TOA WM-5270UHF - Manual
TOA WM-5270UHF – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – REPLACING THE BATTERY; Replace the microphone grip by sliding and rotating it clockwise.; Battery replacement; • W h e n t h e b a t t e r y c a p a c i t y b e c o m e s l o w , t h e g r e e n L E D o f t h e; HANDLING PRECAUTIONS; doing so may result in unit failure.; Channel selector switch; Green LED
- Page 3 – CHANNEL NUMBER SETTING; Note; OPERATIONAL HINTS; Pad switch
- Page 4 – • Accessories; License requirement; Wireless Tuners
Thank you for purchasing TOA's UHF Wireless Microphone.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
WM-5270
UHF WIRELESS MICROPHONE
INSTRUCTION MANUAL
• To prevent the electromagnetic wave from badly influencing medical equipment, make sure to switch off the
unit's power when placing it in close proximity to the medical equipment.
• When the unit is not in use for 10 days or more, be sure to take the battery out of the unit because battery
leakage may cause personal injury or contamination of environment.
• Make sure to observe the following handling precautions so that a fire or personal injury does not result from
leakage or explosion of the battery.
· Do not short, disassemble, heat nor put the battery into a fire.
· Do not solder a battery directly.
· Be sure to use the specified type of battery.
· Note correct polarity (positive and negative orientation) when inserting a battery in the unit.
· Avoid locations exposed to the direct sunlight, high temperature and high humidity when storing batteries.
• Attention should be drawn to the environmental aspects of battery disposal.
CAUTION TO USER: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
1. SAFETY PRECAUTIONS
• Be sure to read the instructions in this section carefully before use.
• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
• We also recommend you keep this instruction manual handy for future reference.
2. GENERAL DESCRIPTION
The TOA's WM-5270 Wireless Microphone employs a dynamic microphone with high input handing capacity,
and is suitable for vocal use.
3. FEATURES
• One frequency can be selected from 64 frequencies (16 channels x 4 banks) of 692 – 865 MHz.
• An optimized PLL-synthesizer minimizes the oscillation frequency drift resulting from the ambient
temperature or voltage fluctuation.
• The maximum input sound pressure can be set in the range of 130 dB SPL to 142 dB SPL by a PAD switch,
permitting adaptation to wide range of input sound pressure.
• Power/Battery lamps indicate battery consumption to prevent the unit from malfunctioning when the battery
level remarkably decreases.
• Operates on a single AA battery.
• Employs a built-in antenna.
• The state of battery consumption can be displayed on the tuner's indicator when the unit is used in
conjunction with the optional WT-5800, WT-5805 or WT-5810 Wireless Tuner.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
6. REPLACING THE BATTERY Step 1. Hold down the power switch for one second or more to turn off thepower. Step 2. H o l d t h e m i c r o p h o n e b o d y a n d r o t a t e t h e m i c r o p h o n e g r i pcounterclockwise to remove it. Step 3. Insert an AA battery according to (+) and (–) indicatio...
3 7. CHANNEL NUMBER SETTING Step 1. Switch off the power. Rotate the microphone gripcounterclockwise to remove it. Step 2. Using the screwdriver housed in the microphonebody, set the Channel selector switch pointer tothe desired channel number. Step 3. Replace the microphone grip. Note Make sure tha...
133-07-241-50 12. SPECIFICATIONS Microphone Element Dynamic microphone unit, cardioid pattern Modulation Frequency modulation Frequency Range 692 – 865 MHz, UHF Selectable Channel 64 frequencies (the number of channels may differ from country to country.) RF Carrier Power Less than 50 mW Tone Freque...
