Page 2 - TO REDUCE THE RISK OF ELEC-; CAUTION; The important note is located on the rear of the cabinet.; IMPORTANT SAFEGUARDS
2 EN CAUTION: TO REDUCE THE RISK OF ELEC- TRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE. REFERSERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGER-OUS VOLTAGE CONSTITUTING A RISK OFELECTRIC SHOCK IS PRESEN...
Page 3 - PRECAUTIONS; Note to CATV system installer:
3 EN IMPOR T ANT SAFEGU ARDS / PRECA UTIONS PRECAUTIONS • Place your TV in a room with adequate ventilation.• Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.• Do not place your TV on soft surfaces, such as rugs or blankets.• Leave enough room for air to ...
Page 4 - • Owner’s Manual
4 EN FEATURES SUPPLIED ACCESSORIES • Owner’s Manual (1EMN21951) • Remote control unit (NF006UD) • Batteries (“AA” x 2) • If you need to replace these accessories, please refer to the PART NO. with the illustrations and call our help line mentioned on the front page. • Depending on your antenna syste...
Page 5 - ONTENTS; : Settings only for the analog mode; SYMBOLS USED IN THIS MANUAL
5 EN SUPPLIED A CCESSORIES / FEA TURES / CONTENTS C ONTENTS IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 7 - INSTALLING THE BATTERIES; Reversed batteries may cause damage to the device.; FUNCTIONS; from underneath; AUDIO OUT jacks
7 EN INSTALLING THE BATTERIES Install two AA batteries (supplied) matching the polarity indicated inside battery compartment of the remotecontrol. [BATTERY PRECAUTIONS] • Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device...
Page 8 - ) When connecting TV to antenna; Cables not included; MAKE SURE YOU HAVE AN ANTENNA.
P REPARATION FOR USE 8 EN CONNECTION This section describes how to connect this TV to reception and other sources. [ANTENNA CABLE CONNECTION] 1) When connecting TV to antenna Connect the RF cable or antenna cable on your home outlet to the ANT. IN jack of this TV. 2) When connecting TV to RF/Incomin...
Page 9 - EXTERNAL CONNECTION; (commercially available) for connection as illustrated below.
9 EN PREP ARA TION FOR USE EXTERNAL CONNECTION [HDMI CONNECTION] 1) This is the best method to connect this TV to video devices with the HDMI output jack, such as DVD play- er with HDMI output jack, etc. It can minimize the deterioration of image quality. Use the HDMI cable (commercially available) ...
Page 10 - To AUDIO input jacks
10 EN [COMPONENT CONNECTION] 1) This is a better method to connect this TV to video devices with the Component output jack, such as a DVD player, etc. Use the Component cable (commercially available) for connection.If you connect component output jacks to COMPONENT1 input jack, connect an audio cabl...
Page 12 - INITIAL SETTINGS; • LANGUAGE SELECTION; NITIAL SETTINGS; Before starting initial setup you must connect antenna.
12 EN INITIAL SETTINGS This section describes the initial settings when youfirst turn on the power after purchase. The initialsetting items are shown below. • LANGUAGE SELECTION You can select the menu language displayed on the screen among English, Spanish and French. • AUTOSCAN (TV/DTV) (Select “A...
Page 13 - AUTOSCAN; HANNEL SETTINGS
13 EN INITIAL SETTINGS / CHANNEL SETTINGS 3 For TV channels, using [ K / L ] , select “Air”. For CATV channels, select “Cable”. • Press [ENTER] . Scanning and memorizing the channels auto-matically starts. • When the scanning and memorizing are com- pleted, the lowest memorized channel in thebroadca...
Page 14 - CHANNEL LIST
14 EN CHANNEL LIST The Channel List function lets you skip the unnec-essary channels from the Channel registration list. 1 Display the setup screen. • Press [SETUP] . The following setup screen is displayed. 2 Select “CHANNEL” and press [ENTER] to con- firm. • Using [ K / L ] , select “Channel List”...
Page 15 - CHANNEL SETTINGS; MANUAL REGISTER; Channel number
15 EN CHANNEL SETTINGS MANUAL REGISTER You can register the remainder of channels thatwere not scanned by the Autoscan function due tothe bad reception status at the initial setting. 1 Display the setup screen. • Press [SETUP] . The following setup screen is displayed. 2 Select “CHANNEL” and press [...
