TOA HB-1 - Manual
TOA HB-1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – When Installing the Unit; accidents that could result in personal injury.; When the Unit is in Use; WARNING; SAFETY PRECAUTIONS; regarded as very important precautions are included.; Safety Symbol and Message Conventions; CAUTION
- Page 3 – GENERAL DESCRIPTION; provisions for wire or bolt suspension.; HANDLING PRECAUTIONS
- Page 4 – Mounting screws/washers
- Page 5 – appropriate for the frame lumbers.; [When mounting the bracket to the ceiling panel]; Bolt suspension: Mount the supplied anchor piece
- Page 6 – prevent resonance noise.
- Page 7 – shown in the figure.; Note: After completing all of the above steps, check to ensure
- Page 9 – MATCHING TRANSFORMER INSTALLATION; Step 6. Choose an appropriate impedance indication
- Page 10 – CROSSOVER CONNECTIONS WITH A FULL-RANGE SPEAKER; • The following filter settings are recommended
- Page 11 – CAUTIONS CONCERNING HIGH-IMPEDANCE APPLICATIONS; Note
- Page 12 – • Accessories
OPERATING INSTRUCTIONS
SUB-WOOFER SYSTEM
HB-1
Please follow the instructions in this manual to obtain optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS
............................................................................... 2
2. GENERAL DESCRIPTION
............................................................................ 3
3. FEATURES
......................................................................................................... 3
4. HANDLING PRECAUTIONS
......................................................................... 3
5. NOMENCLATURE AND DIMENSIONS
..................................................... 3
6. INSTALLATION
6.1. Contents ........................................................................................................... 4
6.2. Flush Wall or Ceiling Mounting ....................................................................... 4
6.3. Suspending the Unit in the Ceiling .................................................................. 8
7. MATCHING TRANSFORMER INSTALLATION
..................................... 9
8. CROSSOVER CONNECTIONS
WITH A FULL-RANGE SPEAKER
8.1. Recommended Filters for the HB-1 ................................................................ 10
8.2. Level Balance and Polarity ............................................................................. 10
9. CAUTIONS CONCERNING
HIGH-IMPEDANCE APPLICATIONS
........................................................ 11
10. SPECIFICATIONS
........................................................................................... 12
Accessories ............................................................................................................ 12
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 When Installing the Unit • Install the unit only in a location that can structurally support the weight of the unit and the mounting bracket. Doing otherwise may result in the unit falling down and causing personal injury and/or property damage. • Use nuts and bolts that are appropriate for the ce...
3 2. GENERAL DESCRIPTION The TOA HB-1 is a high-power, wall/ceiling-mounted sub-woofer system employing a 20 cm speaker unit.Although small in size, the HB-1 provides clear super-low frequency sound reproduction thanks to its AcousticSuper Woofer enclosure construction. 3. FEATURES • A large, 110 mm...
4 6. INSTALLATION 6.1. Contents Check to be sure that the following components are available in a complete set before installation: Speaker ..... 1 Stud holder ..... 4 Masking tape ..... 4 "Short"... 2 "Long"... 2 Cutout template ..... 1 Mounting screws/washers Tapping screw (3x8) .....
