SunBrite SBWM46NA - Manuals

Page 2 - Installation Instructions; DISCLAIMER

SB-WM46 Installation Instructions 2 DISCLAIMER SunBriteTV LLC (SBTV) intend to make this manual accurateand complete. However, SBTV makes no claim that theinformation contained herein covers all details, conditions orvariations, nor does it provide for every possible contingency inconnection with th...

Page 3 - DIMENSIONS

Installation Instructions SB-WM46 3 DIMENSIONS 7.87 200.0

Page 4 - LEGEND

SB-WM46 Installation Instructions 4 LEGEND Tighten Fastener Apretar elemento de fijación Befestigungsteil festziehen Apertar fixador Serrare il fissaggio Bevestiging vastdraaien Serrez les fixations Loosen Fastener Aflojar elemento de fijación Befestigungsteil lösen Desapertar fixador Allentare il f...

Page 5 - TOOLS REQUIRED FOR INSTALLATION

Installation Instructions SB-WM46 5 TOOLS REQUIRED FOR INSTALLATION PARTS #2 1/2" (12.7mm) 1/4" (6.4mm) 7/16" (11.1mm) 1/2" (12.7mm) 3/8" (9.5mm) G (4) 5/32" A (1) B (2) C (2) S (4) H (1) I (1) J (1) F (4) E (1) K (12) L (13) M (4) N (1) P (1) Q (1) R (8) 3/16" 7/32" ...

Page 6 - ASSEMBLY and INSTALLATION; Install Arm Assembly/Wall Plate to Wall; Figure 1; Concrete Installation; Figure 2

SB-WM46 Installation Instructions 6 ASSEMBLY and INSTALLATION Install Arm Assembly/Wall Plate to Wall Wood Stud Installation WARNING: Failure to provide adequate structural strength for this component can result in serious personal injury ordamage to equipment! It is the installer’s responsibility t...

Page 7 - Cover Plate Installation; Figure 3; Figure 4

Installation Instructions SB-WM46 7 Cover Plate Installation 1. Install four cover plates (T) using four 10-32 x 1 1/8" Phillipspan machine screws (V) and four spacers (W). Insert screwinto cover plate and add the spacer before inserting thecover plate tab into the arm assembly/wall plate. (SeeF...

Page 8 - Figure 6; Install Faceplate to Display; Figure 9

SB-WM46 Installation Instructions 8 5. Use four removed screws and washers to secure interfacebrackets (C or D) to back of display. (See Figure 6) Figure 6 Install Faceplate Brackets to Faceplate 1. Align faceplate brackets (B) with faceplate (E) and slide intoposition. (See Figure 7) Figure 7 2. Us...

Page 9 - Display Installation

Installation Instructions SB-WM46 9 Figure 10 (F) x 4 (L) x 8 (K) x 8 2 1 (B) x 2 2. Using hex key (H), install eight 1/4 x 5/8" screws (K) througheight 1/4" washers (L) and faceplate brackets (B) into fourbacking plates (F). Tighten securely. (See Figure 10) Display Installation WARNING: Ex...

Page 10 - Cable Management; Adjustments; Pitch; Extension and Swivel Tension

SB-WM46 Installation Instructions 10 Cable Management CAUTION: Ensure that adequate cable slack exists for movement of display, and that cables will not be pinched byinstallation of covers (G) or screws (R). 1. Carefully insert cables into cavities located in lower portionsof mount arms. (See Figure...