setting up WorkStation Customization Object for TOSHIBA e-STUDIO This section describes how to set up the WorkStation Customization Object for TOSHIBA e-STUDIO. 1. Login as a user with QSECOFR authority. 2. Execute the command below to add a library &#...
Page 39 - The program is started up.
AS/400 Print Solution — Installation 39 4. The program is started up. • Execute a command [WRKACTJOB] to display the list. If the status of this pro-gram is displayed as "DEQA" in the list, the program is properly started up. • If the name of OUTQ to be monitored or a job queue to be used is...
Page 40 - Uninstallation; Uninstallation procedure
40 AS/400 Print Solution — Uninstallation Uninstallation Uninstallation procedure Step 1: Uninstalling WorkStation Customization Object for TOSHIBA e-STUDIO 1. Execute a command [WRKACTJOB] and then select a resi-dent OUTQ monitoring program. Then enter option "4". Now the resident program e...
Page 41 - Execute a command [ENDWTR OUTQ name
AS/400 Print Solution — Uninstallation 41 2. Execute a command [DLTOUTQ OUTQ(library name / OUTQ name *1 )] to delete the OUTQ specified at the installation. *1: It shall be the OUTQ name specified at the installation or the setup. 3. Execute a command [ENDWTR OUTQ name *1 01*IMMED] to disconnect th...
Page 42 - Execute a command [WRKOUTQ OUTQ name
42 AS/400 Print Solution — Uninstallation NOTE: • The part "01" after the OUTQ name shall be changed from "01" through "07" as you repeat this command seven times. 4. Execute a command [WRKOUTQ OUTQ name *1 *] to confirm that no spool remains. *1: It shall be the OUTQ name sp...
Page 44 - Operation; Operational procedure; Perform routine work.
44 AS/400 Print Solution — Operation Operation Operational procedure Follow the procedure below to operate the WorkStation Customization Object for TOSHIBA e-STUDIO. 1. Specify print file script (ORIENTATION, STAPLE, DUPLEX and DRAWER) for a document to be printed with the MFP. For the details of fi...
Page 45 - Print file script
AS/400 Print Solution — Operation 45 Print file script Specify print file script below according to the printing style of a document to be printed with an MFP. Example: The examples of commands for print file script are as follows: Portrait + DUPLEX SHORT_EDGE + STAPLE TOP_LEFT: CHGPRTF FILE (librar...
Page 46 - Portrait
46 AS/400 Print Solution — Operation LONG_EDGE: DUPLEX(*YES) SHORT_EDGE: DUPLEX(*TUMBLE) ABCD EFG Portrait ABCD EFG Landscape ABCD E... ABCD EFG ABCD EFG ABCD EFG ABCD E... ABCD EFG Portrait Landscape
Page 47 - Appendix; Stapling specifications
AS/400 Print Solution — Appendix 47 Appendix Stapling specifications *1: OUTQ numbers assigned by resident programs. OUTQ*1 Printing Specifications Available Sizes Remarks Por- trait/ Land- scape STAPLE LT LG LD A3 A4 FO COM ST 1 xxxxxxx01 Portrait OFF 9 9 9 9 9 9 9 9 Rotational degrees PAGRTT = *AU...
Page 48 - Printing character size - Reference values
48 AS/400 Print Solution — Appendix Printing character size - Reference values * All paper sizes noted “-R” are rotated in “PAGRTT (90)”. Paper Size CPI Line Char. Remarks LT CPI(10) 66 80 CPI(15) 66 120 LT-R CPI(10) 51 110 CPI(15) 51 163 Number of characters: 158 LG CPI(10) 84 80 CPI(15) 84 120 LG-...
Page 49 - Glossary; Definitions of Terms
AS/400 Print Solution — Glossary 49 Glossary Definitions of Terms Term Definition DLC D ata L ink C ontrol, the data link layer protocol. Duplex The process of printing on both sides of a sheet of paper. Finishing option A feature provided by TOSHIBA printers and copiers for doing such things as sta...
