Page 2 - WARNING; WARNING; The Issue; It Makes A Diffe
2 Dear Customer, Thank you for purchasing this Toshiba LCD TV. This manual will help you use the many exciting features of your new LCD TV. Before operatin g your LCD TV, please rea d this manual completely , and keep it nearby for future reference. WARNING To prevent injury, this apparatus must be ...
Page 3 - Important Safety Instructions; Additional Safety Precautions
3 Important Safety Instructions 1) Rea d these instructions. 2) Keep these instructions. 3) Hee d all warnin g s. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with d ry cloth. 7) Do not block any ventilation openin g s. Install in accordance with the manufacture...
Page 4 - Care
4 • Ensure that the TV is not hanging over the edge of the supporting furniture. • Never place the TV on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the TV to a suitable support • Never stand the TV on cloth or other material placed between the TV an...
Page 5 - Service; Choosing a location for your LCD TV; To Display your LCD TV using a Wall Bracket:
5 volatile compounds such as insecticide on the TV surface. Such products may damage or discolor the TV. 38) Never hit, press, or place anything on the back cover. These actions will damage internal parts. 39) Never spill liquids or push objects of any kind into the TV cabinet slots. 40) During a li...
Page 6 - Removing the Pedestal Stand; Safety Precautions for 3D glasses; Caution; About the 3D; Cautions on watchin
6 Removing the Pedestal Stand 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface. Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel....
Page 7 - FCC Compliance Statement; Wireless Radio
7 • For optimal 3D effect an d to avoi d eye fati g ue it is important that you properly select your viewin g position. The best viewing position is at the indicated viewing distance with your eyes at the same level as the center of the display as shown below. The center of the optimum viewing area ...
Page 8 - Canada - Industry Canada Statement; ENERGY STAR
8 Canada - Industry Canada Statement This device complies with RSS-210.Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation of the...
Page 9 - Trademark Information
9 Trademark Information • Manufactured under license from Dolby Laboratories.Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. • Audyssey Dynamic Volume ® controls volume levels to eliminate loud spikes and raise soft dialog for more enjoyable television and movie viewin...
Page 10 - Contents
10 Contents Impo r tant Safety Inst r uctions . . . . . . . . . . . . . . . . . . . . . . 3 Installation, Ca r e, and Se r vice . . . . . . . . . . . . . . . . . . . . . 3 Choosing a location fo r you r LCD TV . . . . . . . . . . . . . . . . . 5 Safety P r ecautions fo r 3D glasses . . . . . . . . ....
Page 12 - Chapter 1: Introduction; Features
12 Chapter 1: Introduction Features • Integrated digital tuning (8VSB ATSC and QAM) eliminates the need for a separate digital converter set-top box (in most cases). • 1080p output resolution. • Four HDMI ® digital, High-Definition Multimedia Interfaces with 1080p input support ( - p. 17). • HDMI ca...
Page 13 - Front panel control
13 Chapter 1: Introduction Front panel control Examples show Model 32TL515U. Back panel connections For explanations of cable types and connections, see p. 15–23. TV f r ont Bri g htness S ensor This sensor will detect the ambient light conditions to optimize the backlighting levels ( - p. 57). Touc...
Page 14 - Bundling the cables; Stand type
14 Chapter 1: Introduction Bundling the cables Install the cable clamps and bundle the cables in them. Stand type Wall Mount type Cable Clamps Cable Clamps
Page 15 - Chapter 2: Connecting your TV; Overview of cable types; Component video cables; HDMI; Dual-wand IR blaster cable; DI; PC IN; Standard/Crossover LAN cable; About the illustrations
15 Chapter 2: Connecting your TV Overview of cable types Before purchasing cables, know the connector types your devices require.You can purchase cables from most stores that sell audio/video devices. Coaxial cable (F-type) (F-type) Connects your antenna, cable TV service, or cable converter box to ...
Page 16 - Connecting to a Satellite dish, an Antenna, or Cable TV; Color
16 Chapter 2: Connecting your TV Connecting to a Satellite dish, an Antenna, or Cable TV IN OUT CH 3CH 4 VIDEO OUT AUDIO OUT COMPONENT VIDEO L R S atellite IN P B P R Y TV back panel VHF/UHF Antenna Cable TV Satellite r eceive r with component video Satellite dish Coaxial cable Component video cable...
