Page 2 - IMPORTANT SAFETY INSTRUCTIONS; TV must be plugged into a GFCI receptacle.; NOTE TO CATV SYSTEM INSTALLER:; Important Safety Instructions; All Rights Reserved. 2014 ©SunBriteTV® LLC
Page 2 Dear SunBriteTV Customer:Congratulations on the ownership of your SunBriteTV all-weather outdoor LCD TV, and welcome to the family of satisfied SunBrite customers. You are in great company, with thousands of homeowners and esteemed commercial facilities such as Yankee Stadium, Fenway Park, Di...
Page 3 - Cleaning Instructions:; See “Care of SunBriteTV” on page 36.; Precautions when Transporting the TV:; Carrying the television requires at least two people.; FCC Statement
SunBriteTV Model 4717HD and 5517HD Operator’s Manual Page 3 Cleaning Instructions: See “Care of SunBriteTV” on page 36. Attachments: Do not use attachments not specifically recommended by the manufacturer. Use of improper attachments can result in accidents. Power Source: SunBriteTV must operate on ...
Page 5 - Table of Contents
SunBriteTV Model 4717HD and 5517HD Operator’s Manual Page 5 Page 5 Table of Contents Important Safety InstructionsTable of ContentsSupplied AccessoriesTV Installation Choose a Location for the TV Rear Panel Internal Connect Source Rear Panel Connection Diagrams Side Panel and Front Panel ControlsRem...
Page 6 - Supplied Accessories; Unpacking
Page 6 Supplied Accessories Unpacking After unpacking the SunBriteTV television, please make sure that the following items are included in the carton and that they are in good condition. If items are damaged or missing, contact your dealer immediately. SunBriteTV LCD Television Speaker Module Remote...
Page 7 - TV Installation - Choose a Location for the TV; Choose a Location for the TV; Important: The TV must be installed at least 5
SunBriteTV Model 4717HD and 5517HD Operator’s Manual Page 7 TV Installation - Choose a Location for the TV Choose a Location for the TV Important: The TV must be installed at least 5 feet from pool, spa, or other body of water. The TV should be installed so the screen is not facing direct sunlight, ...
Page 8 - TV Installation – Rear Panel Internal Connect Source; Internal Connect Source; Figure 1; Rubber Sealing Gasket; TV Installation - Connecting the Power Cord; FEET AWAY FROM STANDING WATER , SUCH AS (BUT NOT LIMITED; Thumb Screw
Page 8 TV Installation – Rear Panel Internal Connect Source WARNING: Do not connect the power source before making connections. Internal Connect Source The Internal Connect Source allows you to easily connect to the Audio, Video, S-Video, SVGA, HDMI, Audio Out, and RF connectors. The Internal Connec...
Page 9 - TV Installation – Rear Panel Connections; Connections; For remote control using RS232 commands; DIGITAL AUDIO OUT; home theater receiver with digital input.
SunBriteTV Model 4717HD and 5517HD Operator’s Manual Page 9 TV Installation – Rear Panel Connections Connections 1. RS232 - For remote control using RS232 commands 2. IR WINDOW - For remote control using IR commands. 3. SERVICE PORT - These ports are for factory service only...DO NOT USE 4. HDMI 1 -...
Page 10 - Connection Descriptions:
Page 10 TV Installation – Rear Panel Connections Red Green Blue Yellow Green Red White Connection Descriptions: Cable Descriptions: 1080p, 1080i 720p, 480p 480i
Page 11 - Switching Sources for Ports:
SunBriteTV Model 4717HD and 5517HD Operator’s Manual Page 11 TV Installation – Rear Panel Connections Switching Sources for Ports: Your SunBrite TV offers several options when connecting your devices to the TV. The chart below will help you understand which source you switch to for each of the ports...
Page 12 - TV Installation – Rear Panel Connection Diagrams; Connecting to Cable or Antenna through VCR
Page 12 TV Installation – Rear Panel Connection Diagrams CONNECTING TO AN ANTENNA--(Continued) Connecting to Cable or Antenna through VCR 1. Make sure the power of the TV is turned off.2. Make sure there is an antenna or cable connection to the VCR already.3. Use a Coaxial RF cable and connect from ...
Page 13 - Connecting with
SunBriteTV Model 4717HD and 5517HD Operator’s Manual Page 13 TV Installation – Rear Panel Connection Diagrams CONNECTING TO A DVD PLAYER (Continued) 1. Make sure the power of the TV and your DVD player is turned off. 2. Obtain an S-Video Cable. Connect the S-Video connector to both your DVD player a...
