Page 2 - CAUTION; IMPORTANT SAFEGUARDS
1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed Warnings -All warnings on the appliance and in the operating instructions shoul...
Page 4 - PRECAUTIONS; A NOTE ABOUT RECYCLING
- 4 - EN 1B15 RADIO-TV INTERFERENCE This equipment has been tested and found to com-ply with the limits for a Class B digital device, pur-suant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation.This equipm...
Page 6 - TABLE OF CONTENTS
- 6 - EN 1C29 TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . .2, 3 C PRECAUTIONS . . . . . . . . . . . . . . . .4 LOCATION . . . . . . . . . . . . . . . . . . .5AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE . . .5WARNING . . . . . . . . . . . . . . . . . . . .5SUPPLIED ACCESSORY . . . . . . . .5SYM...
Page 7 - FEATURES
- 7 - EN 1C29 • Hi-Fi system– The Hi-Fi stereo recording system offers you excellent sound quality with a dynamicrange of 80dB, frequency response from 20Hz to20kHz, and 0.005% wow and flutter. • Rotary 4-head Record/Playback System– Four heads ensure excellent picture quality and special effects pl...
Page 8 - DVD Mode
- 8 - EN 1C29 ¡ Dolby Digital sound This player can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder . ¡ Still/fast/slow/step playback Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames. ¡ ...
Page 9 - OPERATING CONTROLS AND FUNCTIONS; Lights on during DVD mode.; DVD buttons
- 9 - EN 1C29 OPERATING CONTROLS AND FUNCTIONS 5. STOP Button [P.37] Stops operation of the disc. (Front Panel)Stops operation of the disc or tape. (Remote control) 6. OPEN/CLOSE Button [DVD P.37] Press to insert discs into or remove them from thetray. 7. Disc loading tray 8. DVD Indicator Lights on...
Page 11 - PREPARATION FOR USE; Automatic Timer Recording.; VHF/UHF SEPARATE ANTENNAS; ANTENNA/CABLE CONNECTION; or
- 11 - EN 1C29 CABLE WITH CONVERTER/DESCRAMBLER BOX OR SATELLITEBOX If your cable service supplies you with a converterbox or if you use a satellite system, you can use thebasic connection shown in the illustration.By using this connection you can also record scram-bled channels. However, channel se...
Page 12 - AUX; Note to CATV system installer:; CONNECTING TO EXTERNAL
- 12 - EN 1C29 TO RECORD A SCRAMBLED/UNSCRAM-BLED CHANNEL 1. Set the TV/DVD/VCR channel selector to the out- put channel of the Cable Converter Box or SatelliteBox. (Ex. CH3) 2.Select the channel to record from your Cable Converter Box or Satellite Box. INSTALLING THE BATTERIES 1)Open the battery co...
Page 14 - CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)
- 14 - EN 1C29 ANT. COAXIAL Front speaker (left) Center speaker Front speaker (right) Surround speaker (left) Surround speaker (right) Subwoofer To DIGITAL AUDIO OUT(PCM/BITSTREAM)COAXIAL jack To COAXIAL DIGITAL AUDIO INPUT jack Dolby Digital decoder [Fig. 7] CONNECTING TO A DOLBY DIGITAL DECODER (f...
Page 15 - SET UP FOR USE; CHANNEL SET UP FOR THE; add the deleted channel into the memory again.)
- 15 - EN 1C29 SET UP FOR USE You can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/DVD/VCR channel selector to the output channel of the cable box or satellite bo...
Page 16 - Select “ENGLISH” or “ESPAÑOL” or
- 16 - EN 1C29 CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on theTV/DVD/VCR. 1 Select “CHANNEL SET UP” Press the SETUP button on theremote control.Press the Arrow button K or L to point to “CHANNEL SET UP”.Then, press the ENTER button. 2 Begin auto preset Press the Arrow butt...
Page 17 - CLOCK SET UP; MANUAL CLOCK SETTING; In the example below, the clock is to be set to:; TO CHANGE CLOCK SETTING
- 17 - EN 1C29 CLOCK SET UP (AUTO / MANUAL) The TV/DVD/VCR clock must be set correctly beforeVCR timer recording is possible. It is suggested that theclock be set manually when first setting up theTV/DVD/VCR. Then, setup auto clock correction whichwill periodically correct the setting if necessary. ...
Page 18 - AUTOMATIC CLOCK SETTING; Select “SETTING CLOCK”
- 18 - EN 1C29 AUTOMATIC CLOCK SETTING Make sure ... • The TV/DVD/VCR is turned on. • Confirm the TV/DVD/VCR is receiving a RF(Radio Frequency) signal from either an antenna orcable system connection using the ANT IN jack onthe rear of the TV/DVD/VCR. NOTE: • If a cable converter box is being used, ...