Page 17 - Connecting an HDMI; To connect an HDMI device, you will need:; To view the HDMI device video:
17 Chapter 2: Connecting your TV Connecting an HDMI ® or DVI device to the HDMI input HDMI OUT DVI /HDCP OUT AUDIO R L OUT TV back panel HDMI device DVI device HDMI cable Analog audio cable HDMI-to-DVI adapter cable The HDMI input on your TV receives digital audio and uncompressed digital video from...
Page 18 - Connecting a VCR or DVD player with ColorStream; To view the DVD player:
18 Chapter 2: Connecting your TV Connecting a VCR or DVD player with ColorStream ® (component video) VIDEO AUDIO L R COMPONENT VIDEO P B P R Y AUDIO OUT L R R W Y G B R W Y R W R B R W Y R W R G B G W TV back panel Component adapter cable (supplied) Standardaudio cable Component video cable DVD play...
Page 19 - Connecting remote IR devices; Using the IR OUT terminal; To set the IR OUT mode:
19 Chapter 2: Connecting your TV Connecting remote IR devices Using the IR OUT terminal You can use the TV’s IR OUT terminal to remotely operate many infrared remote-controlled devices enclosed in an entertainment center or similar cabinet. You will need: • Dual-wand IR blaster cable ( - p. 15) • Ot...
Page 20 - To set the IR IN mode:; Connecting a digital audio system; Before controlling the audio:
20 Chapter 2: Connecting your TV Using the IR IN terminal For additional control options for your home theater system, you can connect an IR receiver/repeater control system (not included) to the TV’s IR IN terminal. You will need: • IR cable To set the IR IN mode: 1 > S ettin g s > PREFERENCE...
Page 21 - Using the TV remote and HDMI; To connect an audio receiver and playback devices, you will need:; Before controlling the devices:; When using an external AV amplifier:; Connecting an HDMI audio system
21 Chapter 2: Connecting your TV Using the TV remote and HDMI ® CEC Control to control other devices To control the basic functions of connected audio/video devices using the TV’s remote control, connect an HDMI ® CEC compatible audio receiver or playback device. The HDMI ® CEC Control feature uses ...
Page 22 - Connecting a PC; Connecting to the TV’s PC IN terminal; Signal names for mini D-sub 15-pin connector; Connection to the TV’s HDMI terminal
22 Chapter 2: Connecting your TV Connecting a PC You can view your PC’s display on the TV and hear the sound from the TV’s speakers. Connecting to the TV’s PC IN terminal You will need: • Analog RGB (15-pin) computer cable• Analog audio cable Before using the PC: See “Using your PC with the TV” ( - ...
Page 23 - Connecting to a home network
23 Chapter 2: Connecting your TV Connecting to a home network The LAN port allows your Toshiba TV to connect to your home network.You can use this home network to access photos, movies, and music files that are stored on a DLNA CERTIFIED ™ Server and play them on your TV. Connecting the TV directly ...
Page 24 - Chapter 3: Using the remote control; Controlling other devices
24 Chapter 3: Using the remote control Controlling other devices The TV’s remote control can operate other devices such as cable converter boxes, satellite receivers, VCRs, DVD players, and HTIBs (home theater in a box). Toshiba devices: The remote is programmed to operate a variety of devices ( - p...
Page 25 - Learning about the Remote Control
25 Chapter 3: Using the remote control Learning about the Remote Control Only the buttons used to operate the TV are described in this section. For the HDMI ® CEC Control functions, see “Using HDMI ® CEC Control” ( - p. 46). For a complete list of the remote’s functions, see “Remote control function...
Page 26 - Chapter 4: Initial Setup and Menu; Initial Setup
26 Chapter 4: Initial Setup and Menu Initial Setup When you first turn on or reset the TV, the Initial Setup window will appear. Note: • You can stop Initial Setup by pressing . However, if you do not finish Initial Setup, the Initial Setup screen will appear every time you turn on your TV. To finis...
