Symbol PL360 - Manual - manualsarea.com

Page 3 - Introduction; Equipment Supplied

Quick Reference Guide 3 Introduction The PhaserLink 360/460 cradle acts as a stand, host communication interface, and charger for the Phaser scanner. For convenience, the cradle can sit on a desktop or be mounted on a wall. The cradle receives data from the scanner via connectors in the bottom of th...

Page 4 - Parts

4 PL360/460 Cradle Parts Scanner Support Tab Charging/Communication Contacts Charging LED Indicator COM 1 COM 2 Power Port Wall-mounting Socket 1 Wall-mountingSocket 2

Page 5 - Connecting to the Host

Quick Reference Guide 5 Connecting to the Host There are three ports on the bottom of the cradle. COM 1 connects to the host computer; COM 2 is used for daisy-chaining multiple cradles together; and, the Power Port supplies power to the cradle. Daisy-Chaining To daisy-chain two or more cradles toget...

Page 6 - Wall Mounting

6 PL360/460 Cradle Wall Mounting Before wall-mounting the cradle, the scanner support tab must be changed from the desk-mount position to the wall-mount position. Desk Mount Wall Mount 1. Lift the scanner support tab out of the top part of the cradle and replace it in the wall-mount position as show...

Page 7 - Inserting Phaser in the Cradle; Recharging the Battery in the Phaser; LED; Off; Slow Blink; Fast Blink; On

Quick Reference Guide 7 Inserting Phaser in the Cradle Place the Phaser scanner in the cradle so that the top of the scanner sits in the larger part of the cradle and the metal contacts on the bottom of the scanner touch the contacts on the cradle. Sending Data to the Host Computer To set up the Pha...

Page 8 - Troubleshooting; Cleaning; Country Approvals; Health and Safety Recommendations; Ergonomic Recommendations

8 PL360/460 Cradle Troubleshooting If the cradle does not work after following the operating instructions in this guide: • check the system power. • check for loose cable connections. • ensure the scanner is sitting properly in the cradle. Cleaning Wipe the cradle periodically with a lens tissue or ...

Page 9 - Vehicle or Forklift Installation

Quick Reference Guide 9 - Reduce or eliminate vibration. - Reduce or eliminate direct pressure. - Provide adjustable workstations. - Provide adequate clearance. - Provide a suitable working environment. - Improve work procedures. Vehicle or Forklift Installation Position your device within easy reac...

Page 10 - Power Supply

10 PL360/460 Cradle In accordance with Clause 5, IEC 825 and EN60825, the following information is provided to the user: ENGLISH HEBREW CLASS 1 CLASS 1 LASER PRODUCT CLASS 2 LASER LIGHTDO NOT STARE INTO BEAMCLASS 2 LASER PRODUCT DANISH / DANSK ITALIAN / ITALIANO KLASSE 1 KLASSE 1 LASERPRODUKT CLASSE...

Page 11 - Symbol Rechargeable Batteries; Radio Frequency Interference Requirements-FCC; Radio Frequency Interference Requirements - Canada

Quick Reference Guide 11 indicate the recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal. Symbol Rechargeable Batteries Symbol rechargeable battery packs are designed and constructed to the highest standards withi...

Page 12 - Statement of Compliance; Waste Electrical and Electronic Equipment (WEEE)

12 PL360/460 Cradle Marking and European Economic Area (EEA) Statement of Compliance Symbol Technologies, Inc., hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A Declaration of Conformity may be obtained from ht...

Page 14 - Wall Mounting Template

14 PL360/460 Cradle Wall Mounting Template CenterLine of Cradle Wall Mounting Socket 2 Wall Mounting Socket 1 1 5/16” 11/16” Use 1/8” drill bit for the screw holes. 3 1/2”

Page 16 - Service Information

Before you use the unit, it must be configured to operate in your facility’s network and run your applications. If you have a problem running your unit or using your equipment, contact your facility’s Technical or Systems Support. If there is a problem with the equipment, they will contact the Symbo...

Symbol PL360 - Manual

Table of Contents:

Summary

Other Symbol Models