TDK iQA Series - Manual
TDK iQA Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Amps; Product Offering
- Page 3 – PIN
- Page 4 – Input Characteristics:
- Page 5 – Advance Data Sheet: DualetaTM iQA Series – Dual Quarter Brick; Characteristic
- Page 6 – Typical Efficiency vs. Input Voltage at Ta=25
- Page 7 – Typical Input Current vs. Input Voltage Characteristics.
- Page 8 – Trim up – tracking trim option; Rdown is connected between Trim and Vout2.
- Page 12 – Trim up – independent trim; Rup1 is connected between Trim1 and Vout1.; Rup; Trim down – independent trim; Rdown1 is connected between Trim1 and RTN.
- Page 14 – Test Setup; AIRFLOW; ) and airflow rate as shown in the
- Page 15 – For applications with; Operating Information
- Page 16 – Output Voltage Adjustment; Circuit to decrease output voltage; Circuit to increase output voltage
- Page 17 – Optional Tracking Trim; Innoveta power
- Page 18 – Reliability
- Page 19 – hazardous voltages do not appear at the module output.; is a trademark or registered trademark of TDK Corporation.
Data Sheet: Dualeta™ iQA Series – Dual Quarter Brick
©2001-2006 Innoveta™ Technologies, Inc.
iQAFullDatasheet080505 2.doc 8/3/2006
℡
(877) 498-0099
1/19
Dualeta™ iQA Series DC/DC Power Modules
48V Input, 15A Output
Dual Output Quarter Brick
The Dualeta™ Family is a
75W
family of highly versatile,
independently regulated
,
dual output quarter brick
power modules with output voltage tracking. Its output
current loading scheme is fully flexible:
0 to 15A
can be
drawn from either output with no minimum load
requirements. An
ultra wide range independent output
trim
allows the realization of dual output voltage
combinations between 1.5 and 5.5V. The superior
versatility of the Dualeta™ family substantially reduces
the quantity of distinct part numbers in the end user part
portfolio, lowering cost of ownership.
Features
•
Standard Dual Quarter Brick format
•
A single module which can support
all your dual voltage requirements
between 1.5V and 5.5V
•
Two output trim options:
o
Standard Dual Trim
– wide range
independent adjustment of either
output, using two trim pins
o
Optional Single Tracking Trim –
adjust both outputs together by 10%
according to industry standard
resistor tables
•
Independently regulated, tight
tolerance outputs
•
Flexible loading: 0-15A from either
output, 15A total load
•
High efficiency – up to 89%
•
Industry-leading output power: 75W
•
Basic insulation – 1500 Vdc
•
Full, auto-recovery protection:
o
Input under and over voltage
o
Output
over
voltage
o
Current
limit
o
Short
circuit
o
Thermal
limit
•
Monotonic, tracking start-up
•
Starts with pre-biased outputs
•
High reliability open frame, surface
mount construction
•
Baseplate for improved thermal
management
•
UL 60950 (US and Canada), VDE 0805,
CB scheme (IEC950)
•
Patented
Technology
Options
•
Optional Single Tracking Trim – using
industry standard resistor tables
•
Remote on/off (negative logic)
•
Short Thru-hole pins 2.79 mm (0.110”)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Advance Data Sheet: Dualeta™ iQA Series – Dual Quarter Brick ©2001-2005 TDK Innoveta Inc. iQAFullDatasheet080505 2.doc 8/3/2006 ℡ (877) 498-0099 2/19 Ordering information Product Identifier Package Size Platform Input Voltage Output Current/ Power Output Units Main Output Voltage # of Outputs Safety...
Advance Data Sheet: Dualeta™ iQA Series – Dual Quarter Brick ©2001-2005 TDK Innoveta Inc. iQAFullDatasheet080505 2.doc 8/3/2006 ℡ (877) 498-0099 3/19 Mechanical Specification Dimensions are in mm [in]. Unless otherwise specified tolerances are: x.x ± 0.5 [0.02], x.xx and x.xxx ± 0.25 [0.010]. Recomm...
Advance Data Sheet: Dualeta™ iQA Series – Dual Quarter Brick ©2002-2005 TDK Innoveta Inc. iQAFullDatasheet080505 2.doc 8/3/2006 ℡ (877) 498-0099 4/19 Absolute Maximum Ratings: Stress in excess of Absolute Maximum Ratings may cause permanent damage to the device. * Engineering estimate. Input Charact...