Page 27 - If some channels are not found after scanning:; Navigating the menu system
27 Chapter 4: Initial Setup and Menu 6 Start Scan Note: If you want to stop scanning, press while scanning. • After scanning is complete, a channel list screen (such as the one below) will appear. Press or . Note: Encrypted channels cannot be registered though these are displayed in the above list. ...
Page 28 - Main menu layout
28 Chapter 4: Initial Setup and Menu Main menu layout To open the main menus (illustrated below), press on the remote control or TV control panel. 1st Laye r 2nd Laye r 3 r d Laye r Page Network NET TV 67 Network Setup 63 Wireless Information 64 Media Player Photo (Device select) 74 Movie (Device se...
Page 29 - Quick menu
29 Chapter 4: Initial Setup and Menu Quick menu Quick menu helps you access some options more quickly.Press to display the Quick menu and press B or b to select an option. Note: Quick menu items differ depending on the current mode. Settings SETUP Menu Language 30 ANT/CABLE In 30 Auto Tuning 30 Manu...
Page 30 - Chapter 5: Setting up your TV; How to navigate the menu:; Changing Initial settings; From individual settings:; Menu language
30 Chapter 5: Setting up your TV How to navigate the menu: > Settings > Main menu > Submenu > Changing Initial settings From Quick Setup: 1 > S ettin g s > S ETUP > Quick S etup > . 2 A confirmation message appears. Press C or c to select Yes . Press . 3 For changing settings...
Page 31 - Manual Tuning; Skipping channels; Skipping video inputs
31 Chapter 5: Setting up your TV 1 > S ettin g s > S ETUP > Auto Tunin g > . A confirmation screen appears. 2 Press to start Auto Tuning or to abort. The TV cycles through all the channels and stores all active channels in memory. To view the programmed channels, press or . Manual Tuning...
Page 32 - Labeling channels; Labeling video inputs; Configuring shared inputs; Side Shared Audio
32 Chapter 5: Setting up your TV Labeling channels You can label analog TV channels. 1 > S ettin g s > S ETUP > TV S ettin g s > . 2 Press B or b to select Channel Options . Press . The list of channels appears. 3 Press B or b to select a channel to label. 4 Press . The Software Keyboard...
Page 33 - Setting the Auto Input feature; To turn off Auto Input:
33 Chapter 5: Setting up your TV Setting the Auto Input feature You can change TV inputs using the MODE S ELECT buttons on the remote control: TV , CABLE/ S AT , BD / DVD , AUX . After setting an input for a specific MODE S ELECT button, the TV automatically switches to the input when you press and ...
Page 34 - Chapter 6: Basic features; Viewing 3D images; Before using the 3D function, note the following.; If you want to obtain extra 3D glasses:; About the connecting cable:
34 Chapter 6: Basic features Viewing 3D images Before using the 3D function, note the following. In addition to compatible 3D glasses, viewing 3D programming requires the following (which are not included): • Compatible 3D playback device or 3D source.• 3D capable HDMI cable. If you want to obtain e...
Page 35 - Using 3D functions; Switching display mode or selecting 3D format; The 3D button’s operation:
35 Chapter 6: Basic features Using 3D functions Incoming video signals can either be in 2D or 3D format. A 2D signal can be viewed in either 2D or 3D, and 3D can be viewed in either 2D or 3D. If the TV can detect the fact that a signal is 3D, it can change to 3D mode automatically – see “3D Auto Sta...
Page 36 - To switch to 3D mode:
36 Chapter 6: Basic features To switch to 3D mode: • Set 3D Auto S tart to 3D . • Press and select 3D while viewing 2D mode or Native mode. * Correct 3D image To select 3D format from the Quick menu in 3D mode: 1 > 3D S ettin g s > . 2 Press B or b to select 3D Format S elect . Press . 3 Press...