Page 19 - TV OPERATION; DEGAUSSING; Select the channel number; PICTURE CONTROL; Select “PICTURE CONTROL”
- 19 - EN 1C29 TV OPERATION DEGAUSSING Magnetism from nearby appliances and speakersmight affect the color of the TV picture.If this happens, move this TV/DVD/VCR away fromthe appliance. If the color is still not correct, unplug thepower cord, then plug it in again 30 minutes or so later. TV/VCR WAT...
Page 20 - CLOSED CAPTION SYSTEM; Select “CAPTION”
- 20 - EN 1C29 CLOSED CAPTION SYSTEM You can view specially labeled (cc) TV programs,movies, news, pre-recorded tapes with either a dia-logue caption or text display. CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioningthe dialogues and the contents of n...
Page 21 - V-CHIP SET UP SUB RATINGS
- 21 - EN 1C29 5 Exit the V-Chip setting mode Press the SETUP button on the remote control toexit the screen. V-CHIP SET UP Make sure ... • TV/DVD/VCR is turned on. 1 Select “V-CHIP SET UP” Press the SETUP button on theremote control.Press the Arrow button K or L to select “V-CHIP SET UP”.Then, pres...
Page 22 - MPAA RATING SET UP; Selection; CHANGE ACCESS CODE
- 22 - EN 1C29 CHANGING V-CHIP BLOCKED PRO-GRAMMING Note: To change the rating, the TV must be turned to a station that is not protected. If the (PROTECTED)appears on the screen, please change the channel to astation that is not protected.1)Follow steps [1] and [2].2)Press the Arrow button K or L to...
Page 23 - CHECKING THE SELECTED MTS MODE; MTS RECORDING/MONITOR MODE; SAP
- 23 - EN 1C29 MTS(Multi-Channel Television sound)SYSTEM You can record or listen to a program in MTS stereo. CHECKING THE SELECTED MTS MODE When you play a VHS tape, or receive a broadcaston the TV/DVD/VCR tuner channel you are watching, the status shown below will appear when you pressthe DISPLAY ...
Page 24 - SELECTING THE MTS SYSTEM; TO SELECT HIFI MODE
- 24 - EN 1C29 SELECTING THE MTS SYSTEM Make sure ... • TV/DVD/VCR power must be turned on. TO SELECT HIFI MODE 1 Select “USER’S SET UP” Press the SETUP button on theremote control.Press the Arrow button K or L to point to “USER’S SET UP”. Then,press the ENTER button. 2 Select“VCR AUDIO” Press the A...
Page 25 - VIDEO CASSETTE; This TV/DVD/VCR will operate with any cassette that has the
- 25 - EN 1C29 VIDEO CASSETTE This TV/DVD/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. REMOVING A CASSETTE 1)In the Stop mode, press the EJECT button on the remote control or press the ST...
Page 26 - PLAYBACK; Insert a prerecorded tape
- 26 - EN 1C29 PLAYBACK NORMAL PLAYBACK Make sure ... • TV/DVD/VCR power must be turned on. 1 Insert a prerecorded tape If the erase-protection tab has been removed, theTV/DVD/VCR will start playback automatically. 2 To begin playback Press the PLAY button. 3 To stop playback Press the STOP button w...
Page 27 - SPECIAL PLAYBACK; TO CANCEL THE RENTAL MODE; RENTAL PLAYBACK; BLANK REPEAT; TO CANCEL THE REPEAT PLAY MODE; AUTO REPEAT PLAYBACK
- 27 - EN 1C29 SPECIAL PLAYBACK This function enables you to improve the picturequality when playing back worn cassettes such asrented tapes. 1 Select “USER’S SET UP” Press the SETUP button on theremote control.Press the Arrow button K or L to point to “USER’S SET UP”.Then, press the ENTER button. 2...
Page 28 - SEARCH; WILL NOT; ZERO RETURN; In the example below:
- 28 - EN 1C29 SEARCH Make sure ... • TV/DVD/VCR power must be turned on. • Insert a tape. This function allows you to search easily a beginningpoint that you want to review by rewinding or fastforwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape. 1 Stop a tape at...
Page 29 - Select “INDEX SEARCH”; SPECIAL FEATURES; REAL TIME TAPE COUNTER
- 29 - EN 1C29 INDEX SEARCH This feature provides a method of indexing the start-ing point so that it can be easily returned to in eitherfast forward or rewind mode. • The index mark will be made automatically whenthe REC button is pressed. It will also be marked atthe starting point of Timer record...
