SVAT WSE300 - Manual
SVAT WSE300 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – VENTILATION
- Page 4 – GENERAL SETUP; BATTERY INSTALL
- Page 5 – TROUBLESHOOTING; SPECIFICATIONS
- Page 6 – PRODUCT WARRANTY; CAUTION
- Page 7 – LES PRÉCAUTIONS IMPORTANTES DE SÛRETÉ
- Page 9 – INSTALLATION; LA BATTERIE INSTALLENT
- Page 10 – CARACTÉRISTIQUES; Lancement De Point; TEMPÉRATURE DE FONCTIONNEMENT
- Page 11 – GARANTIE DE PRODUIT; ATTENTION
- Page 12 – Si vous exigez plus d'information sur ce produit ou ces
WSE300
WSE300
WIRELESS COLOUR CMOS OUTDOOR CAMERA with 2.5" LCD SCREEN
Caméra Sans Fil pour l'Extérieur et Moniteur avec Écran LCD de 2.5"
User's Manual
Manuel de l'utilisateur
*This product transmits its signal using public air waves.
The signal may be intercepted without your consent by a third party.
*Ce produit transmet son signal utilisant des vagues d'air publiques. Le signal
peut être intercepté sans votre consentement par un tiers.
www.svat.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
w w w . s v a t . c o m IMPORTANT SAFETY PRECAUTIONS PLEASE READ BEFORE INSTALLING Congratulations on your purchase of the 2.4GHz Wireless Color LCD Monitoring System. Please read these safety and operating instructions carefully before installing and using this system. • Keep the camera, monitor an...
w w w . s v a t . c o m GENERAL SETUP 1. Connect the power jack of adapter (DC 8V) to camera. 2. Turn on the monitor. Make sure that the active channel on the monitor is the same that is on the camera. Wait for the LCD screen to display images. 3. Adjust the volume control to preferred setting. BATT...
w w w . s v a t . c o m You should... 1. Check that the power cord(s) is properly connected. 2. Check that the monitor is turned ON. 3. Wrong AC/DC adapter used. Check that the adapter labeled OUTPUT: 8V DC is connected to the camera, and adapter labeled OUTPUT: 5V DC is connected to the monitor. 1....
