SUNEX TOOLS 5002A - User Manual

5001A and 5002A:

Parts Breakdown and Operating Manual

rev. 3/13/17

Operating Instructions • Warning Information • Parts Break down

5001A

6" BENCH GRINDER

WITH LAMP

5002A

8" BENCH GRINDER

WITH LAMP

SPECIFICATIONS 5001A

5002A

Size of Grinding Wheel . . . . 6" x 3/4" x 1/2" . . . 8" x 1" x 5/8"
Speed (at 60 HZ) . . . . . . . . . 3400 RPM . . . . . . . . 3400 RPM
Power . . . . . . . . . . . . . . . . . . 1/2 HP . . . . . . . . . . . 3/4 HP
Weight (G .W .) . . . . . . . . . . . 28 LBS . . . . . . . . . . . 33 LBS .

© Copyright 2017, Sunex Tools

®

RPM

RPM

RPM

ALWAYS READ THIS MANUAL BEFORE

OPERATING THIS TOOL

ALWAYS WEAR EYE PROTECTION WHEN

OPERATING THIS TOOL (USERS AND

BYSTANDERS)

ALWAYS WEAR HEARING PROTECTION

WHEN OPERATING THIS TOOL (USERS

AND BYSTANDERS)

ALWAYS WEAR BREATHING APPARATUS

WHEN OPERATING THIS TOOL (USERS

AND BYSTANDERS)

AVOID PROLONGED EXPOSURE

TO VIBRATION

RATED RPM OF ACCESSORY USED MUST

EXCEED THE MAXIMUM TOOL RPM SHOWN

WARNING

Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:

• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.

WARNING