Page 30 - RECORDING; Select the channel to be; Select the tape speed; Press the RECORD button.; Stop recording; Press the STOP button when recording is completed.; NORMAL RECORDING
- 30 - EN 1C29 RECORDING Make sure ... • TV/DVD/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape tothe point at which you want to begin recording.) NOTES: • This TV/DVD/VCR will ONLY record and view the same ...
Page 31 - Display; COPYING A VIDEO CASSETTE
- 31 - EN 1C29 This function enables you to set a recording lengthsimply by pressing the REC/OTR button on theTV/DVD/VCR. Make sure ... • TV/DVD/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab inplace. (If necessary, rewind or fast forward the tape tothe point at ...
Page 32 - TIMER; In the example below, the timer is being set to record:; AUTOMATIC TIMER; Select “TIMER PROGRAMMING”; For every day recording :
- 32 - EN 1C29 TIMER You may set the TV/DVD/VCR to start and end arecording while you are away. You can set 8 pro-grams to record on specific days, daily or weeklywithin a 1 year period. In the example below, the timer is being set to record: DATE: July 4th, 2003 SETTING TIME: from 7:30PM to 8:50PMC...
Page 33 - TO CORRECT A PROGRAM; TIMER PROGRAM EXTENSION
- 33 - EN 1C29 To shift the time schedule of an automatic timerrecording.1)Press the POWER button.2)Repeat step [1] on page 32.3)Press the RECORD button and select the desired program using the Arrow button K or L . 4)Press the RECORD button again. Each additional push will shift forward thebegin/en...
Page 34 - TO CHECK THE BEGIN/END TIME; HINTS FOR AUTOMATIC; Select “USER’S SET UP”; SLEEP TIMER; Select “SLEEP TIMER”; TO CANCEL THE SLEEP TIMER
- 34 - EN 1C29 TO CHECK THE BEGIN/END TIME 1)Press the POWER button so that the RECORDING indicator goes off. 2)Press the SETUP button on the remote control.3)Confirm “TIMER PROGRAMMING” is pointed.4)Press the ENTER button. The details of programs appear on the TV screen. 5)Press the SETUP button on...
Page 35 - ON SCREEN DISPLAY; When the Closed Caption mode is OFF:; The On Screen Display disappear after 5 seconds.; OFF mode; CABLE CHANNEL DESIGNATIONS
- 35 - EN 1C29 ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remotecontrol. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows: When the Closed Caption mode is OFF: • Counter mode: Af...
Page 36 - DVD SECTION; ABOUT THE DISCS; DISC TYPES; DVD video; PLAYABLE DISCS; Title 1; Example; Group 1
– 36 – EN 01A11 DVD SECTION ABOUT THE DISCS DISC TYPES The following discs can be played back on thisTV/DVD/VCR. ¡ DVD video ¡ DVD-R/RW* ¡ DVD+R/RW* ¡ Audio CD ¡ CD-R/RW* ¡ MP3* * Depending on the types or the writing method of the medium some discs can not be played. • Some DVD-R/RW, DVD+R/RW, or C...
Page 37 - PLAYING A DISC; BASIC PLAYBACK; Getting started; CD; GENERAL FEATURES; NOTES; TITLE MENU; NOTE
– 37 – EN 01A11 PLAYING A DISC BASIC PLAYBACK Getting started ¡ Turn on the power of amplifier and any other com-ponents, if necessary. 1 Press the POWER button. ¡ The power will turn on. 2 Press the OPEN/CLOSE button to open discloading tray. 3 Place the chosen disc in the tray, with thelabel facin...
Page 38 - Note for using buttons on the main unit:
– 38 – EN 01A11 STEP BY STEP PLAYBACK 1 During playback, press the PAUSE button. ¡ Playback will pause and sound will be muted. 2 The disc goes forward by one frame eachtime the PAUSE button is pressed. 3 To exit step by step playback, press thePLAY button. DVD-V RESUME 1 During playback, press the ...
Page 39 - SEARCH FUNCTION; TRACK SEARCH; Using the Number buttons on the remote control; Press the SEARCH MODE button.; Using the SKIP; H G; TITLE / CHAPTER SEARCH; MARKER SETUP SCREEN; Press the Arrow buttons (
– 39 – EN 01A11 SEARCH FUNCTION TRACK SEARCH There are three ways to begin playback on an AudioCD at a specific Track. Using the Number buttons on the remote control 1 Press the Number buttons to enter thedesired Track number. ¡ Playback will start at the selected track. ¡ For single digit tracks (1...
Page 40 - SPECIAL PLAYBACK FUNCTION; REPEAT; REPEAT TITLE / CHAPTER; REPEAT TRACK; PROGRAM; Press the Arrow button; RANDOM PLAYBACK; In stop mode, press the MODE button twice.