Page 37 - To switch to Native mode:; To switch to 2D to 3D mode:; Setting the auto start mode; To enter a new PIN code:; To change or delete your PIN code:; Setting the 3D Start Message
37 Chapter 6: Basic features To switch to Native mode: • Press while viewing 3D mode. • Press while viewing 2D to 3D mode. Note: When 3D format signal with 3D Auto Detect Information is received, it is not possible to switch to Native. • From the Quick menu in 2D mode. 1 > 3D S ettin g s > . 2...
Page 38 - From the Quick menu:
38 Chapter 6: Basic features Setting the 3D Lock When this feature is set to On , you must enter 3D PIN code for changing display mode to 3D mode or 2D to 3D mode. 1 > S ettin g s > PREFERENCE S > 3D S etup > . 2 Press B or b to select 3D S afety S ettin g s . Press . 3 Enter your 4-digi...
Page 39 - Tuning channels; Setting the Channel Tuning Mode; Using the Channel Browser; To set up the Channel Browser; To open the Channel Browser
39 Chapter 6: Basic features Tuning channels Setting the Channel Tuning Mode You can select how tuning is handled for analog and digital channels when the TV is in Antenna mode. Note: To use this feature, ANT/CABLE In must be set to Antenna ( - p. 30). 1 > S ettin g s > S ETUP > TV S ettin ...
Page 40 - History; Favorites Browser
40 Chapter 6: Basic features Elements of the Channel Browser ™ 1 Channels stored in the History List 2 Channel or input that is currently highlighted in the browser 3 Inputs or channels labels 4 Input type 5 Current list ( History , ANT/CABLE , Inputs , Favorites , or HDMI-CEC Control ) 6 Channel or...
Page 41 - Using Channel Return; To memorize a channel to the; Selecting the video input to view; To select the video input to view:
41 Chapter 6: Basic features Using Channel Return You can switch between two channels without entering a channel number each time. This feature also works for external inputs. 1 Select the first channel you want to view. 2 Select a second channel using the Channel Number buttons (and the dash ( ) bu...
Page 42 - Using closed captions; Analog CC mode; Using the Closed Caption button
42 Chapter 6: Basic features Using closed captions To turn on the closed caption mode: 1 > S ETUP > TV S ettin g s > . 2 Press b or B to select Close d Captions S ettin g s . Press . 3 Press b or B to select Close d Captions . 4 Press C or c to select On . Note: If Closed Captions is set to...
Page 43 - Setting the PIN code; Entering a new PIN code; Forgotten PIN code; Using parental controls
43 Chapter 6: Basic features Setting the PIN code A PIN code is necessary for some menus. Note: The Parental Control and Locks menu is grayed out if no PIN has been set. Entering a new PIN code 1 > S ettin g s > PREFERENCE S > PIN S ettin g > . 2 Use the number buttons to enter a 4-digit...
Page 44 - Rating system
44 Chapter 6: Basic features Downloading an additional rating system In the future, an additional rating system may become available for use in selectively blocking TV programs and movies. Note: The currently tuned station must be receiving a digital signal before an additional rating system can be ...
Page 45 - Displaying ratings; Locking specific channels; Locking video input
45 Chapter 6: Basic features Note: • If you place an “ 5 ” in the box next to “ Rated “None” ”, programs rated “ None ” or “ Not Rated ” will be blocked; Programs that do not provide any rating information will not be blocked. Displaying ratings To display the rating of the program you are watching,...
Page 46 - Setting a time limit for games; To deactivate the Input Lock once the GameTimer; Locking the control panel; To unlock the control panel:; Using HDMI; To set HDMI
46 Chapter 6: Basic features Setting a time limit for games You can use the GameTimer ® to set a time limit for playing a video game. When the time expires, the TV locks all external inputs. 1 > S ettin g s > PREFERENCE S > Parental Control an d Locks > . (Another: > Timer > G ameT...
Page 47 - Available remote control key functions:
47 Chapter 6: Basic features Controlling HDMI ® CEC playback devices With your TV’s remote control, you can control the connected HDMI ® CEC playback device (DVD player, etc.) you are watching. Available remote control key functions: Before using these key functions, set the MODE SELECT switch on th...
