Page 2 - IMPORTANT SAFEGUARDS; The caution marking is located on the rear of the cabinet.; CAUTION
1. Read instructions - All the safety and operating instruc- tions should be read before the appliance is operated. 2. Retain Instructions - The safety and operating instruc- tions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instruct...
Page 4 - PRECAUTIONS
- 4 - EN The serial number of this product may be found on the back of the unit. No other unit has the same serialnumber as yours. You should record the number and other vital information here and retain this book as a per-manent record of your purchase to aid identification in case of theft. Serial...
Page 5 - QUICK; SYMBOLS USED IN THIS MANUAL; SUPPLIED ACCESSORIES
- 5 - EN AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE LOCATION For safe operation and satisfactory performance ofyour unit, keep the following in mind when selectinga place for its installation: • Shield it from direct sunlight and keep it away fromsources of intense heat. • Avoid dusty or humid p...
Page 6 - TABLE OF CONTENTS
- 6 - EN TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . .4 LOCATION . . . . . . . . . . . . . . . . . . .5 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE .5 WARNING . . . . . . . . . . . . . . . . . . . .5 SYMBOLS USED IN THIS MANUAL . . . . . . . . ....
Page 7 - FEATURES; TV Mode; DVD Mode
- 7 - EN • Infrared remote control • Trilingual on screen TV setup display selectablein English, Spanish or French • 181 channel capability PLL frequency synthesiz-er tuner with direct station call (A converter may be necessary to view scrambled cable channels.) • Closed Caption Decoder – You may vi...
Page 8 - OPERATING CONTROLS AND FUNCTIONS
- 8 - EN OPERATING CONTROLS AND FUNCTIONS - REMOTE CONTROL - [Fig. 2] - FRONT PANEL - [Fig.1] VIDEO L–AUDIO–R VOLUME CHANNEL STOP SKIP SKIP PAUSE HEADPHONE – S E A R C H – OPEN/ CLOSE PLAY POWER 7 4 2 8 9 10 9 11 12 13 6 5 3 1 24 25 15 16 9 11 17 18 20 21 23 22 19 10 26 27 28 31 34 5 6 1235 33 32 8 ...
Page 10 - Note to CATV system installer:; PREPARATION FOR USE; ANTENNA/CABLE CONNECTIONS; Cable; Rear of the unit
- 10 - EN NOTE: Before plugging the antenna into the ANT. jack of the unit, check that the pin isnot bent. If it is bent, straighten the pin as illustrated, then plug the pin into theANT. jack of the unit. Bent pin Cable Plug (Needs to be straightened) (Straight pin) Note to CATV system installer: T...
Page 11 - To the Audio output jacks; AUX
- 11 - EN CONNECTING TO FRONT A/V INPUT JACKS When you watch a program recorded on another source (VCR or video camera), use theAUDIO/VIDEO input jacks on the front of the unit.Connect the Audio/Video output jacks of another source to the AUDIO L/R and VIDEOjacks of this unit. Then press [SELECT] or...
Page 12 - CONNECTING TO A DOLBY DIGITAL DECODER (for DVD); )Open the battery compartment cover by pressing
- 12 - EN COAXIAL ANT. Front speaker (left) Center speaker Front speaker (right) Surround speaker (left) Surround speaker (right) Subwoofer To COAXIAL jack(Only DVD AUDIO OUT) To Coaxial digital Audio input jack Dolby Digital decoder Audio Coaxial digital cable(commercially available) [Fig. 7] CONNE...
Page 13 - TV SECTION; TV OPERATION AND SETTINGS; DEGAUSSING; WATCHING A TV PROGRAM; TO WATCH EXTERNAL INPUT; TV; PICTURE CONTROL; TV
- 13 - EN TV SECTION TV OPERATION AND SETTINGS DEGAUSSING This television has a degaussing circuit that will clearup color errors on the TV screen that are caused byany excess magnetism which happens to get too closeto the TV. This circuit is designed to operate oncewhen the set is first plugged in....
Page 14 - CLOSED CAPTION SYSTEM; SLEEP TIMER; Call up the Sleep Timer Setting; TO CANCEL THE SLEEP TIMER
- 14 - EN • If the unit displays a black box onthe TV screen, this means that theunit is set to the TEXT mode. Toclear screen, select [CAPTION1],[CAPTION2] or [OFF]. Make sure ... • The unit must be turned on. 1 Select “CAPTION” Hit [SETUP] . Press [ K K / L L ] to point to “CAPTION”. 2 Select your ...
Page 15 - CHANNEL SET UP; AUTO CHANNEL PROGRAMMING; ADDING/DELETING CHANNELS; the Number
- 15 - EN CHANNEL SET UP Make sure ... • The unit must be turned on. AUTO CHANNEL PROGRAMMING As the initial setting, this unit has memorized allchannels, including the ones not available in yourarea. This feature automatically puts only availablechannels into the memory. 1 Select “CHANNEL SET UP” H...