Page 16 - ANTENNA CONFIRMATION; • If the channel is set to external input, you can-
16 EN ANTENNA CONFIRMATION You can verify the signal strength of each channelto get a clearer picture. 1 Display the setup screen. • Press [SETUP] . The following setup screen is displayed. 2 Select “CHANNEL” and press [ENTER] to con- firm. • Using [ K / L ] , select “Antenna”. • Press [ENTER] . • U...
Page 17 - LANGUAGE SELECTION
17 EN CHANNEL SETTINGS LANGUAGE SELECTION You can choose your on screen language from oneof the following English, Spanish or French. 1 Display the setup screen. • Press [SETUP] . The following setup screen is displayed. 2 Select “LANGUAGE” and press [ENTER] to con- firm. • Using [ K / L ] , select ...
Page 18 - CHANNEL SELECTION; VOLUME ADJUSTMENT; on your remote control; ATSC; ATCHING TV
18 EN CHANNEL SELECTION You can select the channel by using either [CH K / L ] or Channel number buttons. How to select the channel in each way is shown below. 1 Using [CH K / L ] , or Channel number buttons and pressing [ENTER] . • Using [CH K / L ] , change the channel. • Same operation is availab...
Page 19 - STILL MODE
19 WA T CHING TV EN STILL MODE You can freeze the image shown on the screen. 1 Pause the image. • When you press [STILL] , the image shown on the screen is paused. • The audio is not paused and keeps on reading out. • If the digital signal is gone or protected, the image will remain paused and the a...
Page 20 - SWITCHING EXTERNAL INPUT; Video; • When you press
20 EN SWITCHING EXTERNAL INPUT When you connect external devices including aDVD player and home audio system, you can easilyswitch the input mode with the remote control. 1 Switch the input mode. • When you press [INPUT SELECT] or [CH K / L ] on the remote control, the input mode will be switched as...
Page 21 - CHANGING THE SCREEN DISPLAY MODE
21 EN WA T CHING TV CHANGING THE SCREEN DISPLAY MODE Each 4 types of display mode can be selected in thescreen mode in both 4:3 and 16:9 TV aspect ratio. You can select your favorite screen mode and enjoythe program. 1 Switch the Screen mode. • Every time you press [SCREEN MODE] , the TV aspect rati...
Page 22 - SCREEN INFORMATION
22 EN SCREEN INFORMATION You can display the currently selected channelnumber or other information such as the audiomode on the screen for checking. In the analog mode, the currently selected channelnumber and the audio mode are displayed. 1 Display the channel number and the audiomode. • Press [INF...
Page 23 - PTIONAL SETTINGS; SLEEP TIMER
23 EN WA TCHING TV / OPTIONAL SETTINGS O PTIONAL SETTINGS SETUP SCREEN This section describes the overview of the setupscreen displayed when you press [SETUP] . For more details, see the reference page for eachitem. The setup screen consists of the function settingitems below. • To exit settings. • ...
Page 24 - PICTURE ADJUSTMENT
24 EN PICTURE ADJUSTMENT You can enjoy your favorite picture mode selectingfrom five picture default settings that will adjust col-ors to enhance your viewing experience. Also, thebrightness, contrast, color, tint, sharpness colortemperature, and energy saving setting can bechanged. 1 Display the se...
Page 25 - OPTIONAL SETTINGS; CLOSED CAPTION
25 EN OPTIONAL SETTINGS CLOSED CAPTION You can view specially labeled (cc) TV programs,movies, news and prerecorded tapes, etc. witheither a dialogue caption or text display added tothe program. You can also change the font size and the font styleby selecting options in the “Conventional CC”. 1 Disp...
Page 26 - DTV CLOSED CAPTION; Service 1 to Service 6:; CLOSED CAPTION STYLE
26 EN DTV CLOSED CAPTION Apart from closed captions, DTV has its own closedcaptions called DTV CC. Use this menu to changethe settings for DTV CC. 1 Display the setup screen. • Press [SETUP] . The following setup screen is displayed. 2 Select “DETAIL” and press [ENTER] to confirm. • Using [ K / L ] ...