Page 14 - CONNECTING TO A SATELLITE OR CABLE SET-TOP BOX
Page 14 TV Installation – Rear Panel Connection Diagrams CONNECTING TO A SATELLITE OR CABLE SET-TOP BOX 1. Make sure the power of the TV and your set-top box is turned off. 2. Connect a HDMI cable to the HDMI output of your set-top box and the other end to the HDMI port off the back of your TV. 3. T...
Page 16 - Connecting with Coaxial SPDIF Digital (Best)
Page 16 TV Installation – Rear Panel Connection Diagrams 1. Make sure the power of the TV and your receiver is turned off.2. Obtain a Coaxial SPDIF cable, connect it to your receiver’s coaxial SPDIF digital input and the Coaxial SPDIF connection on the LINE OUT port off the back of the TV. 3. Turn o...
Page 18 - Warning: TV must be installed at least 5 feet away from
Page 18 TV Installation - Connecting the Power Cord Power Turn on the TV by pressing the button once. Press the button again to turn off the TV. Input This button switches between the different sources of the TV. When the On-Screen Display (OSD) is active, this button acts as the enter button and co...
Page 19 - Remote Control Guide; About the Water-Resistant Remote Control; Picture In Picture/Picture On Picture
SunBriteTV Model 4717HD and 5517HD Operator’s Manual Page 19 Remote Control Guide About the Water-Resistant Remote Control The SunBriteTV Water-Resistant Remote Controller is engineered to give you many years of service.“Water-resistant” means that the remote control can be in water for short period...
Page 20 - On-Screen Display Functions; Menu; Via the Remote Control; Adjusting the On Screen Display (OSD) from the Remote; Via the TV Side Panel Buttons; Adjusting the On Screen Display from the TV Side Panel
Page 20 On-Screen Display Functions Menu - This button opens the OSD CH + p - This button changes the channel to a higher number and also functions the up direction of OSD buttons to move the cursor to the item to be selected. CH - q - This button changes the channel to a lower number and also funct...
Page 21 - On-Screen Display Menu; Channel Menu
SunBriteTV Model 4717HD and 5517HD Operator’s Manual Page 21 On-Screen Display Menu Your TV has been factory-set to plug-in and enjoy your programming. In the event you turn on the TV and get the message, “Please run Channel Auto Scan,” press your remote’s Menu button, press the Channel function and...
Page 23 - Adjusting On-Screen Displays – Channel Menu; Auto Scan; Favorite; qp
SunBriteTV Model 4717HD and 5517HD Operator’s Manual Page 23 Adjusting On-Screen Displays – Channel Menu The Channel Menu is available only when TV is selected as the source. To select TV as the source, push the SOURCE button on the remote repeatedly until TV comes up as the source in the onscreen d...
Page 25 - Adjusting On-Screen Displays – Picture Menu
SunBriteTV Model 4717HD and 5517HD Operator’s Manual Page 25 Adjusting On-Screen Displays – Picture Menu Picture Mode Press the qp buttons to highlight Picture Mode, then use t u to select Standard, Dynamic, Theater or Personal picture mode. Contrast Press the qp buttons to highlight Contrast adjust...
Page 26 - Adjusting On-Screen Displays – Audio Menu; Equalizer
Page 26 Adjusting On-Screen Displays – Audio Menu 1. Press qp buttons on the remote or CH+/CH- on the TV) to move the cursor to the item to be selected. 2. Press t u buttons on the remote or VOL+/VOL- on the TV to make the desired adjustments. 3. When your adjustments are complete, press MENU or EXI...
Page 27 - Adjusting On-Screen Displays – Time Menu
SunBriteTV Model 4717HD and 5517HD Operator’s Manual Page 27 Adjusting On-Screen Displays – Time Menu Sleep Timer Press the qp buttons to highlight Sleep Timer, then use t u to select Off or 5, 10, 15, 30, 60, 90, 120, 180 or 240 minutes. The TV will turn off automatically after the selected time ha...
Page 28 - Adjusting On-Screen Displays – Setup Menu
Page 28 Adjusting On-Screen Displays – Setup Menu 1. Press qp buttons on the remote or CH+/CH- on the TV) to move the cursor to the item to be selected. 2. Press t u buttons on the remote or VOL+/VOL- on the TV to make the desired adjustments. 3. When your adjustments are complete, press MENU or EXI...
Page 30 - Ambient Light Sensor; Ambient Sensor Value; Auto Backlight Floor; Backlight Sensor Floor
Page 30 Adjusting On-Screen Displays – Setup Menu (continued) Ambient Light Sensor Press the qp buttons to highlight the Ambient Light Sensor adjustment, then use t u to turn the ambient light sensor on and off. The ambient light sensor automatically measures ambient light level and adjusts the back...