Page 16 - the Number buttons; TV RATING SET UP; Selection; Step
- 16 - EN This feature enables parents to prevent their childrenfrom watching inappropriate material on TV. Whenyou try to access a program which is blocked,“PROTECTED PROGRAM by ...” message appearson the TV screen. V-CHIP SET UP Make sure ... • The unit must be turned on. 1 Select “V-CHIP SET UP” ...
Page 17 - CHANGE ACCESS CODE; MPAA RATING SET UP; MENU LANGUAGE
- 17 - EN CHANGE ACCESS CODE Follow steps 1 to 3 in the “V-CHIP SET UP” sec- tion on page 16. 4 Enter New code Press the Number buttons to enter your desired access code in the“NEW CODE” space, then enterthe same code in the “CONFIRMCODE” space. When completed,the menu will return to “V-CHIP SET UP”...
Page 18 - CABLE CHANNEL DESIGNATIONS
- 18 - EN CABLE CHANNEL DESIGNATIONS If you subscribe to cable TV, the channels are displayed as 1-125. Cable companies often designate channelswith letters or letter-number combinations. Please check with your local cable company. The following is achart of common cable channel designations. TV Dis...
Page 19 - DVD SECTION; ABOUT THE DISCS; recorder or special properties of discs.; On the following disc, the sound MAY NOT be heard.; Super Audio CD; PLAYABLE DISCS
- 19 - EN DVD SECTION ABOUT THE DISCS If you cannot play back a disc which bears one of the marks above, check the following notes. *1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back. *2: Certain DVD-Video discs do not operate as ...
Page 20 - PLAYING A DISC; BASIC PLAYBACK; Getting started; ] to open disc loading; CD; GENERAL FEATURES; the appropriate; TITLE MENU; ] to select an item and
- 20 - EN PLAYING A DISC BASIC PLAYBACK Getting started ¡ Turn on the power of amplifier and any other com-ponents, if necessary. 1 Hit [POWER]. ¡ The power will turn on. 2 Hit [OPEN/CLOSE A ] to open disc loading tray. 3 Place the chosen disc in the tray, with thelabel facing up. CD DVD-V 4 Hit [PL...
Page 22 - SEARCH FUNCTION; TRACK SEARCH; Using the Number buttons; TITLE / CHAPTER SEARCH; MARKER SETUP SCREEN
- 22 - EN SEARCH FUNCTION TRACK SEARCH There are three ways to begin playback on an AudioCD at a specific track. Using the Number buttons 1 Press the Number buttons to enter thedesired track number. ¡ Playback will start at the selected track. ¡ For single digit tracks (1-9), press a single number(e...
Page 23 - SPECIAL PLAYBACK FUNCTION; REPEAT; REPEAT TITLE / CHAPTER; REPEAT TRACK; Repeat step; RANDOM PLAYBACK
- 23 - EN SPECIAL PLAYBACK FUNCTION REPEAT REPEAT TITLE / CHAPTER To activate the repeat function, hit [REPEAT]during playback. ¡ The repeat mode changes as described below everytime you hit the button. DVD-V REPEAT is available only during playback. CHAPTER TITLE OFF ( current chapter repeat) ( cur...
Page 24 - CHANGING THE SETTINGS; AUDIO LANGUAGE; SUBTITLE LANGUAGE
- 24 - EN CHANGING THE SETTINGS AUDIO LANGUAGE The unit allows you to select a language during DVDdisc (if multi languages are available) playback. 1 Hit [AUDIO] during playback. 2 Hit [AUDIO] repeatedly to select yourdesired language. NOTE: ¡ Hitting [AUDIO] may not work on some DVDs with multiple ...
Page 25 - You can also exit the menu by hitting; VIRTUAL SURROUND; THE ON-SCREEN INFORMATION; For Audio CDs; DOM) will be displayed at step
- 25 - EN You can enjoy surround-sound effect over two speak-ers on this unit. 1 Hit [MODE] twice (CD: once) during play-back. 2 Hit [ENTER] to set it “1” (Natural effect), “2”(Emphasized effect) or “OFF”. 3 Hit [MODE] to exit. ¡ You can also exit the menu by hitting [RETURN] . NOTE: (for CD play on...
Page 26 - CHANGING THE DVD SET UP ITEMS; CUSTOM MENU; Select the desired item.; LANGUAGE SETTING; ] to select the desired item then
- 26 - EN CHANGING THE DVD SET UP ITEMS CUSTOM MENU You can change the DVD player’s settings. 1 Hit [SETUP] twice in the stop mode so thatthe DVD SETUP menu appears. ¡ Hit [ L ] to select “CUSTOM” then hit [ENTER] . NOTE: ¡ If the menu does not appear, hit [PLAY O ] first, then hit [STOP C ] . Make ...