Page 27 - • When “User Setting” is set to “On”, you can set; A B C D E F G H I J K L; Picture display; To exit the setup, press
27 EN OPTIONAL SETTINGS 6 Set each item. • When “User Setting” is set to “On”, you can set the following items. • CC style set by “User Setting” will be displayed.• Using [ K / L ] , select the item you want to set. • You can switch the setting for each item with [ K / L ] . • The setting descriptio...
Page 28 - A MPAA Rating
28 EN V-CHIP You can set the viewing limitations to prevent yourchildren from watching inappropriate programsincluding disagreeable expression and description.The viewing limitations set for the program can bereleased by entering the password. 1 Display the setup screen. • Press [SETUP] . The follow...
Page 29 - B TV Rating
29 EN OPTIONAL SETTINGS 5 Set “MPAA Rating”.• Using the [ K / L ] , select the rating. • Press [ENTER] and set to “View” or “Block”. 6 To exit the setup, press [SETUP] . 4 Display the “TV Rating” screen. • Using [ K / L ] , select “TV Rating”. • Press [ENTER] . V-Chip V-Chip Select View/Block Back B...
Page 30 - C New Password
30 EN 4 Display the “New Password” screen. • Using [ K / L ] , select “New Password”. • Press [ENTER] . 5 Change the password. • Use Channel number buttons on the remote control and enter the NEW 4-digit password. • Enter password again in “Confirm password” space. 6 To exit the setup, press [SETUP]...
Page 31 - HDMI AUDIO
31 EN OPTIONAL SETTINGS HDMI AUDIO Set the method of sound input for HDMI jack. 1 Display the setup screen. • Press [SETUP] . The following setup screen is displayed. 2 Select “DETAIL” and press [ENTER] to confirm. • Using [ K / L ] , select “HDMI Audio” and press [ENTER] to confirm. 3 Switch the HD...
Page 32 - TROUBLESHOOTING GUIDE; Symptom; ISCELLANEOUS
32 EN TROUBLESHOOTING GUIDE Before calling for service, check the following chart again. Symptom Remedy No power No picture or sound No color Sound OK, picture poor Picture distorted Weak picture Lines or streaks in picture Picture blurred Ghosts in picture Bars on screen • Be sure the Power cord is...
Page 33 - Problems on Closed Caption; MISCELLANEOUS
33 EN Symptom Remedy Picture rolls vertically Different color marks on screen Poor reception on some channels Picture OK, sound poor No reception of digital signals The entered channel number changesautomatically Remote control doesn’t work Problems on Closed Caption Misspelled captions are displaye...
Page 34 - CABINET CLEANING; • Wipe the front panel and other exterior surfaces of; LCD CLEANING; MAINTENANCE
34 EN ATSC Acronym that stands for AdvancedTelevision Systems Committee andthe name of the digital broadcastingstandards. Aspect ratio The width of a TV screen relativeto its height. Conventional TVs are4:3 (in other words, the screen isalmost square); widescreen mod-els are 16:9 (the screen is almo...
Page 35 - PECIFICATIONS; GENERAL SPECIFICATIONS; Terminals; Mini DIN 4-pin jack x 2; Coaxial digital audio output:; One pin jack, 500mVpp; Stereo Sound System Speaker; ELECTRICAL SPECIFICATION; MISCELLANEOUS / SPECIFICA
35 EN S PECIFICATIONS GENERAL SPECIFICATIONS Television system: ATSCNTSC-MTV Standard Closed Caption System: §15.119/FCC (Analog CC)§15.122/FCC (Digital CC) Channel coverage (ATSC/NTSC) VHF: 2 ~ 13 UHF: 14 ~ 69 CATV: 2 ~ 13, A ~ W,W+1 ~ W+94,A-5 ~ A-1, 5A Tuning System: Channel frequency synthesized...
Page 36 - Printed in China; LIMITS AND EXCLUSIONS:; FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT; WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:; please contact us at :; FUNAI CORPORATION
Printed in China 1EMN21951 L4404UE ★★★★★ FUNAI CORPORATION LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanshipas follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one ...