Page 48 - Adjusting the amplifier’s audio; Other HDMI; Using the HDMI; Viewing the HDMI
48 Chapter 6: Basic features Adjusting the amplifier’s audio Using the TV’s remote control, you can adjust or mute the sound volume of your amplifier.• adjust the volume level. • turns off the sound. Note: This feature is available when Amplifier Control is set to On. 1 > S ettin g s > PREFERE...
Page 49 - Using your PC with the TV; Adjusting the image; To reset PC Settings:; Setting the PC audio; Setting the timer to turn on the TV; To activate the timer:
49 Chapter 6: Basic features Using your PC with the TV Adjusting the image If the edges of the picture are hidden, readjust Horizontal Position and Vertical Position . If the picture is affected by interference, readjust Clock Phase and S amplin g Clock . 1 Select PC input mode ( - “Selecting the vi...
Page 50 - Setting the sleep timer; Using the remote control:; To display the time remaining until the TV turns off:; Setting Automatic Power Down; Setting No Signal Power Down
50 Chapter 6: Basic features Setting the sleep timer You can set the TV to turn off after a specific amount of time (maximum = 12 hours). Using the remote control: 1 Press [ 2 Set the time until the TV turns off. • Repeatedly press [ to increase the time. • Press B or b to increase or decrease the t...
Page 51 - Displaying TV status information; To display TV status information:; Viewing support information; To cancel the reset:; Power failure
51 Chapter 6: Basic features Displaying TV status information To display TV status information: Press .The following information will be displayed (if applicable):• Current input ( ANT/CABLE , Vi d eo , etc.) • Either “CABLE” (for cable TV) or “ANT” (for over- the-air broadcasts), if ANT/CABLE is th...
Page 52 - Chapter 7: Picture and sound controls; Selecting the picture size; To select the picture size:
52 Chapter 7: Picture and sound controls Selecting the picture size You can view many program formats in several picture sizes— Native , 4:3 , Full , TheaterWi d e 1 , TheaterWi d e 2 , TheaterWi d e 3 , Normal , and Dot by Dot . Note: The picture size illustrations are examples only. The format of ...
Page 54 - Scrolling the picture; Using the Auto Aspect feature; Using the 4:3 Stretch; Freezing the picture
54 Chapter 7: Picture and sound controls Scrolling the picture If the edges of the picture are hidden, you can adjust the image’s position. Note: • You can adjust the picture position when the picture size is set to TheaterWide 2 or TheaterWide 3 . • When viewing DTV, NET TV, or Media Player, this f...
Page 55 - Adjusting the picture; Selecting the picture mode; To adjust the picture quality:
55 Chapter 7: Picture and sound controls Adjusting the picture Selecting the picture mode You can select your desired picture settings from the modes described below. Note: • PC mode is available for HDMI and PC inputs only (not displayed for other input sources). • Game mode cannot be turned on whe...
Page 56 - Edge Enhancer; To set Edge Enhancer:; Dynamic Contrast; To adjust the static gamma settings:; Film Stabilization
56 Chapter 7: Picture and sound controls Using the advanced picture settings features Note: Some of the Advanced Picture Settings features will not be available for adjustment when the Picture Mode is set to AutoView . Edge Enhancer The Edge Enhancer feature lets you adjust the levels for your desir...
Page 57 - MPEG NR; DNR; dd; Auto Brightness Sensor
57 Chapter 7: Picture and sound controls ClearScan 240 ™ This feature provides smoother motion and a crisper image. 1 > S ettin g s > PICTURE > A d vance d Picture S ettin g s > . 2 Press B or b to select Clear S can 240 . 3 Press C or c to select On . Press . Note: If the Picture Mode i...
Page 58 - Setting the Expert Picture Settings; Window Display
58 Chapter 7: Picture and sound controls ColorMaster ™ The ColorMaster ™ feature allows you to adjust standard colors. 1 > S ettin g s > PICTURE > A d vance d Picture S ettin g s > . 2 Press B or b to select ColorMaster , press C or c to select On . Press . Base Color Adjustment When Col...