– 40 – EN 01A11 SPECIAL PLAYBACK FUNCTION REPEAT REPEAT TITLE / CHAPTER To activate the repeat function, press theREPEAT button during playback. ¡ The repeat mode changes as described below everytime you press the button. DVD-V REPEAT is available only during playback. CHAPTER TITLE OFF ( current ch...
Page 41 - PLAYING A MP3 DISC; Press the STOP button to stop playback.; MP3 PLAYBACK; Press the PLAY button to start playback.; TRACK SELECTION
– 41 – EN 01A11 PLAYING A MP3 DISC When a CD with MP3 files is in the TV/DVD/VCR,the MP3 menu will appear on the TV screen in stopmode. 1 In stop mode, press the Arrow buttons( K / L ) to select the desired group track. ¡ If a group is selected, pressthe Arrow B or ENTER but- ton to go on to the tra...
Page 42 - CHANGING THE SETTINGS; ) icon appears on the
– 42 – EN 01A11 CHANGING THE SETTINGS AUDIO LANGUAGE The TV/DVD/VCR allows you to select a languageduring DVD disc (if multi language available) play-back. 1 Press the AUDIO button during playback. 2 Press the AUDIO button repeatedly to selectyour desired language. NOTE ¡ Pressing the AUDIO button m...
Page 43 - Press the DISPLAY button again.; THE ON-SCREEN INFORMATION; For audio CDs; For MP3; Press the DISPLAY button during playback.; will be displayed when repeat play has been
– 43 – EN 01A11 For DVD-Vs 1 Press the DISPLAY button during playbackto show current Chapter. ¡ The elapsed and remainingplaying time of the currentchapter will be displayed. 2 Press the DISPLAY button again to showcurrent Title. ¡ The elapsed and remaining playing time of the cur-rent title will be...
Page 44 - CHANGING THE DVD SETUP ITEMS; LANGUAGE SETTING; Language options are not available with some discs.; CUSTOM mode will appear.; Sets the audio language.; TO CHANGE THE ON-SCREEN MENUS
– 44 – EN 01A11 CHANGING THE DVD SETUP ITEMS LANGUAGE SETTING Language options are not available with some discs. 1 Press the SETUP button twice in STOPmode so that the DVD SETUP menuappears. ¡ If the menu does not appear, press the PLAY button,the STOP button, then the SETUP button twice. 2 Press t...
Page 45 - AUDIO SETTINGS; When playing disc with copyright Protection; QUICK; DISPLAY SETTING
– 45 – EN 01A11 AUDIO SETTINGS Choose the appropriate Audio settings for your equip-ment as it only affect during the playback of DVDdiscs. 1 Press the SETUP button twice in STOP modeso that the DVD SETUP menu appears. ¡ If the menu does not appear, press the PLAY button,the STOP button, then the SE...
Page 46 - CONTROL LEVELS; All parental lock is cancelled.; Level 8; PARENTAL CONTROL; PARENTAL LEVEL; ) to select CHANGE at step 5, then press the; IF YOU FORGET THE PASSWORD
– 46 – EN 01A11 – 46 – CONTROL LEVELS ¡ ALL All parental lock is cancelled. ¡ Level 8 DVD software of any grade (adult/general/children)can be played back. ¡ Levels 7 to 2 Only DVD software intended for general use andchildren can be played back. ¡ Level 1 Only DVD software intended for children can...
Page 47 - TROUBLESHOOTING GUIDE; PROBLEM
– 47 – EN 01A11 Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlookedpossibilities. Before arranging for service, check these items. It could save your time and money. TV/VCR Mode TROUBLESHOOTING GUIDE PROBLEM CORRECTIVE ACTION No picture and sound....
Page 50 - DISC HANDLING; MAINTENANCE
– 50 – EN 01A11 EN 01A11 CABINET CLEANING • Wipe the front panel and other exterior surfaces ofthe TV/DVD/VCR with a soft cloth immersed inlukewarm water and wrung dry. • Never use a solvent or alcohol. Do not spray insec-ticide liquid near the TV/DVD/VCR. Such chemi-cals may cause damage and discol...
Page 51 - Designs and specifications are subject to change without notice.; DVD; GENERAL SPECIFICATIONS; SPECIFICATIONS
– 51 – EN 01A11 CRT 19 inch in-line gun, 90 ˚ deflection tube Television system : NTSC-M Closed caption system :§15.119/FCCVideo Heads : Rotary four-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec. Tuner channel TV VHF Low : #2~#6 TV VHF High : #7~#13 TV U...
Page 52 - Printed in Malaysia; FUNAI CORPORATION; LIMITS AND EXCLUSIONS:; or general service procedure, please contact to us:
Printed in Malaysia 0EMN0???? TD861CM ★★★★★ FUNAI CORPORATION LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in CANADA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for o...