Page 27 - AUDIO SETTING; Follow steps; When playing disc with copyright Protection; LANGUAGE SETTING FOR THE ON-SCREEN MENUS; DISPLAY SETTING; ] to select the below items then; QUICK MENU
- 27 - EN AUDIO SETTING Choose the appropriate Audio settings for your equip-ment as it only affects during the playback of DVDdiscs. Follow steps 1 to 2 in the “CUSTOM MENU” section on page 26. 3 Press [ K K / L L ] to select the below items then hit [ENTER]. DRC (Dynamic RangeControl): ¡ To compre...
Page 28 - CONTROL LEVELS; PARENTAL CONTROL; PARENTAL LEVEL; IF YOU FORGET THE PASSWORD; menu language; OTHER SETTINGS; INITIALIZE
- 28 - EN CONTROL LEVELS ¡ ALL All parental lock is cancelled. ¡ Level 8 DVD software of any grade (adult/general/children)can be played back. ¡ Levels 7 to 2 Only DVD software intended for general use andchildren can be played back. ¡ Level 1 Only DVD software intended for children can beplayed bac...
Page 29 - TROUBLESHOOTING GUIDE; PROBLEM
- 29 - EN Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlookedpossibilities. Before arranging for service, check these items. It could save your time and money. TV Mode TROUBLESHOOTING GUIDE PROBLEM CORRECTIVE ACTION No picture or sound • Make sure...
Page 32 - please call our help line mentioned on; , to locate an Authorized Service; IF THE LASER OPTICAL PICKUP UNIT IS DIRTY; DISC HANDLING; Do not use a hard cloth since this will mar the disc.; MAINTENANCE
- 32 - EN CABINET CLEANING • Wipe the front panel and other exterior surfaces ofthe unit with a soft cloth immersed in lukewarmwater and wrung dry. • Never use a solvent or alcohol. Do not spray insec-ticide liquid near the unit. Such chemicals maycause damage and discoloration to the exposed sur-fa...
Page 33 - Designs and specifications are subject to change without notice.; GENERAL SPECIFICATIONS; SPECIFICATIONS
- 33 - EN CRT: 20 inch in-line gun, 90˚ deflection tube Television system: NTSC-M Closed caption system: §15.119/FCCChannel coverage: VHF: 2 ~ 13 UHF: 14 ~ 69 CATV: 2 ~13, A ~ W,W+1 ~ W+84,A-5 ~ A-1, 5A Tuning System: 181 channelfrequency synthesizedtuning system Channel access: Direct access keyboa...
Page 35 - PREPARACIÓN PARA LA UTILIZACIÓN; CONEXIONES DE ANTENA/CABLE; Nota para el instalador de sistemas CATV
- 35 - ES NOTA: Antes de enchufar la antena a la toma ANT. de launidad, compruebe que la clavija no esté doblada.Si esta doblada, póngala derecha como se muestraen la ilustración, y luego conéctela en la tomaANT. de la unidad. 27. Botón A-B Repite la reproducción de una sección seleccionada. 28. Bot...
Page 36 - Consulte la figura 6 de la página 11
- 36 - ES CONEXIÓN A UN DECODIFICADOR DOLBY DIGITAL (para DVD) Si utiliza esta unidad para reproducir un disco DVDen un formato de sonido envolvente Dolby Digital de5,1 canales, la unidad dará salida a un flujo de datosDOLBY DIGITAL desde su toma COAXIAL. Siconecta la unidad a un decodificador Dolby...
Page 37 - IDIOMA DEL MENÚ; los botones numéricos; PARA VER UNA ENTRADA EXTERNA; PARA MIRAR UN
- 37 - ES 1 Seleccione “LANGUAGE” Presione [SETUP] . Presione [ K / L ] para apuntar a “LANGUAGE”. 2 Seleccione “ENGLISH”, “ESPAÑOL” o“FRANÇAIS” Presione [ENTER] repetidamente para seleccionar “ENGLISH” = inglés, “ESPAÑOL” o“FRANÇAIS” = francés. 3 Salga del modo de idioma Presione [SETUP] para salir...
Page 38 - SECCIÓN DE DVD; REPRODUCCIÓN BÁSICA; Para empezar; La alimentación se conectará.; bandeja de carga del disco.; MENÚ DE DISCO; Aparecerá el menú principal de DVD.; REANUDACIÓN; desde el punto donde se paró la reproducción.; Para cancelar la continuación, presione dos veces
- 38 - ES SECCIÓN DE DVD REPRODUCCIÓN BÁSICA Para empezar ¡ Conecte la alimentación del amplificador y otroscomponentes, si es necesario. 1 Presione [POWER]. ¡ La alimentación se conectará. 2 Presione [OPEN/CLOSE A ] para abrir la bandeja de carga del disco. 3 Ponga el disco deseado en la bandeja, c...
Page 39 - MEMO
Page 40 - Printed in Malaysia; FUNAI CORPORATION; LIMITED WARRANTY; LIMITS AND EXCLUSIONS:; PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
Printed in Malaysia 1EMN20326 T9102UC ★★★★★ FUNAI CORPORATION LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for ...