Page 59 - Resetting to the factory default; Locking the picture settings; Muting the sound; Selecting stereo/SAP broadcasts; To listen in stereo sound:
59 Chapter 7: Picture and sound controls Setting Type You can adjust the white balance setting. 1 > S ettin g s > PICTURE > Expert Picture S ettin g s > . 2 Press B or b to select White Balance . Press . 3 Press C or c to select 2P White Balance . Press . 4 Press B or b to select Re d -O...
Page 61 - Using advanced sound features; Using surround sound; ettin
61 Chapter 7: Picture and sound controls Using advanced sound features Using surround sound Voice Enhancement and Dynamic Bass Boost help to create a thrilling surround sound experience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer, and wider. Note: Surrou...
Page 62 - Chapter 8: Advanced features; Using your home network; When using a Wireless network connection:; Using in a wireless LAN environment:
62 Chapter 8: Advanced features Using your home network • This TV is a DLNA CERTIFIED ™ Player. It can play digital content stored on a DLNA CERTIFIED ™ product with server functions. If you want to use this TV as a DLNA CERTIFIED ™ Player, you will have to configure the network settings on your TV ...
Page 63 - Setting up the Network; Wireless Setup; There are 3 methods for wireless setup:; Easy Setup using PBC (Push Button Configuration); To cancel searching for the AP:; Assisted Setup
63 Chapter 8: Advanced features Setting up the Network You can select the Network Type. 1 > S ettin g s > PREFERENCE S > Network S etup > . (Another: > Network > Network S etup > .) 2 Press B or b to highlight Network Type . 3 Press C or c to select Wire d or Wireless . 4 If you...
Page 65 - Advanced Network Setup; IP Address Setup
65 Chapter 8: Advanced features Advanced Network Setup Note: • When the DHCP function of the router connected to this TV is On, you can set Auto Setup to On or Off. (Usually set it to On .) • When the DHCP function of the router is Off, set Auto Setup to Off , and manually set the IP Address or DNS ...
Page 66 - Network Connection Test; To cancel Network Connection Test:; Using the software keyboard; To enter text using the software keyboard:
66 Chapter 8: Advanced features Network Connection Test This function checks Internet connectivity. 1 > S ettin g s > PREFERENCE S > Network S etup > . 2 Press B or b to select Network Connection Test . Press . Note: A message will appear to indicate whether the connection was successful...
Page 67 - Performing a Software Upgrade; Before downloading software:; Viewing the Software Licenses; NET TV menu
67 Chapter 8: Advanced features Performing a Software Upgrade TOSHIBA may offer upgrades for the TV's software in the future. The TV's software is upgraded via Internet connection. Before downloading software: Configure your TV to connect to the Internet. Note: • You will not be able to use the TV s...
Page 68 - After completing the Guided Setup:; Netflix; Watching movies with Netflix; VUDU; To deactivate your device:
68 Chapter 8: Advanced features Guided Setup The first time you use Yahoo! TV Widgets this step-by-step wizard begins with the Welcome Screen. 1 Select Let's g et starte d ! If you select Exit S etup now, this step will resume the next time you press . 2 Follow the onscreen instructions. After compl...
Page 69 - CinemaNow; To close Blockbuster:; Pandora; dg
69 Chapter 8: Advanced features • Content that the user may feel is improper or offensive may be included in the contents of YouTube. • We do not assume any responsibility for contents that YouTube offers. • If you have any questions about YouTube contents, please contact YouTube, LLC. • The content...
Page 70 - Using the Profile Widget; Using other Yahoo! Widgets
70 Chapter 8: Advanced features To close Yahoo! TV Widgets: Press . Note: • To use Yahoo! TV Widgets you must first complete the “Guided Setup” ( - p. 68). • If 3D signal format with 3D Auto Detect Information is received while using this feature, the screen is closed. To use this function again: 1 ...
Page 71 - Using the Media Player; Media Player Specifications; Device; Basic operation; Using Media Player with USB; To change the Auto Start setting:; To select a file in the list of contents:
71 Chapter 8: Advanced features Using the Media Player This TV allows you to access photos, movies, and music files stored on a USB device.Moreover, you can also access photos, movies, and music files from your TV or PC by connecting the TV to your home network. Term meaning: DMP: DLNA CERTIFIED ™ P...