Page 31 - Adjusting On-Screen Displays – Lock Menu; System Lock; Hotel Mode; Enter Password
SunBriteTV Model 4717HD and 5517HD Operator’s Manual Page 31 Adjusting On-Screen Displays – Lock Menu 1. Press qp buttons on the remote or CH+/CH- on the TV) to move the cursor to the item to be selected. 2. Press t u buttons on the remote or VOL+/VOL- on the TV to make the desired adjustments. 3. W...
Page 32 - Adjusting On-Screen Displays – Lock Menu / System Lock Function
Page 32 Adjusting On-Screen Displays – Lock Menu / System Lock Function Using System Lock Once you are in System Lock mode, press the qp buttons to highlight the different functions in the menu, then use t u to activate those features. Input Block To use the Input Block function, you must enter the ...
Page 33 - Adjusting On-Screen Displays – Lock Menu / Hotel Mode Function
SunBriteTV Model 4717HD and 5517HD Operator’s Manual Page 33 Adjusting On-Screen Displays – Lock Menu / Hotel Mode Function Using Hotel Mode Once you are in Hotel Mode, press the qp buttons to highlight the different functions in the menu, then use t u to activate those features. Picture Mode Press ...
Page 34 - Using the USB Input; Accessing the USB input; Selecting the Media on the USB Stick
Page 34 Using the USB Input Accessing the USB input Press the Source button on the remote or on the side control panel of the TV, then press qp buttons to highlight USB. Now press to select the USB input. The main USB menu seen below left will appear. Selecting the Media on the USB Stick From the ...
Page 35 - Troubleshooting
SunBriteTV Model 4717HD and 5517HD Operator’s Manual Page 35 Troubleshooting The following table contains the common problems and the solutions to these problems. Please check this list before you contact the technicians. Trouble Solutions No picture Check the following: Power cord is connected corr...
Page 36 - Care of SunBriteTV; Caring for the LCD Panel:; blown objects from scratching the surface of the panel.; To order a replacement Dust Cover or Cleaning Kit; General Cleaning; Snow and Ice; Use a soft brush and towel to remove snow and ice from the unit.; Intake Vent; Figure 3; Fiber Filter; Figure 2
Page 36 Care of SunBriteTV Caring for the LCD Panel: 1. Cleaning the LCD Panel: With your TV turned off, gently wipe the surface of the display panel with a damp (with water) microfiber, cotton or flannel cloth. (Do not use tissues, rags, sponges or paper towels because they may damage the screen an...
Page 37 - Specifications; SunBriteTV Model SB-4717HD
SunBriteTV Model 4717HD and 5517HD Operator’s Manual Page 37 LCD Screen 47-inch diagonal Color Active Matrix LED LCD Resolution 1920 x 1080 full-HD 1080p 120hz Frame Rate Aspect Ratio 16:9 Blacklight Brightness - Surface Luminance, white 700 nits (cd/m2) Ambient Light sensor - auto dimming Yes Contr...
Page 38 - Front View
Page 38 Screen 55-inch diagonal TFT Active Matrix LED LCD Resolution 1920 x 1080 full-HD 1080p, 120 Hz Frame Rate Blacklight Brightness - Surface Luminance, white 700 nits (cd/m2) Aspect Ratio 16:9 Contrast Ratio 1300:1 Viewing Angle 176 o Response Time 12 milliseconds TV formats 1080p, 1080i, 720p,...
Page 39 - SunBriteTV Pixel Quality Policy; SunBriteTV’s Pixel Quality Policy; products, and is not specific to SunBriteTV.; Features Information and Instructions; Internal Thermostatically-Controlled Heater; F. or lower. The heater remains on until the internal; Extreme Climate Warning; If temperatures below -24
SunBriteTV Model 4717HD and 5517HD Operator’s Manual Page 39 When programming a DirectTV, local cable universal remote control or Control system, you may find that SunBriteTV may not be on the list of TV manufacturers. If that is the case, your SunBriteTV supports SONY’s universal remote code. Progr...
Page 40 - To install the IR Emitter:; The end of the Emitter is to be mounted in front of
Page 40 Appendix A - RS232 Control Cable Pinout IR Emitter Installation To install the IR Emitter: The photo to the right s hows an IR Emitter* installed. The end of the Emitter is to be mounted in front of the IR Emitter Window. Place the emitter on the white tie-down block and use the tie-down to ...
Page 41 - Appendix B - RS232 Control Codes
SunBriteTV Model 4717HD and 5517HD Operator’s Manual Page 41 RS 232 Control codes SunbriteTV Com Spec: 9600,8,1,n Function ASCII HEX Command Received Response Command Executed Response from TV to control system from TV to control system Model Class ID [ESC]? 1B 3F [B3220AHD-X.XX] or na [B4610AHD-X.X...