Page 72 - Using Media Player with DLNA CERTIFIED; Viewing Movie files; To play in fast reverse or fast forward:
72 Chapter 8: Advanced features Using Media Player with DLNA CERTIFIED ™ Server You need to configure a home network before using this feature ( - p. 23). 1 > Settings > APPLICATIONS > Media Player > . (Another: > Media Player > .) 2 Press B or b to select Photo , Movie , or Music ...
Page 73 - To set the repeat mode:; USB use; Playing Music files
73 Chapter 8: Advanced features To set the repeat mode: 1 Press . The current repeat setting appears. 2 Press C or c to select Off , All , or 1 . 3 Press . The setting is effective until the TV is turned off. To display the file status information: 1 Press Q during playback. The information will be ...
Page 74 - Viewing Photo files
74 Chapter 8: Advanced features To set the repeat mode: 1 Press . The current repeat setting appears. 2 Press C or c to select Off , All , or 1 . 3 Press . The setting is effective until the TV is turned off. To display the file status information: 1 Press Q during playback. The information will be ...
Page 75 - To set the mode settings:
75 Chapter 8: Advanced features To set the mode settings: 1 Press to open the Quick menu while in Single View mode or Slideshow mode. 2 Press B or b to select the item ( S OUND , Interval Time , Repeat , Back g roun d Music , or S peakers ). 3 Press C or c to adjust the setting. 4 Press to return to...
Page 76 - Using the Wallpaper feature; To close the Wallpaper:; Photo Select; Photo Edit; Auto Power Off
76 Chapter 8: Advanced features Using the Wallpaper feature This feature allows you to display a photo file stored on the TV.• Only one photo file can be stored on the TV.• The photo file can be overwritten with a file from an external device (USB, DMS). 1 > S ettin g s > PREFERENCE S > Wal...
Page 77 - Chapter 9: Troubleshooting; General troubleshooting
77 Chapter 9: Troubleshooting General troubleshooting Before calling a service technician, please check this chapter for a possible cause of the problem and some solutions you can try. Black box onscreen • The clo s ed captio n feat ur e i s s et to o n e of the Text mode s ( T1 , T2 , T3 , o r T4 )...
Page 78 - For HDMI cables
78 Chapter 9: Troubleshooting Remote control problems • E nsur e the r emote co n t r ol i s s et to the co rr ect device mode ( - p. 88). • Remove all ob s t ru ctio ns betwee n the r emote co n t r ol a n d the TV. • Replace the r emote co n t r ol’ s batte r ie s ( - p. 24). • Yo ur TV’ s r emote...
Page 79 - The DMS name is not displayed; Wireless network problems; For DLNA CERTIFIED
79 Chapter 9: Troubleshooting – Connect with LAN cables, if possible, and check connection stability. – Repeat the wireless network setup procedure and check connection stability. The DMS name is not displayed • The LAN cables, if used, are not connected properly ( - p. 23). • The WLAN, if used, is ...
Page 80 - LED indications; No light
80 Chapter 9: Troubleshooting LED indications The POWER and Service LED lights on the front of the TV indicate the TV’s status, as described below. POWER On/Standby LED• Green The TV is operating properly. • No light The power is off or standby. • Green blinks - System booting. After a while, the sc...
Page 81 - Specifications; ColorStream
81 Chapter 10: Appendix Specifications Note: • This model complies with the specifications listed below. • Designs and specifications are subject to change without notice. • This model may not be compatible with features and/or specifications that may be added in the future. Television System NTSC s...
Page 82 - Supplied Accessories; Optional Accessories; To obtain optional accessories:
82 Chapter 10: Appendix Supplied Accessories • Easy Setup Guide• Pedestal assembly installation manual• Stop/Quick set up guide• Remote control with two “AA” size batteries• Mounting screw Use this screw to secure the TV. See item 26 on p. 4. • Securement Clip Use this clip to attach the TV to a wal...
Page 83 - Acceptable signal formats for PC IN, HDMI, and 3D; PC IN signal formats
83 Chapter 10: Appendix Acceptable signal formats for PC IN, HDMI, and 3D PC IN signal formats Note: • The PC IN on this TV only accepts signal formats which are compliant with VESA-DMT as in the table below. Since some PCs input signals are different from the resolution and frequency described in t...
Page 84 - HDMI signal formats
84 Chapter 10: Appendix HDMI signal formats Note: • The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA-DMT as in the table below. Since some PC, HDMI, or DVI device input signals are different from the resolution and frequency described...
Page 86 - Remote control functional key chart
86 Chapter 10: Appendix Remote control functional key chart REMOTE CONTROL KEY Toshiba TV CABLE SAT (satellite) Blu- r ay ™ DVD/DVD-R VCR Recive r / Amp CD GAME Game --- --- --- --- --- --- --- POWER Power Power Power Power Power Power Power Power LIGHT --- MODE SELECT Remote control device mode sel...
Page 88 - Operating other devices; Device code setup; AT; AUX
88 Chapter 10: Appendix Operating other devices Your TV remote control has one dedicated TV mode and three programmable multi-brand modes: CABLE/ S AT , BD/DVD , and AUX . Note: To operate a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must prog...
Page 89 - Searching for a device code; Locking the volume keys; To lock the remote’s volume keys to a specific mode:; Clearing the remote’s programming
89 Chapter 10: Appendix Searching for a device code If you do not know the device code for a particular device, you can view each available code for that device mode and sample the functions to find the code that operates the target device. 1 Press a mode select button on the remote. 2 While holding...
Page 92 - DVD
92 Chapter 10: Appendix Blu-ray Disc ™ DVD SCIENTIFIC ATLANTA 0045, 0063, 0045 SIGNAL 0036 SIGNATURE 0078 SL MARX 0036 STANDARD 0032 STAR SIGHT 0047 STAR TRAK 0058 STARCOM 0081, 0123 STARGATE 0036 TANDY 0080 TELEVIEW 0036 TEXSCAN 0032 TIME WARNER 0045 TOCOM 0065, 0062 TOSHIBA 0049 TV86 0086 UNIKA 00...
Page 93 - DVD Recorders
93 Chapter 10: Appendix DVD Recorders LITEON 1109, 1118, 1015 MAGNAVOX 1061, 1130, 1117, 1131, 1158, 1177, 1178 MARANTZ 1061, 1093, 1130, 1077, 1078, 1157, 1158, 1167, 1176 MEDION 1015, 1048 MEMOREX 1005, 1048 MERIDIAN 1061 MICROSOFT 1079 MINTEK 1094 MITSUBISHI 1094, 1034, 1035 MUSTEK 1100, 1170 MYR...
Page 95 - CD
95 Chapter 10: Appendix CD NEC 2024, 2011, 2012, 2081, 2034, 2050, 2017, 2021, 2020 NEXXTECH 2042 NIKKO 2033 NOBLEX 2007 OLYMPUS 2046 OPTIMUS 2033, 2007, 2014, 2033, 2063, 2014, 2062 OPTONICA 2007, 2092 ORION 2003, 2005 PANASONIC 2014, 2014, 2046, 2060 PENTAX 2030, 2021, 2077 PHILCO 2056, 2060, 2047...
Page 97 - Limited United States Warranty; for LCD Televisions
97 Chapter 10: Appendix Limited United States Warranty for LCD Televisions Toshiba America Information Systems, Inc. (“TAIS”) makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING ...
Page 98 - for Toshiba Brand Flat Panel Televisions; Limite
98 Chapter 10: Appendix THE EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED, THE FOREGOING LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND SIMILAR OBLIGATIONS OF TAIS WITH RESPECT TO THE REPAIR OR REPLACEMENT ...
Page 99 - Arbitration an
99 Chapter 10: Appendix that do not provide for direct and immediate access to the product for service purposes. Labour charges for set installation, setup, adjustment of customer controls, and installation or repair of antenna systems are not covered by these warranties. Reception problems caused b...
Page 101 - Index; Numerics
101 Index Numerics 3D format ........................................ 353D functions 3D Lock ................................... 38 3D PIN ..................................... 37 3D Start Message .................... 37 3D Timer Lock ......................... 38 Auto start ............................
